I have bought the Xmhobbies cheap G401B gyro and also bought the new Tower Pro MG90 Servo. These are metal gear servos and supposed to be digital but when I set the gyro to digital servo mode all I get is a buzzing from the servo and the MG90 gets realy hot (even with no servo arm connected). I have set the delay to 0 as instructed by the manual. It works fine in analogue mode with the standard esky servo and the gyro works great. I'm guessing the MG90 is either not a digital servo or it's faulty. Any ideas?
Thanks.
_________________
Belp CP (Plastic)
SG90's
Align 315 Blades
Hobbywing UBEC
MX 400 Main Gear
DX6i
AR6200
DragonSky 450 (Trex V2 clone)
Twister Medevac
Lama V3
Buzzing Tower Pro MG90 (Digital?) Servo and G401B Gyro
| Author | Message | ||||
|---|---|---|---|---|---|
|
john_pullen Senior Pilot   Age: 41 Joined: 03 Sep 2007 Posts: 90 Country of choice:  Location: Orpington, Kent (UK) |
|
||||
| Profile Private Message | |||||
| Board Alert | Board Message |
|---|---|
|
There are 7 posts in this topic to view if you are logged in.Why Register?
|
Similar Topics
| Topic | Last Poster | Forum | Replies | Posted |
|---|---|---|---|---|
| MSR - Servo hunting | WattTheHeli | Blade Helicopters | 4 | Fri Nov 20, 2009 8:13 pm  |
| Tail Wagging after input with G401B &... | 8800GT | Trex 450 XL and SE. Electronics, radios, set up, resources and discussion. | 6 | Fri Nov 20, 2009 8:36 am |
| Gyro help | hind sight | Belt CP | 2 | Thu Nov 19, 2009 5:31 pm |
| Which servo to use? | clvalentini | Servo's | 0 | Wed Nov 18, 2009 9:53 pm |
| servo on channel 6 glitching really b... | martynm | Belt CP | 9 | Tue Nov 17, 2009 5:30 pm |
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
