Hiya all!!
I need some help please. I've searched high and low for this but can't find it. I did check the "setting up blade pitch", but no luck.
I had a light crash with my HBK2. It damaged the plastic push link that changes the pitch of the blades and also a servo (the one on the left, in front of the gyro, if you were looking at the gyro, tail facing you). Got some spares and fixed it, but now my blades are just 0-pitch. All I did was remove the old servo, replaced it with the rudder servo and replaced the rudder servo with a new one. After the heli didn't wanna lift I messed around with the linkages to get the pitch right. At first it just wanted to go backwards right, fiddled a bit with the linkages and got it straight. The swashplate is straight now, and the main blades are running smoothly, I just can't get proper lift. I have to turn the pitch knob on the TX all the way to the right to get some picth. Do I need to turn the linkages out or in a bit or......What do I need to do to get the blades + pitch?
Is there any help with pics to set this up please?? PLEASE Help me!!
THX,
Joey
_________________
"Success is not final, failure is not fatal. It's the courage to continue that counts."
Walkera Dragonfly 4#1
ESKY Honey Bee King II
3900kv Motor + 10t Pinion Gear
25A ESC
2200mAh Super Hero Lipo
Art-tech EG202 Gyro
No Lift - please help me.
| Author | Message | ||||
|---|---|---|---|---|---|
|
djjoey80 Junior Pilot   Age: 28 Joined: 04 Feb 2008 Posts: 61 Country of choice:  |
|
||||
| Profile Private Message | |||||
| Thankful People | |||||
| 1 user(s) is/are thankful for this post. | |||||
| Board Alert | Board Message |
|---|---|
|
There are 17 posts in this topic to view if you are logged in.Why Register?
|
Similar Topics
| Topic | Last Poster | Forum | Replies | Posted |
|---|---|---|---|---|
| HBFP First Fly Wont Lift Off!!!! | Dusty1000 | HoneyBee (Fixed Pitch) | 9 | Tue Nov 11, 2008 11:53 am  |
| flips over on lift off | ringding | HoneyBee King (Collective Pitch) | 16 | Tue Nov 11, 2008 11:47 am |
| HELP! Heli won't lift | wakeboarder15 | ESKY HoneyBee CP2 (Collective Pitch) | 3 | Mon Nov 03, 2008 6:56 pm |
| Walkera 35 with belt drive and metal ... | hangingtough | Walkera 35 | 0 | Wed Oct 29, 2008 4:33 pm |
| Guru-z too heavy? Heli won't lift (mu... | Dusty1000 | HoneyBee (Fixed Pitch) | 4 | Tue Oct 28, 2008 12:15 pm |
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
