- RC Helicopter
- Belt CP RC Helicopter
- E Smart RC Helicopter
- ESKY Lama 2 RC Helicopter
- Falcon 3D RC Helicopter
- HoneyBee RC Helicopter
- HoneyBee CP2 RC Helicopter
- HoneyBee King 2 RC Helicopter
- Protech Zoom 450 RC Helicopter
- Skylift RC Helicopter
- Trex 250 RC Helicopter
- Trex 450 RC Helicopter
- Trex 500 RC Helicopter
- Trex 700 RC Helicopter
- Walkera 52 RC Helicopter
- Zoom 425 RC Helicopter
- Flying Toys Division
- Helicopter Graveyard
- Spares
- Belt CP Spares
- Dragonfly 4 Spares
- E Smart Spares
- ESKY Lama 2 Spares
- Falcon 3D Spares
- Flying Toys Division Spares
- HoneyBee Spares
- HoneyBee CP2 Spares
- HoneyBee King 2 Spares
- Protech Zoom 450 Spares
- Skylift Spares
- Trex 250 Spares
- Trex 450 Spares
- Trex 500 Spares
- Trex 700 Spares
- Walkera 52 Spares
- Zoom 425 Spares
- Upgrades
- Accessories
- Flight Sims
- Radios
- Gyros
- Servos
- Batteries
- Chargers
- Brushless Motors
- ESC
- Heli Cams
- Receivers
- Stabilisation Units
- RC Tools
- Nitro Stuff
- Flight Cases
- Special Vouchers
Align Helicopter Kits
Align RCE 500
-
Summary
- Align RCE 500
- Headlock gyro
- Voltage:4.2-7.0 V
- Consumption:33mA
- Rating :DC+4~+6V
- Temp range:-5
-
-
Summary
Trex 450 SE V2 KIT
-
-
Specifications
Length:650mm
Height:230mm
Main Blade Length:325mm
Main Rotor Diameter:700mm
Tail Rotor Diameter:150mm
Motor Pinion Gear:12T/13T
Main Drive Gear:150T
Autorotation Tail Drive Gear:106T
Tail Drive Gear:25T
Drive Gear Ratio: 1:12.5:4.24/1:11.5:4.24
Weight(without main blades):450g
Flying Weight: Approx 800g
-
Summary
- T-REX 450SE V2 CDE
- KX015043A (black) OR
- KX015042A (silver)
- 325 Carbon blades
- 430XL 3700kv brushless
- BL-35X ESC
- 11.1V 2100mAh 20C lipo
-
-
Summary
Trex 450 SE V2 RTF Helicommand
-
-
Features
TREX 450 SETUP DVD INCLUDES THESE VIDEOS:
-Trex SE frame build
-Installing HS65MG servos in an SE
-General Maintenance Ad-hoc Video
-Installing the NEW SE tail hub
-Modifying the new SE tail hub to make it much better
-Thread Lock 101
-Installing HS56 Servos in a Trex SE
-Ball Links 101
-Soldering Bullet (Motor) Connectors 101
-Soldering Deans Connectors 101
-Trex Electronics placement and overview
-CCPM Setup Part 1
-CCPM Setup Part 2
-Pitch and Throttle Curves 101
-401 gyro setup
-Align ESC setup
-Blade Balancing
-Canopy Trimming 101
-Servo Repair 101
-Replacing the Align Auto-rotation Clutch
-Blade Tracking 101
-Programming the Futaba 9Z for a heli
TREX Helicommand:
This is an exclusive DVD to heliguy.com showing John -the man who built your heli set up the helicommand - a fantastic guide. -
Specifications
Length:650mm
Height:230mm
Main Blade Length:325mm
Main Rotor Diameter:700mm
Tail Rotor Diameter:150mm
Motor Pinion Gear:12T/13T
Main Drive Gear:150T
Autorotation Tail Drive Gear:106T
Tail Drive Gear:25T
Drive Gear Ratio: 1:12.5:4.24/1:11.5:4.24
Weight(without main blades):450g
Flying Weight: Approx 800g
-
Summary
- Align Trex 450 SE V2 Carbon
- Ready To fly
- Custom Built:
- 1 x Align Aluminium Case
- 1 x Spektrum DX7 TX
- 1 x Spektrum TX Charger
- 1 x Spektrum AR7000 RX
- 1 x Align 430XL Motor
- 1 x Align BL-35X ESC
- 1 x Align 2100mah 22c Lipo
- 1 x Futaba GY401 Gyro
- 1 x Futaba S9650 Tail Servo
- 1 x HS1250 Metal tail mount
- 3 x Hitec HS65MG Servos
- 1 x Robbe Hellicommand 3D
- 1 x Align 325 Carbon Blades
- 1 x 2/3 Balanced Charger
- 1 x Mains plug for Charger
- FREE TRAINING KIT
- FREE "TREX 450 SETUP" DVD
- HELICOMMAND SETUP GUIDE
-
-
Summary
Trex 450 S CF Kit
-
-
Features
TREX 450 SETUP DVD INCLUDES THESE VIDEOS:
-Trex SE frame build
-Installing HS65MG servos in an SE
-General Maintenance Ad-hoc Video
-Installing the NEW SE tail hub
-Modifying the new SE tail hub to make it much better
-Thread Lock 101
-Installing HS56 Servos in a Trex SE
-Ball Links 101
-Soldering Bullet (Motor) Connectors 101
-Soldering Deans Connectors 101
-Trex Electronics placement and overview
-CCPM Setup Part 1
-CCPM Setup Part 2
-Pitch and Throttle Curves 101
-401 gyro setup
-Align ESC setup
-Blade Balancing
-Canopy Trimming 101
-Servo Repair 101
-Replacing the Align Auto-rotation Clutch
-Blade Tracking 101
-Programming the Futaba 9Z for a heli -
Specifications
Length: 650mm
Height: 228mm
Main Blade Length: 325mm
Main Rotor Diameter: 700mm
Tail Rotor Diameter: 150mm
Motor Pinion Gear: 12T/13T
Main Drive Gear: 150T
Autorotation Tail Drive Gear: 106T
Tail Drive Gear: 25T
Drive Gear Ratio: 1:12.5:4.24/1:11.5:4.24
Weight (w/o main blades): 400g
Flying Weight: 650~680g Approx
-
Summary
- T-REX 450 S CF
- KX015063TA
- 325 Carbon blades
- 430XL 3700kv brushless
- BL-35X ESC
- 2100 mAh 20C battery included.
-
-
Summary
KX850163TA Align LiPo Balancer RCE 6BA
-
Features
1.Separate balancing and charging ports eliminating charging amperage limit due to balancing wires� gauge.
2.Dual mode balancer: Can be used as stand alone balancer, or concurrently with a separate charger.
3. Automatically balance 2~6 cells li-poly packs.
4.Balancing voltage resolution accurate to �0.005V.
5.Individual cells� balancing status displayed through LEDs.
6.Overcharging prevention circuitry with cutoff set at 4.26V/cell for additional safety, minimizing potential damages to the cells.
7.Low voltage cutoff set at 3.3V/cell to prevent over discharging of cells. -
Specifications
Lithium polymer cell count: 2~6 cells in series configuration
Balancing activation voltage:
Automatic:>0.03V imbalance
Manual: >0.01V imbalance
Discharge current during balancing: 350mA
Imbalance control voltage: +/-0.005V
Maximum cell voltage cut off: 4.26V
Low voltage cut off: 3.3V
Balancing voltage resolution: +/-0.005V
Size:83x45x19mm
Weight:120g
-
Summary
- KX850163TA
- Align
- LiPo Balancer
- RCE 6BA
-
-
Summary
KX850166TA Align RCC-6SX Intelligent Multifunction Charger Combo
-
Features
RCC-6SX Intelligent multifunctional Charger/Discharger/Blancer:
1. Apply to Ni-Cd, Ni-MH, Li-Ion, and Li-Poly batteries.
2.Special aluminum alloy anodic treatment outer case for good heat dissipation and great quality.
3.Use heat sink for the heat dissipation and extend the use life.
4. Automatic Ni-Cd/Ni-MH battery discharge/ charge cycle for battery activation.
5. Use RCE-6BA Li-Po Balancer to protect the batteries during charging, and extend the battery life, to improve the performance of battery and increase the power.
RCE-6BA Li-Po Balancer:
1.Separate balancing and charging ports eliminating charging amperage limit due to balancing wires’ gauge.
2.Dual mode balancer: Can be used as stand alone balancer, or concurrently with a separate charger.
3. Automatically balance 2~6 cells li-poly packs.
4.Balancing voltage resolution. -
Specifications
RCC-6SX Intelligent multifunctional Charger/Discharger:
â— -
Summary
- Intelligent Charger + Balancer
- RCC-6SX
- RCE-6BA
- KX850166TA
-
-
Summary
Trex 250 Combo
-
-
Features
●Electric power system.
●Simple and light weight design provides awesome flight performance and extreme 3D capability.
●Rigid carbon fiber frame design.
●Beautiful factory painted fiberglass canopy.
●Φ3.5mm main shaft.
●Φ2.5mm Feathering shaft.
●Φ8.5mm Tail boom.
●Center of gravity of Battery tray designed close to the rotor head. ●Tail rotor drive belt system. -
Specifications
●Length:430mm
●Height:187mm
●Main Blade Length:200/205mm
●Main Rotor Diameter:450/460mm
●Tail Rotor Diameter:108mm
●Motor Ponion Gear:15T
●Main Drive Gear:120T
●Tail Drive Gear:28T
●Drive Gear Ratio:1:8:4.28
●Weight(w/o power system):138g
●Flying Weight:Approx 330g
●Color carton:27.3x10x6.6cm
-
Summary
- Trex 250 Combo
- KX019001A
- ●T-REX 250 Kit Set x 1
- ●200 Main blades x 1
- ●205 Main blades x 1
- ●RCE-BL15X 15A Brushless ESC x 1
- (Build-in 5~6V adjustable BEC)
- ●RCM-BL250 Brushless motor(3400KV) x 1
- ●Motor ponion gear 15T x 1
- ●DS410 Digital servo x 3
- ●40 Tail blade x 1
- ●42 Tail blade x 1
- ●Clip x 1
- ●#00 Phillips screw driver x 1
- ●0.9 Hexagon screw driver x 1
- ●Dial pitch gauge pad x 1
-
-
Summary
Trex 500 RTF
-
-
Specifications
Length:850mm
Height:310mm
Main Blade Length:425mm
Main Rotor Diameter:970mm
Tail Rotor Diameter:200mm
Motor Pinion Gear:12T/13T
Main Drive Gear:162T
Autorotation Tail Drive Gear:145T
Tail Drive Gear:31T
Drive Gear Ratio: 1:13.5:4.68/1:12.46:4.68
Weight: 935g
Flying Weight: Approx 1700g
-
Summary
- Trex 500 CF
- Ready to Fly
- Custom Built:
- 1 x Spektrum DX7 Tx
- 1 x Tx Charger
- 1 x Spektrum AR7000 RX
- 1 x Align Outrunner Motor
- 1 x Align 60A ESC
- 1 x Futaba GY401 Gyro
- 1 x Align S9257 Tail Servo
- 3 x Hitex HS-5245MG Servos
- 1 x Align 425 Carbon Blades
- 1 x 22.2V 2600mAh 25C Lipo
- 1 x IMAX B6 Charger
- 1 x Mains Plug for IMAX
-
-
Summary
Trex 500 CF KIT
-
-
Specifications
Length:850mm
Height:310mm
Main Blade Length:425mm
Main Rotor Diameter:970mm
Tail Rotor Diameter:200mm
Motor Pinion Gear:12T/13T
Main Drive Gear:162T
Autorotation Tail Drive Gear:145T
Tail Drive Gear:31T
Drive Gear Ratio: 1:13.5:4.68/1:12.46:4.68
Weight: 935g
Flying Weight: Approx 1700g
-
Summary
- Trex 500 CF Kit
- KX017001TA
- Carbon Fibre frame
- 425 Carbon blades
- Outrunner 1600KV Motor
- BL60 G 60A ESC
-
-
Summary
Trex 700 KIT
K10263 Align Aluminium Carry case
-
-
Summary
- K10263
- Align Trex Case
- D:698x203x284(mm)
- W:3.4kg
- Aluminium Shell
- rotective Foam Interior
- Shoulder Strap
- Secure Locks
-
-
Summary
H50003T Main Gear Case Set
-
Summary
- H50003T
- Main Gear Case Set
-
-
Summary
Trex 250 Kit
-
-
Specifications
Trex 250 Kit Combo:
KX019000TA
T-REX 250 Kit Set x 1
200 Main blades x 1
205 Main blades x 1
RCE-BL15X 15A Brushless ESC x 1
(Build-in 5~6V adjustable BEC)
RCM-BL250 Brushless motor(3400KV) x 1
Motor ponion gear 15T x 1
40 Tail blade x 1
-
Summary
- Trex 250 Kit
- Pre-order!
-
-
Summary
Trex 250 Super Combo
-
-
Features
●Electric power system.
●Simple and light weight design provides awesome flight performance and extreme 3D capability.
●Rigid carbon fiber frame design.
●Beautiful factory painted fiberglass canopy.
●Φ3.5mm main shaft.
●Φ2.5mm Feathering shaft.
●Φ8.5mm Tail boom.
●Center of gravity of Battery tray designed close to the rotor head. ●Tail rotor drive belt system. -
Specifications
●Length:430mm
●Height:187mm
●Main Blade Length:200/205mm
●Main Rotor Diameter:450/460mm
●Tail Rotor Diameter:108mm
●Motor Ponion Gear:15T
●Main Drive Gear:120T
●Tail Drive Gear:28T
●Drive Gear Ratio:1:8:4.28
●Weight(w/o power system):138g
●Flying Weight:Approx 330g
●Color carton:27.3x10x6.6cm
-
Summary
- Trex 250 Super Combo
- KX019002A
- ●T-REX 250 Kit Set x 1
- ●200 Main blades x 1
- ●205 Main blades x 1
- ●RCE-BL15X 15A Brushless ESC x 1
- (Build-in 5~6V adjustable BEC)
- ●RCM-BL250 Brushless motor(3400KV) x 1
- ●Motor pinion gear 15T x 1
- ●GP700 Head Lock Gyro x 1
- ●DS420 Digital servo x 1
- ●DS410 Digital servo x 3
- ●40 Tail blade x 1
- ●42 Tail blade x 1
- ●Clip x 1
- ●#00 Phillips screw driver x 1
- ●0.9 Hexagon screw driver x 1
- ●Dial pitch gauge pad x 1
-
-
Summary
Trex 500 ESP Superior Combo
-
Features
1.Electric power system.
2.Simple and light weight design provides awesome flight performance and extreme 3D capability.
3.Rigid carbon fiber frame design.
4.Beautiful factory painted fiberglass canopy.
5.Rotor head/tail with thrust bearings.
6.Direct-to-swash CCPM linkage.
7.Center of gravity of Battery tray designed close to the rotor head.
8.High efficiency torque tube drive system.
9.Fully driven tail auto rotation system.
10.Tail servo boom mount.
-
Specifications
●Length:840mm
●Height:310mm
●Main Blade Length:425mm
●Main Rotor Diameter:970mm
●Tail Rotor Diameter:200mm
●Motor Ponion Gear:12T/13T
●Main Drive Gear:162T
●Autorotation Tail Drive Gear:145T
●Tail Drive Gear:31T
●Drive Gear Ratio:1:13.5:4.68/1:12.46:4.68
●Weight(w/o power system):1370g
●Flying Weight:Approx 1700g
●Color carton:48.3x18.7x9.8cm
●Outer carton:58x50x42cm ,12sets/ctn
-
Summary
- KX017008A
- T-REX 500 ESP Kit Set
- 425 carbon fiber blades
- RCE-BL60G 60A Brushless ESC
- 500L Brushless motor(1600KV)
- Motor ponion gear 12T & 13T
- DS510 Servo X 3
-
-
Summary
Shopping Cart
You have 0 items
Your total is £0.00
- Subtotal:
- £0.00
- VAT Cost:
- £0.00
Change currency to:
Send To A Friend
Print This Page