Throttle range help

Post new topic Post reply

Author

Message

8800GT
Group Leader

Joined: 10 Dec 2008
Posts: 3874
Country of choice:

Posted: Thu Nov 19, 2009 12:02 pm
Post subject: Throttle range help

Quote

Hi just got my 500 flying but its lifting off at 80% power and the throttle doesent start until like 35% on the stick so the throttle range is wrong. Iv read the hobbywing instructions and i just cant seem to get it to calibrate the range. Turn on the TX DX6I with throttle trim at midstick (tried full trim just beeps like mad at me) then put throttle at full postion then power up i get as far as the two beeps at full stick then it says to move the throttle stick down to lowest i do this and it is supost to beep for a while and then do a long beep to say its dont but i just dont get this long beeps. I have left it for 5 minutes and still dont get this long beep. And so i tried spooling up again but getting no power until 35% stick. is there something i need to do with the dx6i to let it do this ? i cant seem to be able to solve this. Has anyone done this with a Hobbywing pentium esc either on the 450 or 500 with spektrum radio ? How do you do it ?
_________________

Align Trex 450 Sport Super Combo
GP780 & DS520

CopterX 450 SE V2
Hitec HS65MG
GP750-DS520

Profile Private Message

Board Alert	Board Message
	There are 3 posts in this topic to view if you are logged in. Why Register? Your details are kept secure and private. Heliguy.com will not share your details You can unsubscribe at any time PM Earlgrey for any forum queries. Login here and be redirected to this Topic Register

Board Alert

Board Message

There are 3 posts in this topic to view if you are logged in.

Why Register?

Your details are kept secure and private.
Heliguy.com will not share your details
You can unsubscribe at any time

PM Earlgrey for any forum queries.

Similar Topics

Topic	Last Poster	Forum	Replies	Posted
Esky Tx EK2-0406A Fails Range Check	rogerxiii	Radio Transmitters.	0	Tue Mar 16, 2010 8:12 pm
Esky Tx EK2-0406A Fails Range Check	rogerxiii	I'm a stupid newbie, help me!	0	Tue Mar 16, 2010 7:51 pm
Arrghhh... Pitch range on Belt CP V2,...	Lancaster	Belt CP V2, mods, upgrades and older models.	5	Mon Mar 15, 2010 10:43 pm
falcon 3d range.	mintenj	Falcon 3D	0	Tue Mar 09, 2010 4:02 pm
Belt cp v2 throttle settings	hind sight	Belt CP V2, mods, upgrades and older models.	2	Tue Mar 09, 2010 9:46 am

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Heliguy Forum - RC heli forum