- RC Helicopter
- Belt CP RC Helicopter
- E Smart RC Helicopter
- ESKY Lama 2 RC Helicopter
- Falcon 3D RC Helicopter
- HoneyBee RC Helicopter
- HoneyBee CP2 RC Helicopter
- HoneyBee King 2 RC Helicopter
- Protech Zoom 450 RC Helicopter
- Skylift RC Helicopter
- Trex 250 RC Helicopter
- Trex 450 RC Helicopter
- Trex 500 RC Helicopter
- Trex 700 RC Helicopter
- Walkera 52 RC Helicopter
- Zoom 425 RC Helicopter
- Flying Toys Division
- Helicopter Graveyard
- Spares
- Belt CP Spares
- Dragonfly 4 Spares
- E Smart Spares
- ESKY Lama 2 Spares
- Falcon 3D Spares
- Flying Toys Division Spares
- HoneyBee Spares
- HoneyBee CP2 Spares
- HoneyBee King 2 Spares
- Protech Zoom 450 Spares
- Skylift Spares
- Trex 250 Spares
- Trex 450 Spares
- Trex 500 Spares
- Trex 700 Spares
- Walkera 52 Spares
- Zoom 425 Spares
- Upgrades
- Accessories
- Flight Sims
- Radios
- Gyros
- Servos
- Batteries
- Chargers
- Brushless Motors
- ESC
- Heli Cams
- Receivers
- Stabilisation Units
- RC Tools
- Nitro Stuff
- Flight Cases
- Special Vouchers
Futaba Radios and Gyros
Futaba 14MZ
-
Features
Major Features:
• PPM, 1024 PCM and 2048 PCM transmission
• 14 channels
• Dual processors
• HVGA full colour LCD touch screen
• Wireless frequency setting system(WFSS)
• Lithium Ion transmitter battery
• Windows CE programming processor
• Compact Flash Card data storage and transfer
• Voice / music recording and playback
• Sticks with twin ballraces on each axis
• Replaceable switches (push, sprung, momentary options)
• World `s smallest 14 channel synthesised receiver -
Summary
- PPM, 1024 and 2048 PCM
- 14 channel RX & TX
- Case
- Charger
- Dual processors
- HVGA LCD touch screen
- WFSS
- Lithium Ion battery
- Windows CE programming processor
- Compact Flash Card data storage and transfer
- Voice recording and playback
- Sticks with twin ballraces
- Neck Strap
- FREE UK delivery
- 3 day delivery
-
Summary
Futaba 136F Receiver
Futaba GY401 Gyro
-
Specifications
a manual for this gyro is available in our manual section:- http://www.heliguy.com/helicopter_manuals.html -
Summary
- AVCS - Heading Hold System
- SMM Silicone Sensor
- Remote Gain
- Gyro Direction Switch
- Servo limit trimmer
- Control delay trimmer
- DS mode switch high rate pulse
- Conductive, anti EMC plastic case
- 30 grams
- 27mm*27mm*20mm
-
Summary
Futaba GY502
-
Summary
- AVCS - Heading Hold System
- SMM Silicone Sensor
- 8-character Dot Matrix Display
- 3D Mode (to be confirmed)
- Remote Gain, 2 stage
- PMX Programmable with 9Z Tx
- Gain Tracking
- Rudder Stick Control Gain
- Gyro Direction adjustment
- Servo Limit Setting
- Control Delay
- Trim Reset
- Servo Frame Rate adjustment
- Conductive, anti EMC plastic case
-
Summary
Futaba S3154 digital
-
Summary
- Futaba S3154
- Digital
- Dimensions:21.8 x 11.7 x 19.8mm
- Speed:0.09s/60 deg (at 6V)
- Torque:1.7kg/cm (at 6V)
- Weight: 7.9g
-
Summary
Futaba S3003 Servo
Futaba R146iP
S9650 Digital servo
S9254 Digital servo
-
Specifications
Tail 0.06s/3.4Kg Torque 4.8 Kg/cm Speed 0.06 sec/60
-
Summary
- S9254 Digital Servo
- Tail 0.06s/3.4Kg
- Torque 4.8 Kg/cm
- Speed 0.06 sec/60
-
Summary
Futaba 6EX 2 4 GHz
-
Features
Continuious Channel Shifting
Pre-Vision
Dual Antenna Diversity
Easy Link
Custom-Developed IC Chips
Compact, "All-in-One" Receivers
Over 2x Less Minimum Latency
100x Faster Antenna Switching
Stronger, More Robust Link
Hassle-Free Fail Safe
-
Specifications
INCLUDES:
Futaba 6EX Transmitter
FBC-19B(4) Battery Charger
R606FS Receiver
SPECIFICATIONS:
Transmitter:
Power Supply: 9.6V
Current Drain: 170mA
Receiver:
Size: 40 x 27 x 9mm
Power Requirement: 4.8 - 6V
Current Drain: 80mA (at no signal)
Weight: 7g (without case)
-
Summary
- 6-Channel 2.4GHz System
- R606FS receiver
- TX charger
- No servos
-
Summary
Futaba G190 gyro
-
Summary
- Futaba G190
- Length: 22.2 mm
- Width: 22.8 mm
- Height: 8.9 mm
- Weight 6.8 g
- Operating voltage: 4.8 to 6.0VDC
- Current drain: 15mA at 4.8V
- Special mounting case
-
Summary
Futaba GY401 including 9254
-
Summary
- Futaba GY401
- Futaba SG9254 digital servo
- Instructions
- Mounting pads
- Tool
- Summary:
- AVCS - Heading Hold System
- SMM Silicone Sensor
- Remote Gain
- Gyro Direction Switch
- Servo limit trimmer
- Control delay trimmer
- DS mode switch high rate pulse
- Conductive, anti EMC plastic case
-
Summary
Futaba FF7 2.4GHz
-
Features
Dial `n KeyTM programming
Airplane/heli software
Assignable switches/functions
Up/down timer
Mode 1-4 selectable (modes 3 and 4 available via transmitter software)
Large 72 x 32 LCD screen with adjustable contrast
10-model memory
6-character model naming
Digital trims, trim memory, EPA, subtrims and servo reversing (all channels)
Dual/Triple rates* (aileron/elevator/rudder)
Exponential (aileron/elevator/rudder)
Adjustable throttle cut
Fail-safe
NT8S600B 600mAh Tx NiCd w/dual-output charger
Trainer system (cord required)
Flap switch
Retract switch
Variable rate knob (channel 6) -
Specifications
Helicopter Advanced Menu:
Governor select makes it possible to match rpm/blade speed to maneuvers
Swash to throttle mixing helps heli pilots keep their rpm steady
3 programmable mixes
Throttle curve (5-point normal, idle up 1 & 2)
Pitch curve (5-point normal, idle up 1 & 2)
Revo mixing
Gyro mixing
Hovering throttle
Hovering pitch
Throttle hold
Trim offset
6 swash plate set-ups (5 CCPM options)Airplane Advanced Menu: Ailevator feature simplifies dual servo set-ups on elevators
3 programmable mixes
Flaperon
Flap trim
Air brake
Elevator to flap mixing
V-tail mixing
Elevon mixing
Aileron to rudder mixing
Snap roll -
Summary
- Futaba Field Force 7
- 2.4GHz Spread Spektrum
- 1 x T7C TX Mode 2
- 1 x R617FS 7CH RX
- 1 x 1100mAh 9.6v NiCd TX Battery
- 1 x TX Charger
-
-
Summary
Futaba R617FS 2.4GHz 7 Channel Receiver
Shopping Cart
You have 0 items
Your total is £0.00
- Subtotal:
- £0.00
- VAT Cost:
- £0.00
Change currency to:































Send To A Friend
Print This Page