Search found 64 matches
| Author | Message |
|---|---|
| Topic: SNOWING? | |
| rowdy Replies: 13 Views: 109 |
|
| Hi,
I live in central NSW in Australia on some high ranges and it was snowing yesterday morning, I know it is miles away from you but this is bizarre weather particularly because summer is only 1 w ... |
|
| Topic: Hughes 500 fuselage and Trex 450 | |
| rowdy Replies: 77 Views: 1369 |
|
| yeah, I just used a cable tie near the back mounts also, and screwed in the front ones, works a treat. Also did not have the height problem with the boom and both mounts are the same height. Are the f ... | |
| Topic: something i noticed about the titan forum | |
| rowdy Replies: 17 Views: 263 |
|
| Yeah, those 4#3b's are wild little things! | |
| Topic: Hughes 500 fuselage and Trex 450 | |
| rowdy Replies: 77 Views: 1369 |
|
| I think that is your best option, no need to chop the chopper. | |
| Topic: Cobra fuselage tail heavy | |
| rowdy Replies: 5 Views: 199 |
|
| Probably, you will need to check the specs that came with your electronics
If you know how much weight you need to balance your bird you will be able to compare the weight difference with your curr ... |
|
| Topic: Cobra fuselage tail heavy | |
| rowdy Replies: 5 Views: 199 |
|
| Hi there,
check out thid post. I will give you more ideas as you will see. It seems some scale kit conversions have this sort of problem. Just a thought. http://www.heliguy.com/Forum/hughes-500-fuse ... |
|
| Topic: Hughes 500 fuselage and Trex 450 | |
| rowdy Replies: 77 Views: 1369 |
|
| I'm hearing you Sats, too many unknowns and potential loss of limbs/heli. Will most likely go with your option. I have been flying with a 60 gram weight in the nose in the mean time with the battery w ... | |
| Topic: PHOENIX v 2.0 (beta) Released. Post your findings here | |
| rowdy Replies: 180 Views: 3068 |
|
| 2.00j beta up for grabs................go you good thing! | |
| Topic: I think my ESC is faulty OR my DX6i setup is wrong | |
| rowdy Replies: 24 Views: 242 |
|
| Could your pinnion be slipping? | |
| Topic: Hughes 500 fuselage and Trex 450 | |
| rowdy Replies: 77 Views: 1369 |
|
| point taken, don't want to risk that!! I may have to adopt the sensible approach & go with the 11.1v 3300mah battery. One day, when I get to the not give a s@!t attitude with my beloved heli...... ... | |
| Topic: I think my ESC is faulty OR my DX6i setup is wrong | |
| rowdy Replies: 24 Views: 242 |
|
| Just a thought, when the power bursts like that, isn't that what happens when your battery is getting low? I am sure the esc provides a low power burst scenario when the battery is low to give you tim ... | |
| Topic: Hughes 500 fuselage and Trex 450 | |
| rowdy Replies: 77 Views: 1369 |
|
| If I left the pinion the same & went for a greater head speed, I wonder what the max headspeed capability of the T-rex head is untill it destroys itself. Balanced head would obviously be an issue ... | |
| Topic: I think my ESC is faulty OR my DX6i setup is wrong | |
| rowdy Replies: 24 Views: 242 |
|
| I think if your curves are the same & you are reading the correct readings for pitch, assuming you are reading the pitch with the dx6i and not just transferring settings with fingers crossed that ... | |
| Topic: Hughes 500 fuselage and Trex 450 | |
| rowdy Replies: 77 Views: 1369 |
|
| ok so
14.8v x 1.8A = 26.64Watts 11.1v x 3.3A = 36.63Watts to keep power the same as the 11.1v 3300mah battery I would need :- 36.63W/14.8v = 2.475A therefore a 2500mah battery @ 14.8v Would this ... |
|
| Topic: Hughes 500 fuselage and Trex 450 | |
| rowdy Replies: 77 Views: 1369 |
|
| Hello again,
I was just wondering if anyone has tried a 4s(14.8v 1800mah outrage battery) with the align 450 electronics (sc=BL-35X and motor= RCM-BL430X). The electronics specs show the electrics sh ... |
|
| Topic: PHOENIX v 2.0 (beta) Released. Post your findings here | |
| rowdy Replies: 180 Views: 3068 |
|
| 2.00i beta is ready | |
| Topic: Hughes 500 fuselage and Trex 450 | |
| rowdy Replies: 77 Views: 1369 |
|
| http://www.heliguy.com/Forum/images/userpix/8732_hughes_007_1.jpg
Well, finally built. Thanks Sats for the advice....worked well. I had no problems fitting my trex 450S into the fuze after moving the ... |
|
| Topic: Hughes 500 fuselage and Trex 450 | |
| rowdy Replies: 77 Views: 1369 |
|
| Nice,
Should save me a few millimetres, will give it a go. Cheers |
|
| Topic: Alternate tail blades?? | |
| rowdy Replies: 10 Views: 180 |
|
| yep, got the K&B's & they fly well......no probs at all. Thanks gents for your input.
Oh, & by the way, I went for the green ones. |
|
| Topic: Hughes 500 fuselage and Trex 450 | |
| rowdy Replies: 77 Views: 1369 |
|
| Inspired by the look of these fuselages, I went out & bought the align version & am putting it together as we speak. When I attach the timber risers supplied (and pre assembled) I find that th ... | |
| Topic: Alternate tail blades?? | |
| rowdy Replies: 10 Views: 180 |
|
| K&B eh? I've seen some locally but they didn't look big enough....if you reckon they are good I might try some of those.
Thanks |
|
| Topic: Alternate tail blades?? | |
| rowdy Replies: 10 Views: 180 |
|
| cheers.......might try the walkeras till originals are available | |
| Topic: Alternate tail blades?? | |
| rowdy Replies: 10 Views: 180 |
|
| Hello again,
I can't get hold of any genuine TT mini titan tail blades & was wondering if anyone could suggest a good alternative. Thanks |
|
| Topic: How do you upgrade a 450XL to 450SE? | |
| rowdy Replies: 7 Views: 176 |
|
| Hi there,
I would just buy a SEV2 kit and keep the XL as a spare if I was in your shoes. It's always good to have a second heli, so when you crash you are not disabled untill parts show up, also you ... |
|
| Topic: Simple harness for a battery | |
| rowdy Replies: 16 Views: 291 |
|
| Nice idea Starik, if it works well for you & it helps others you have done well, if no one shared their ideas then this forum would not be useful, I have a similar velcro setup as yours with the a ... | |
