Well, it all seems to work...........
Observations are
1. Tx is very sensitive, not like my E-sky jobs. I was finding i was giving far too much input and the heli was wizzing off.
2. It needs fine-tuning to get a good hover.
3. The main gear feels notchy against the motor; how tight afit should it be ? For example it is tighter than on my Honeybee FP.I would say the mesh was on the tight size.
4. Had to bend the battery compartment to get a tighter fit, the battery came out at one stage.
5.If you just fractionally join the lead from the Rx to the battery, connecting it when you turn the Tx on is easy.I put the battery in the heli once connected, i found this easier
So,need to re-calibrate my fingers to give smaller inputs and i'm sure this will be some heli
Hippo17
_________________
Honeybee FP,slo-max 300,M24's, DD tail, superskids and 1200 lipo(at girlfriends)
Honeybee FP Stock bar superskids and 1200 lipo (at mine)
Walkera 4 3 B
Silverlit planes x 4
King 2, brushless, soon to go
