The ACER-LAB 40A ESC features the following functions:
Balance Discharge Monitoring and Protection (BDMP) Design for lithium battery pack. This innovative new system provides real time monitoring of the discharge voltage of each cell in your lithium (Li-ion/Li-poly) battery packs. Since each cell is monitored and protected by the ESC, you can expect an even longer life from your battery packs.
Compatible with both Lithium and Nickel battery types. (Lithium-Ion / Lithium-Polymer or Nickel Metal Hydride / Nickel Cadmium)
Extremely low output resistance and super current endurance.
Multiple protection features: Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
3 start modes: Normal / Soft / Super-Soft, compatible with both fixed-wing aircraft and helicopters.
Throttle range can be configured to be compatible with all currently available transmitters on the market.
Smooth, linear and precise throttle response.
Separate voltage regulator IC for the microprocessor which provides a good anti-jamming capability.
Supported maximum motor speed: 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
Our pocket-sized Program Card can be purchased separately for easy programming.
With the optional program card you can choose 15 different tunes.
The Acer-Lab ESC Programming Card. This allows you to easily programme your ESC via a simple, friendly user interface. No need for the complex method of programmig through the throttle stick on your transmitter anymore!Output: Continuous 40A, Burst 55A for up to 10 Secs. Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery. BEC: 3A / 5V (Switch mode). Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. Size: 55mm (L) * 28mm (W) * 12mm (H). Weight: 35g.
Programming Card: Size: 92mm x 52mmx 6mm Weight: 26g
Be the first to review AL-40APC ACER-LAB 40A ESC with Programming Card. Write a review