I have a question concerning installing a separate BEC with an ESC w/internal BEC with my DX6I.
I have soldered the power wire of the separate BEC onto the deans plug for the ESC and was wondering the best way to wire up the other end. Only have six channel receiver so no open channel to plug into. Would it be best to hook into the gear signal wire for the HH gyro or solder the wires with the wires from the esc to the receiver. Kinda confused on what I need to do on the receiver end for the BEC with no open channel.
Thanks,
Donnie
_________________
1st Belt CP, HXT 900 servos, Ti-turnbuckles RDTS MOD, Exceed 325 CF Blades
2nd CP-CF Telebee gyro, CopterX head/ taiL DX6I
CopterX450AE 450HDX-3550, Y-G401B HH, Volcano 40A esc, MKS-DS480 Tail , MG-14's cyclic
