Search found 1035 matches
| Author | Message |
|---|---|
| Topic: Left hand turns and tail fins? | |
| scooter Replies: 6 Views: 62 |
|
| I have found the same, but even on larger helis it is like this.
Just use some more forward speed and practice. |
|
| Topic: SATSUMAS TREX 600 MD500E BUILD THREAD | |
| scooter Replies: 31 Views: 402 |
|
| The MD with 5 blade head look beautiful, if i ever build a scale, thats what it will have.
It pretty cheap as well, the only tricky bit is getting the 5 rotors balanced as most blade sets can vary ... |
|
| Topic: Logo 500/600 E-raptor E550/E620SE | |
| scooter Replies: 12 Views: 189 |
|
| Here is my latest heli, a Logo 700, swinging 690MM and 105MM rotors with scorpion 630KV motor, 2150RPM and 10S 4350MAH 25C lipos, 4 min flight time and final weight RTF with lipo 3770Grams.
http://ww ... |
|
| Topic: Walkera 4#3Q | |
| scooter Replies: 17 Views: 455 |
|
| did anyone sees the prices at the walkera shop? Ripoff | |
| Topic: 4#3g vid | |
| scooter Replies: 38 Views: 488 |
|
| looks cool! | |
| Topic: Problems | |
| scooter Replies: 4 Views: 89 |
|
| the high pitch noise and also the motor dramas point towards failing motor IMHO | |
| Topic: Walkera 4#3Q | |
| scooter Replies: 17 Views: 455 |
|
| its on the walkera site now! Final weight is 51g, only 3g more than the 4#3B. | |
| Topic: Logo 500/600 E-raptor E550/E620SE | |
| scooter Replies: 12 Views: 189 |
|
| Logo 500 for sure, both with same equipment fully loaded with 6S 5000MAH lipo the logo is over .5KG lighter!
However if you crash it would be more expensive for parts, not too bad but more than the ... |
|
| Topic: Can the 4#3B do a loop? | |
| scooter Replies: 26 Views: 402 |
|
| You can do a loop or gentle roll without neg pitch and also in norm flight mode on CP setup.
The problem with FP is that to get the effects of 0 pitch you must slow the rotor RPM which makes FP very ... |
|
| Topic: Lipo tester - help needed | |
| scooter Replies: 2 Views: 68 |
|
| A normal multi meter will tell you the voltage. The 1-6 cell testers are usually used to determine how far out of balance the cells are. | |
| Topic: 4#3 upgraded to 2.4GHz | |
| scooter Replies: 13 Views: 151 |
|
| How do you bind the 2.4G receiver? Also yes you always need to setup the heli again when you get a new radio. Have a play with the extent pot (its a dual rate for the 2 servos) to get the response h ... | |
| Topic: 4#3 Killer? | |
| scooter Replies: 4 Views: 124 |
|
| I think it was advertised as CP, but its got FR rotors. It does not look nice and costs more than the walkera. | |
| Topic: Can the 4#3B do a loop? | |
| scooter Replies: 26 Views: 402 |
|
| It can be done, there is a guy on runryder that has done it a few times (so he says). I will try it when the weather is right. But first you might want to check that the extent pot is giving you lot ... | |
| Topic: WALKERA 1#B 2.4GHz Helicopter | |
| scooter Replies: 7 Views: 230 |
|
| If you get one get the 1#A, its much better. Although my friend and i had the 1#A it is very very light.
Mini Titan is far better as anything else you will sell once you progress. Just ask me, i ha ... |
|
| Topic: I cant find a motor for the 52 | |
| scooter Replies: 2 Views: 57 |
|
| ebay or lots of online stores have the stock motor | |
| Topic: Second Titan issues | |
| scooter Replies: 11 Views: 175 |
|
| I don't think its the servos making much difference, do you have white paddles on one and green on the other? Also check the swash values for the cyclic are the same | |
| Topic: 4#3g vid | |
| scooter Replies: 38 Views: 488 |
|
| cool vid, looks very very tricky to keep it in one spot inverted. | |
| Topic: Video. Being reckless with a 4#3B. | |
| scooter Replies: 9 Views: 187 |
|
| Hmmm now i'm thinking, what if i remove the rotors and flip them around, take off inverted and then land on the roof! He he he, i think i'll try it, i can do inverted it may be fun.
When i'm bored i ... |
|
| Topic: Governor mode | |
| scooter Replies: 10 Views: 91 |
|
| I found that the first year i never used a gov mode, but then as i progressed into tricks i found it was needed to keep the constant RPM and helps with timing your move and not bogging up the motor. ... | |
| Topic: Video. Being reckless with a 4#3B. | |
| scooter Replies: 9 Views: 187 |
|
| i found something very fun last night, fly it so the head button hits the roof and keep it there, when you try to bring it down it doesn't want to come (like its stuck there), you have to almost stop ... | |
| Topic: 4#3g vid | |
| scooter Replies: 38 Views: 488 |
|
| Well after reading through lots of pages on rcgroups, i believe it should be out before christmas (famous words eh?).
I need one LOL |
|
| Topic: Governor mode | |
| scooter Replies: 10 Views: 91 |
|
| Tail pulsing with gov mode on is an indication off poor ESC gov mode, the RPM is gently fluctuating, common on the align and cheap ESC's.
Jazz ESC (Kontronic) are regarded as the best due to there ... |
|
| Topic: Please forgive my ignorance! | |
| scooter Replies: 6 Views: 104 |
|
| Gyro should last pretty much forever unless you damage it physically
Servo on nitro due to vibe may only last 200 flights (hard to say, could last 1000 or more) Yes its a good investment, it can ... |
|
| Topic: Mikado Logo 500 and 600 3D | |
| scooter Replies: 36 Views: 206 |
|
| I found the raptor 90 boom too short for the 788XL belt (78.8" circumference belt) 1/4" width. The raptor boom is 814MM.
I got a maxi joker carbon boom ($100AU sheesh!) and cut it down to 840MM whic ... |
|
| Topic: Battery Voltages - on and off load | |
| scooter Replies: 12 Views: 156 |
|
| don't use the voltage alarm, all good quality lipos hold very consisten and high voltage the whole way through so by the time you alarm has come on you would have discharged more than 80% of the pack ... | |
