was hovering and seems to be nice and steady as usual, wind speed feels low like every other day when I flip the bird over and back, flip it over, inverted flight, just as I roll the bird back to normal, caught the sudden push of the wind while rotor head pointing to the left, it got push downward at some degree, hit the ground side way
2 servos broken the gear, main shaft bend, flybar bend, 1 blade snapped, landing gear snapped, feathering shaft bend,
parts I'm going to replace with and get a set of tool as well since all my alloy keys are not so six sided any more.
HS1158-01 325 Pro rotor blade white €9.99 1 €9.99
Hitec HS65MG x 4 €74.46 1 €74.46
Gorilla Landing Gear - REG - BLACK €12.44 1 €12.44
HS1251T 450SEV2 Feathering Shaft €4.53 1 €4.53
HS1217 High Carbon Steel Main Shaft €8.50 1 €8.50
HS1158-00 325 PRO Rotor Blade/Black €9.56 1 €9.56
HS1006 Flybar rod 2pcs €3.17 1 €3.17
HZ040 New Driver Set (1.5mm x 2, 2.5mm) (4pcs) €12.75 1 €12.75
Total: €167.85
I think thats about it in the list, gonna get a set of trueblood damper while I'm at it, looks like I wont have a helicopter to fly for a couple of months, hopefully I have it repair before the summer is gone
its amazing how much damage happened in such a short time, like a flash of a second
_________________
TREX 450SE V2,430XL 12T, Align ESC, 3x HS65MG's, Flagged Tail Pulley, GY401 Gyro, 9257 Tail Servo, Gorilla Landing Gear, Futaba T7C 2.4GHz, IMax B6, 2 x SHARK 2200mah 25C
HBK2 retired
