Heliguy Forum - RC heli forum

Hi.. I mention my last post eye view first.. The pitch was not suitable for lift off so got the idea that the swashplate placing middle around the shaft. I adjust swahplate low by the decreasing servo links to down, a small space in between swash and bearing. I check the servos by rotating spinning stick of transmitter its work fine and not congested or touching to bearing to move left right, forward and backward. My first question is, is it correct or incorrect
Now I increasing pitch links to lengthen high, here is the another problem that the blades are moving same place but the tip to end looks like diagonally not flat. May be I am not explain the right way but when the pitch links decreasing the blades are horizontal and flat. according to my mind the blades looks flat, may be I am wrong but every video shows me that the blades are flat not looking diagonally, is that wrong So need your ideas and kindly advices.