The only problem i have is the pitch setup,I have a 3 point curve system on the TX but first let me tell you about the CCPM set up i have. The aileron and Elevator are set to +60 and the pitch is -60. This makes the elevator and aileron work correctly and up throttle stick gives me positive pitch. (Before it gave me negative due to defautls)
When i go to pitch curve setup, I have this : (approx)
PLN - 36%
P2N - 68%
PHN - 100%
the problem is that when at 36% (i think it should be -4 deg) but it is more. 100% doesn;t give me full pitch, it seems like the whole pitch range is lower than it should. For example... i set everything to 50% , the blades should be level right ? well it's about -4 out. How do i shift everything up ?
What about adjusting the CPPM pitch to higher than -60, maybe -85 to get the correct range. If it can't be done this way do i have to adjust the link rods ?
help please
