Hiya all!!
I need some help please. I've searched high and low for this but can't find it.
I had a light crash with my HBK2. It damaged the plastic push link that changes the pitch of the blades and also a servo (the one on the left, in front of the gyro, if you were looking at the gyro, tail facing you). Got some spares and fixed it, but now my blades are totally out. The one blade is ok, but the other one is negative. Also, I'm not sure if I've connected the linkages to the right connections. There is 2 places to connect the linkages on the swash plate for both the servos.
Is there any help with pics to set this up please?? PLEASE Help me!!
THX,
Joey
_________________
"Success is not final, failure is not fatal. It's the courage to continue that counts."
Walkera Dragonfly 4#1
ESKY Honey Bee King II
3900kv Motor + 10t Pinion Gear
25A ESC
2200mAh Super Hero Lipo
Art-tech EG202 Gyro
After repair, no lift...PLS HELP!!!
| Author | Message | ||||
|---|---|---|---|---|---|
|
djjoey80 Junior Pilot   Age: 28 Joined: 04 Feb 2008 Posts: 61 Country of choice:  |
|
||||
| Profile Private Message | |||||
| Board Alert | Board Message |
|---|---|
|
There are 6 posts in this topic to view if you are logged in.Why Register?
|
Similar Topics
| Topic | Last Poster | Forum | Replies | Posted |
|---|---|---|---|---|
| Just finished 1st repair on my origin... | Starbuckin | Lama | 3 | Wed Aug 27, 2008 9:42 pm  |
| Zero Lift - Need Help | Dufniall | Trex 450 XL and SE. Electronics, radios, set up, resources and discussion. | 12 | Thu Aug 21, 2008 1:42 pm |
| No lift and spins anti clockwise | japatti | Lama | 5 | Mon Aug 18, 2008 7:12 pm |
| CP2 lift off problem!! | alioth | ESKY HoneyBee CP2 (Collective Pitch) | 8 | Sun Aug 17, 2008 8:01 pm |
| NO Lift... | rconfused | Belt CP | 6 | Sat Aug 16, 2008 7:02 pm |
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
