Trex 450 Electric RC Helicopters
SummaryThe Trex 450 - various models available with wide range of electronics. We can custom build your Trex 450 or put together some of the best packages available for you to build.
Main features indicated on the front of the SE manual.
32 precision bearings.
Rear tail servo mount.
Collective pitch system.
Tail rotor drive belt system.
Main drive gear with cooling fan
Professional servo control lever design.
85% pre assembled.
Please note we also only carry the V2 model this has the new and improved gear system i.e. the blue gears. The advantages of this are as follows...
* New gear ratio(4.24/1), suitable for the motor with higher KV, to ensure a safer operation.
*The drive pulley and tail drive pulley are made of aluminium, this increases the rigidity and wear resistance which in turn improves efficiency and reduces energy loss.
* The kit uses stainless steel ball linkage so it wears less and prevents the development of rust.
*Tail rotor hub made of stainless steel making it resistant to impacts.
The specifications of the helicopter retrieved from the Align SE manual are as follows....
Autorotation Tail Drive Gear:106T
Tail Drive Gear:25T
Drive Gear Ratio: 1:11.5:4.24/1:13.6:4.24
Weight(without power system):365g
Weight(including power system):690g
Brushless motor: RCM-BL430L 3550KV
The recommended power equipment from the ALIGN manual is as follows...
Li-Poly battery: DC11.1V (1300 mAh or more)
Transmitter: 6 channel or more (including helicopter system)
Receiver : 6 channel or more
Servo: 4*9g OR 3*9g + 1*6g
I would recommend different equipment to this partcularily in the area of lithium batteries -1300 mAh is not adequate. The difference in price and quality with this range of different options is vast. You can go for budget, medium or expensive.
Trex 450 - Ready To Fly (RTF)
Trex 450 - Kit
You have 0 items
Your total is £0.00
- VAT Cost:
€ 39.98 - $ 54.98