I wonder if anyone can explain this...............About a month ago I replaced the front (elev) servo on the King 2 after an altricaton with a flower pot
It was a straight swap, stock servo for stock servo. Everything went fine, centred the servo then attached the servo horn horizontally and adjusted the rod length to suit, been flying it since without any issues. (Or crashes, longest clear patch yet 
)
Today, after a perfectly normal flight I had the heli on the table in front of me throttle off, and for no real reason I just moved the right TX stick in a full circle as if I was checking for normal operation before a flight and I noticed that the servo changed its centred position, I disconnected the rod from the swash and repeated the stick circles a few times and the servo seems to now have changed it's centred position 90 degrees and the horn is pointing straight down. Other than that it's now behaving normally.
Shall I move the horn and carry on or is the servo on it's way out?
Cheers,
Alan.
_________________
HB King2 that seems to think it's a hovercraft!! But is starting to realise it can fly.............
EXI 450 - I seem to enjoy building/repairing as much as flying so gonna see what I can put together.
