GUIDE on Transmitter (0406A) that ships with BeltCP RTF

Post new topic Post reply

Author Message
flossie
Senior Moderator




Age: 37
Joined: 11 Sep 2006
Posts: 3899
Country of choice:
Location: Kings Lynn,Norfolk, UK

Post Posted: Fri Nov 16, 2007 10:45 pm
Post subject: GUIDE on Transmitter (0406A) that ships with BeltCP RTF
Quote 
HI,

Here is a Little Explantation of what all the Dials and Knobs do on the Transmitter (eSky Model: 0406A) that ships with the Esky Belt CP RTF.

Each number on the Picture in each section Corresponds to the descriptions below for each section.

Here is the Back of the Transmitter:



1, Battery Cover to Put Batterys Into
2, Trainer socket to connect to a another transmitter or a Flight Simulator
3, Aerial that extends to approx 1 meter
4, Handle to hold Transmitter while carrying Helicopter.

Here is the TOP of the Transmitter:


1, A Trainer Switch. So 2 people can control 1 helicopter like a novice and a Pro.. Pro takes off helicopter and holds switch to let Novice fly it. If Novice gets into trouble Pro releases switch to retake control and thus averting a crash hopefully.
2, Pitch Trim knob to increase or Decrease Pitch of Main Rotors
3, IDLE UP Switch so Motor Don`t go below certain RPM. Used for 3D Flying
4, Idle up throttle curve PITCH knob to increase your throttle Pitch range. Turn left to DECREASE throttle motor RPM curve and Turn right to INCREASE throttle rotor rpm curve.
5, Aerial
6, Handle

Here is the LEFT Hand side of the Transmitter:



1, Transmitter LED voltage Indicator
2, Gyro switch to Turn the Giro OFF or ON
3, Push UP to increase Rotor Speed and Positive Pitch, Push DOWN to decrease Rotor Speed and negative Pitch. Push LEFT to turn helicopter Left and Push RIGHT to turn helicopter right
4, To alter MAIN MOTOR Throttle Speed
5, To TRIM the Elevator.
6, Power ON OFF switch
7, to INCREASE or DECREASE tail rotor blade Pitch which is Commonly used to stop tail spinning wildly out of control.

Here is the RIGHT Hand side of the Transmitter:



1, Elevator & Aileron Stick. Push it Up to make the Elevator tilt forward and Down. Pull it back to make the Elevator tilt backward and Down. Move it Left to make the Aileron tilt left (move Left, Sideways flight) and right to tilt right (move Right, Sideways flight).
2, Elevator trim level. To alter the pitch of the paddles, Forward to go forward, Back to go back
3, To Connect a strap so it goes around your neck, so you can`t drop the Transmitter
4, Power Switch
5, Aileron trim level. Move it left to make Helicopter pitch left and Right to pitch right.
6, To control direction of Servo`s connected to Reciever. Normal or reverse



Hope this explains everything as it`s what i can understand and in a sort of easy non technical way for new King owners to understand.

Please Sticky this if it`s all correct earlgrey.

EARLGREY EDIT

All present and correct Paul - thanks a lot Smile


Altered the following section to update it:

4, Idle up throttle curve PITCH knob to increase your throttle Pitch range. Turn left to DECREASE throttle motor RPM curve and Turn right to INCREASE throttle rotor rpm curve.

Cheers.
_________________
Thanks, Paul

Futaba FF7 2.4Ghz
Trex 600NSP R617FS, OS50H, S9254 & Gy401, 3x 5625MG + 625MG
Boomerang 40, Pilatus PC-9, Green Sleeve Glider BMFA "A" CERT PASSED
Imax B5, Cellpro 4S
Back to top Profile Private Message
Thankful People
1 user(s) is/are thankful for this post.
Display posts from previous:  
Board Alert Board Message
There are 34 posts in this topic to view if you are logged in.

Why Register?

  • Your details are kept secure and private.
  • Heliguy.com will not share your details
  • You can unsubscribe at any time
PM Earlgrey for any forum queries.

Login here and be redirected to this Topic Register

Similar Topics

Topic Last Poster Forum Replies Posted
What transmitter to buy? nickers Radio Transmitters. 9 Thu Nov 19, 2009 4:13 pm View latest post
honey bee king 2 transmitter help leonmike HoneyBee King (Collective Pitch) 5 Sat Nov 14, 2009 8:30 pm View latest post
Beltcp gyro hind sight Belt CP 1 Thu Nov 12, 2009 8:51 pm View latest post
esky 6 channel transmitter fms cable drhelmer FMS Free Flight Simulator 1 Mon Nov 09, 2009 9:13 pm View latest post
cp2 set up guide in pictures kelpy ESKY HoneyBee CP2 (Collective Pitch) 1 Sat Nov 07, 2009 11:16 pm View latest post
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

heliguy illustration

Spektrum DX6i

Multibuy Belt CP Blades

Logictech 2100T

Futaba GY401 Gyro

Belt CP

Belt CP Carbon RTF

RC Helicopter Tools

RC Heli Tools