Heliguy Forum - RC heli forum

Join Date: Aug 2008
Posts: 12
Thanked 0 Times in 0 Posts
iTrader: (0)
Friends: (0)

Default Help.. cp2 driving me nuts
My almost new cp2 still isn't working I have it all trimmed out and did the unsticky mod. It fley for a few mintues and flew very well then turned left and chased its tail and broke the blades. I put on my HB FP blades... hovered perfectly for a little bit then took a left turn.

I changed out the tail motor and it still did the same thing.. flew for about 25 seconds then off to the left. the boom seems fine.. thought it was chewed up like my honeybee.

I tried 4in1 and even at all the way right.. still does it. It either flies well or goes left. I disconnected teh main motor and tried setting on the proportional. Seemed to be taking the settings and the more clockwise the more tail speed.

I am about to check myself into a mental ward. I am thinking either I have a second bad tail motor or the 4 in 1 is bad. The 4 in 1 does cycle thru the red light to solid green just fine.

Batteries are about new and fully charged.. forgot what the voltage is, but thinking it was above 12 volts, or high 11v.

any suggestions will be GREATLY appreciated. Wish they had a heli lemon law.