- RC Helicopter
- Belt CP RC Helicopter
- ESKY Big Lama RC Helicopter
- ESKY Dauphin RC Helicopter
- ESKY KOB RC Helicopter
- ESKY Lama RC Helicopter
- ESKY Tandem Rotor RC Helicopter
- Falcon 3D RC Helicopter
- HoneyBee RC Helicopter
- HoneyBee CP3 RC Helicopter
- HoneyBee King 3 RC Helicopter
- Interceptor 400 RC Helicopter
- Trex 250 RC Helicopter
- Trex 450 RC Helicopter
- Trex 500 RC Helicopter
- Trex 600 RC Helicopter
- Trex 700 RC Helicopter
- Helicopter Graveyard
- Spares
- Belt CP Spares
- Dragonfly 4 Spares
- E Smart Spares
- ESKY Big Lama Spares
- ESKY Dauphin Spares
- ESKY KOB Spares
- ESKY Lama Spares
- Falcon 3D Spares
- Flying Toys Division Spares
- HoneyBee Spares
- HoneyBee CP3 Spares
- HoneyBee King 3 Spares
- Interceptor 400 Spares
- Protech Zoom 450 Spares
- Skylift Spares
- Trex 250 Spares
- Trex 450 Spares
- Trex 450 Pro Spares
- Trex 500 Spares
- Trex 600 Spares
- Trex 700 Spares
- Walkera 52 Spares
- Zoom 425 Spares
- Upgrades
- Accessories
- Flight Sims
- Radios
- Gyros
- Servos
- Lipo Batteries
- Chargers
- Brushless Motors
- ESC
- Heli Cams
- Receivers
- Stabilisation Units
- RC Tools
- Nitro Stuff
- Flight Cases
- Pinion Gear
- Special Vouchers
Hitec Radio and Receivers
Hitec HS5065MG Digital Servo
£26.38
-
Specifications
Motor Type: 3-pole
Bearing Type: Top BB
Speed: 0.14 / 0.11 sec @ 60 deg.
Torque:1.8 / 2.2 kg.cm
Size:23.60 x 11.60 x 24.00mm
Weight:11.90g
-
Summary
- Hitec HS5065MG
- Programmable
- Digital
- High Torque Feather
-
-
Summary
Hitec Electron 6 Receiver
£28.74
-
Summary
- 6 channel FM receiver
- Dual conversion
- Narrow band
- 45.5*22.5*15 (mm)
- 17g (without xtal)
- 13g (without case)
- Low voltage
- Gold plated pins
- 1 mile range
-
-
Summary
Hitec HS65HB
£15.63
-
Summary
- Motor Type : 3 Pole Neodynium magnet
- Bearing Type : Top Ball Bearing
- Torque 4.8/6.0v: 1.8 / 2.2 kg.
- Speed 4.8/6.0v : 0.14 / 0.11 second
- Size : . 24 x 12 x 24mm
- Weight : 11.2 g
-
-
Summary
Hitec HS56HB
£16.89
-
Summary
- Motor Type : 3 Pole Ferrite
- Bearing Type : Top Ball Bearing
- Torque 4.8/6.0v : 1.0 / 1.2 kg.
- Speed 4.8/6.0v : 0.12 / 0.10 second
- Size : 23 x 12 x 24mm
- Weight : 10.7 g.
- Perfect HELI choice
-
-
Summary
Hitec HS65MG
£18.98
-
Specifications
Dimensions: 12.0mm x 24.0mm x 24.0mm
Weight: 11.2g
Speed : 0.13sec
Torque: 1.90kg/cm
Ball Raced: Yes
-
Summary
- Hitec 65MG
- Metal Gears
- High Torque
- Shock Resistant
-
-
Summary
Hitec HS65MG x 4
£68.99
-
Specifications
Dimensions: 12.0mm x 24.0mm x 24.0mm
Weight: 11.2g
Speed : 0.13sec
Torque: 1.90kg/cm
Ball Raced: Yes
-
Summary
- Hitec HS-65MG
- Four Servo Pack
- Ideal Design for T REX `s
- Metal Gears
- High Torque
- Shock Resistant
-
-
Summary
Hitec HS 65MG x 3
£54.99
-
Summary
- HS65MG *3
- cyclic servo combo
-
-
Summary
Hitec HS 5245MG Digital Servo
£26.32
-
Features
Digital Servo Functions that can be programmed with Hitec HFP-20 digital servo programer:
Factory Default Reset
Dead Band Width
Direction of Rotation
Speed
Fail Safe On or Off
Fail Safe Preset Position
End Point
Neutral Point
-
Summary
- Hitec
- HS-5245MG
- Programmable
- Digital Mini
- Servo
-
-
Summary
Hitec HS82MG
£16.63
-
-
Summary
- Gear: Metal Gear 56386
- Motor Type: 3 Pole Ferrite
- Bearing Type: None
- Operating Speed @ 4.8V: 0.12 sec/60°
- Operating Speed @ 6.0V: 0.10 sec/60°
- Output Torque @ 4.8V: 2.8 Kg-cm
- Output Torque @ 6.0V: 3.4 Kg-cm
- Size: 29.8 x 12.0 x 29.6 mm
- Weight: 19.0 g
-
-
Summary
Hitec HPP-21 PC Programmer for Hitec Digital Servos
£19.99
-
Features
HPP-21
PC Programmer for Hitec Digital Servos
PC Based Digital Servo Programmer and Tester
Programs all Hitec Digital Servo Parameters
Tests all Brands of Servos
Free Downloadable Software
USB PC Connection
-
Summary
- Hitec HPP-21
- PC Programmer
- Hitec Digital Servos
- USB Interfaced
- Easy Operation
- 4.8v Battery and USB Cable required (not included)
-
-
Summary
Hitec HFP-20 Digital Servo Programmer
£60.00
-
Features
Reset to factory default
End and center points
Direction of Rotation
Dead Band Width
Failsafe Point
Speed (reduction only)
Overload Protection (G2 Servos)
Resolution Mode Setting (G2 Servos) -
Summary
- Hitec HFP-20
- Digital Servo Programmer
-
-
Summary
Hitec HS-5055MG Digital Servo
£15.99
-
Features
Programable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points (up to 120 degrees)
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points
- Resolution (default is set at high)
- Overload Protection (default is off)
-
Specifications
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 4.8-6.0 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.20 sec/60° at no load
Operating Speed (6.0V): 0.17 sec/60° at no load
Stall Torque (4.8V): 1.3kg/cm
Stall Torque (6.0V): 1.6kg/cm
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Idle Current Drain (4.8V): 3mA at stop
Idle Current Drain (6.0V): 3mA at stop
Dead Band Width: 2usec
Motor Type: Carbon Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Plastic
Gear Type: Metal Gears
Connector Wire Length: 178mm
Dimensions: 22.8 x 11.6 x 24mm
Weight: 9.5g
-
Summary
- Hitec
- HS-5055MG
- Metal Gear
- Digital Servo
-
-
Summary
Hitec HS-5056MG Digital Servo
£21.25
-
Features
Programable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points (up to 120 degrees)
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points
- Resolution (default is set at high)
- Overload Protection (default is off)
-
Specifications
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 4.8-6.0 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.12 sec/60° at no load
Operating Speed (6.0V): 0.10 sec/60° at no load
Stall Torque (4.8V): 1.2kg/cm
Stall Torque (6.0V): 1.4kg/cm
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Idle Current Drain (4.8V): 3mA at stop
Idle Current Drain (6.0V): 3mA at stop
Dead Band Width: 2usec
Motor Type: Carbon Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Plastic
Gear Type: Metal Gears
Connector Wire Length: 178mm
Dimensions: 22.6 x 11.6 x 24mm
Weight: 12.7g
-
Summary
- Hitec
- HS-5056MG
- Metal Gear
- Digital Servo
- Programmable
-
-
Summary
Hitec HPP-21 Plus+ Servo Programmer
£22.99
-
Features
Fail Safe on/off
Direction of rotation
Resolution Setup (G2 Hitec Servos Only)
Travel Speed
Center, End and Fail Safe Point
Dead Band Width
OLP Rate (Overload Protection Rate, G2 Hitec Servos)
“Save and Open” File Options
Reset Servo to Factory Default Program -
Summary
- HPP-21 Plus
- PC and Field Programmer for Hitec Digital Servos
- Digital Servo Field/PC Programmer and Tester
- Programs all Hitec Digital Servo Parameters
- Tests all Brands of Servos
- Free Downloadable Software
- USB PC Connection
- Less Expensive Alternative to HFP-20
-
-
Summary
Shopping Cart
You have 0 items
Your total is £0.00
- Subtotal:
- £0.00
- VAT Cost:
- £0.00
Change currency to:
Send To A Friend
Print This Page