Search found 524 matches
| Author | Message |
|---|---|
| Topic: I'm not familiar with that heli. | |
| inky38 Replies: 28 Views: 271 |
|
| I as away on a training course once and there was a model shop nearby, so I took the opportunity to call in.
The shop was empty and so the shop keeper came over to talk to me. He inquired about wh ... |
|
| Topic: How locked is your tail ? | |
| inky38 Replies: 14 Views: 435 |
|
| Actually the original post, way back in April, was when I was running with the original Esky HH and the stock tail.
I then got a GY401 (which is now on my T500), followed by the Logitech. I've ... |
|
| Topic: Does the cold affect these wee birds as much as their pilots | |
| inky38 Replies: 32 Views: 323 |
|
| Well I went out today in the back yard to do some gentle flying because it seems like ages since I've flown. Also the fog prevented me from flying any more than 30 feet away.
I deliberately left t ... |
|
| Topic: Ho Ho Ho - V2 | |
| inky38 Replies: 10 Views: 141 |
|
| Well I reckon that the deep sounding Ho Ho Ho will never be heard again. |
|
| Topic: Ho Ho Ho! | |
| inky38 Replies: 50 Views: 643 |
|
| Yikes
Santa got inverted. Does that mean the thread should be renamed to OH OH OH I'd blame the reindeer. They obviously got into an argument. |
|
| Topic: Kingzilla Coax | |
| inky38 Replies: 54 Views: 647 |
|
| I guess it uses a similar principle to those employed on wheels of cars
In Formula 1 most cars have areo devices attached to the outside of there front wheels that do not turn around. I guess ... |
|
| Topic: Paypal is good - giving out CC# bad | |
| inky38 Replies: 9 Views: 168 |
|
| I recently had a 'fraud detection' alert from my credit card, and I too had an email from a particular stockist of RC products alerting me about it.
My CC company picked up on a 63p transaction to ... |
|
| Topic: Creeping Tail Servo | |
| inky38 Replies: 6 Views: 185 |
|
| This is something that typically can be stopped by adding a bit of trim or sub trim.
Give it full left rudder and slowly release. If the servo continues to creep forward give it some left trim. ... |
|
| Topic: Kingzilla Coax | |
| inky38 Replies: 54 Views: 647 |
|
| It's been a week richard. What's the latest with the Kingzilla.
Has it morphed into a Chinook yet? |
|
| Topic: HS-82MG servos and Trex 500 | |
| inky38 Replies: 14 Views: 284 |
|
|
Only gripe i have with them is the top bearing in the servo head is 'sloppy' on mine and all were brand new. When they break i will upgrade to the larger ones (i cant remember which ones). Mi ... |
|
| Topic: New custom canopy from Acehelis!!! One for the Rossi fans :) | |
| inky38 Replies: 18 Views: 265 |
|
| I see the Fiat and 46 and I automatically think of Yamaha and Rossi.
I wonder how many other MotoGP fans see the Fiat sign and think of Yamaha ? I think Fiat are inadvertantly advertising for a d ... |
|
| Topic: HELP !!! Heli Flying Itself | |
| inky38 Replies: 12 Views: 322 |
|
| Once you'd got the heli set up, did you re-bind the tx/rx to confirm the low throttle setting?
No I only bound the Tx / Rx once, plugged in all wires into the Rx and then bound it to the Tx, I then ... |
|
| Topic: HELP !!! Heli Flying Itself | |
| inky38 Replies: 12 Views: 322 |
|
| Once you'd got the heli set up, did you re-bind the tx/rx to confirm the low throttle setting? | |
| Topic: Which Lubricant? | |
| inky38 Replies: 16 Views: 207 |
|
| hi, i would'nt use wd40 on any part of my heli, i use a silicon spray for my belt and spray gease on the rest- ie main shaft and bearings, bees wax is apparently good for the main gear and pinion... ... | |
| Topic: honeyB BATERY OVER HEATING | |
| inky38 Replies: 5 Views: 114 |
|
| Before my brushed motor and esc went up in flames, by jst plug started to melt.
Basically they cannot deal with alot of current. I recommend you change them to deans or bullets |
|
| Topic: king 2 bought a new battery and now it wont beep or spin | |
| inky38 Replies: 10 Views: 232 |
|
| This might sound daft, but is you motor connected properly.
When it's disconnected, the esc wont beep. (Esky one anyway) |
|
| Topic: Which Lubricant? | |
| inky38 Replies: 16 Views: 207 |
|
| WD40 is not a long term lubricant. It is a penetrating oil that is designed to evaporate off and leave a semi water repellant layer behind. Actually a military development and stands for Water Dispers ... | |
| Topic: Esky 3800 motor interferance | |
| inky38 Replies: 7 Views: 180 |
|
| The esky 3800 brushless, actually has a larger body than the 3900 and therefore requires a slight frame mod to allow the correct fitting.
I've never had a 3800 so can't comment on the specific det ... |
|
| Topic: The next modification for the king | |
| inky38 Replies: 7 Views: 260 |
|
| Check this out
[url=http://news.bbc.co.uk/1/hi/sci/tech/7723703.stm]http://news.bbc.co.uk/1/hi/sci/tech/7723703.stm Chase When Santa has done his deliveries, you'll have to try one of these o ... |
|
| Topic: Ho Ho Ho! | |
| inky38 Replies: 50 Views: 643 |
|
| Well getting the CoG right shouldn't be a problem add/remove reindeer/presents Can you get a speaker on there playing ' Ho Ho Ho Merry Christmas' Let's hope it flys as well as ... |
|
| Topic: Is it a record | |
| inky38 Replies: 18 Views: 281 |
|
| G'day
It has finally happened. Is 5 months too much life to expect from a stock brushed SUPER motor? Everything has finally clicked, hovering nicely |
|
| Topic: Kingzilla Coax | |
| inky38 Replies: 54 Views: 647 |
|
| I think what's happening is a case of harmonics. If you get both sets of blades with a tad imbalance, (and Chase admitted to not doing that yet) I think you are going to get instances when both the up ... | |
| Topic: Is my Mystery B6 stuffed. | |
| inky38 Replies: 5 Views: 140 |
|
| I just receive my mystery B6 charger a few days ago, but it does not charge my batteries. I have followed the manual carefully and every thing is fine untill I press the start button for 3 sec,s to ge ... | |
| Topic: Kingzilla Coax | |
| inky38 Replies: 54 Views: 647 |
|
| Does the standard disk loading formula still apply to a Coax ? | |
| Topic: Kingzilla Coax | |
| inky38 Replies: 54 Views: 647 |
|
| My guess is that the yardsticks are just not rigid enough.
The length of the yardstick and the frequency of the flexing seem to be causing the problem. Have you got any aluminium angle or box se ... |
|
