- RC Helicopter
- Belt CP RC Helicopter
- E Smart RC Helicopter
- ESKY Lama 2 RC Helicopter
- Falcon 3D RC Helicopter
- HoneyBee RC Helicopter
- HoneyBee CP2 RC Helicopter
- HoneyBee King 2 RC Helicopter
- Protech Zoom 450 RC Helicopter
- Skylift RC Helicopter
- Trex 250 RC Helicopter
- Trex 450 RC Helicopter
- Trex 500 RC Helicopter
- Trex 700 RC Helicopter
- Walkera 52 RC Helicopter
- Zoom 425 RC Helicopter
- Flying Toys Division
- Helicopter Graveyard
- Spares
- Belt CP Spares
- Dragonfly 4 Spares
- E Smart Spares
- ESKY Lama 2 Spares
- Falcon 3D Spares
- Flying Toys Division Spares
- HoneyBee Spares
- HoneyBee CP2 Spares
- HoneyBee King 2 Spares
- Protech Zoom 450 Spares
- Skylift Spares
- Trex 250 Spares
- Trex 450 Spares
- Trex 500 Spares
- Trex 700 Spares
- Walkera 52 Spares
- Zoom 425 Spares
- Upgrades
- Accessories
- Flight Sims
- Radios
- Gyros
- Servos
- Batteries
- Chargers
- Brushless Motors
- ESC
- Heli Cams
- Receivers
- Stabilisation Units
- RC Tools
- Nitro Stuff
- Flight Cases
- Special Vouchers
Xtreme Upgrades Products
ESL023 V2 Flexible tail with engine YELLOW
-
Summary
- ESL023
- Impact resistant tail frame
- Replica engine and side bucket
-
-
Summary
ESL041 LED Fly Bar BLUE
-
Summary
- ESL041
- 1 x LED BLUE Fly paddle
- 1 x Battery
- 1 x Fly-bar rod (Long)
- 1 x Fly-bar central hub
-
-
Summary
EA002 Blade tracking colour tapes
-
Summary
- EA002
- 10 x Blade Tracking Colour Sticker Tapes (65mm x 5mm)
-
-
Summary
Fiber Plastic Blade 275mm - White (For King 2)
-
Summary
- Fiber Plastic Blade 275mm
- White
- For King 2
- ESK003-W
-
-
Summary
Fiber Plastic Blade 275mm - Yellow (For King 2)
-
Summary
- Fiber Plastic Blade 275mm
- Yellow
- For King 2
- ESK003-Y
-
-
Summary
Metal Head Stopper (for Esky King 2)
-
Summary
- Metal Head Stopper
- For Esky King 2
- ESK004
-
-
Summary
43t belt pulley with idler
-
Summary
- Belt and idler
- Changes gear ratio
- Creates faster tail spin
- 15 grams
-
-
Summary
LP2S850 Xtreme Li-Po 7.4v 850mah 20c
-
Specifications
Pack: 850mAh 7.4V
Connector: JST Plug, Balance Charge Plug
Size: 56x30x15mm
Weight: 45g
Discharge: 18-20C
Suitable: RC Boat, RC Plane, RC Helicopter
-
Summary
- Xtreme Production
- 850Mah
- 20c
- 7v
- LAMA
-
-
Summary
ESK007 400X Brushless Motor
-
Specifications
4000kv
20A current draw
25.4mm diameter
2.3mm shaft
-
Summary
- ESK007
- 400X
- Brushless Motor
- 4000KV
- 20A
-
-
Summary
EA-023 Lipo Safe Bag
-
Features
The LiPo Safe is bag made of special fire-resistant materials that has the ability to contain a lithium polymer battery fire or charging mishap. place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they `re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe `s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe.
The LiPo Safe is sealed with a thick, industrial strength, Velcro flap. The current LiPo Safe is designed to handle a lithium polymer battery mishap from 1 to 6 lipoly cells (1s to 6s).
Before using the LiPo Safe you must read and understand the LiPo Safe Safety Instructions. We assume absolutely no liability for any damages of any kind - even with proper use. When using the LiPo Safe, you must always remember to abide by safe lithium polymer battery charging and safety rules and never leave charging li-polymer batteries unattended. Never leave damaged lipos unattended. Always use the LiPo Safe on a non-flammable surface and in a ventilated area. Avoid damage to the LiPo Safe and not use the LiPo Safe if it is damaged.
LIPO SAFE USING PRECAUTIONS
Ensure that charger rate is properly set and polarity is correct
Attach charging leads to battery
Place battery in LiPo Safe towards the bottom
Place LiPo Safe on non-flammable surface
Route charge leads through vent at the top seam of the LiPo Safe
Close top flap of LiPo Safe and press hook and loop closure fully closed
Charge battery using proper charging practices
Always practice extreme caution when charging and never leave a charging battery unattended
-
Specifications
Width - 180mm
Height - 215mm
-
Summary
- EA-023
- Lipo Safe Bag
-
-
Summary
ESK002 Titanium Turnbuckles
-
Summary
- ESK002
- Titanium Turnbuckles
-
-
Summary
EA-014 Main Blade Holder
-
Summary
- EA-014
- Main Blade Holder
-
-
Summary
EA-015-09T Motor Pinion 9T (2.3mm Hole)
-
Summary
- EA-015-09T
- Motor Pinion 9T
- 2.3mm Hole
-
-
Summary
EA-015-10T Motor Pinion 10T (2.3mm Hole)
-
Summary
- EA-015-10T
- Motor Pinion
- 10T
- 2.3mm Hole
-
-
Summary
EA-015-11T Motor Pinion 11T (2.3mm hole)
-
Summary
- EA-015-11T
- Motor Pinion
- 11T
- 2.3mm hole
-
-
Summary
EA-015-12T Motor Pinion 12T (2.3mm hole)
-
Summary
- EA-015-12T Motor Pinion 12T (2.3mm hole)
-
-
Summary
EA-015-13T Motor Pinion 13T (2.3mm hole)
-
Summary
- EA-015-13T
- Motor Pinion 13T
- 2.3mm hole
-
-
Summary
Xtreme 180 SE Bearing motor A and B
-
Specifications
Model: ESL031
Shipping Weight: 40 grams
Manufactured by: Xtreme Production
-
Summary
- ESL031/32
- Xtreme 180 SE
- Bearing motor
- A + B
- Double Pack
-
-
Summary
ESK013 Hardened Feathering Shaft x 4
-
Summary
- ESK013
- Hardened Feathering Shaft
- 4 pieces
- HB King 2
- Belt CP
-
-
Summary
ESL034 Aluminium Swashplate
-
Summary
- ESL034
- Aluminium Swashplate
-
-
Summary
EHB003 Composite Blade Grip
-
Summary
- EHB003
- Composite Blade Grip
-
-
Summary
EHB004-08 Wooden blade 225mm - 08 degree pitch
-
Summary
- EHB004-08
- Wooden blade
- 225mm
- 08 deg pitch.
-
-
Summary
Shopping Cart
You have 0 items
Your total is £0.00
- Subtotal:
- £0.00
- VAT Cost:
- £0.00
Change currency to:
Send To A Friend
Print This Page