Page

DJI Osmo Mobile 3 Firmware Update Guide

Here’s a simple step by step guide on how to update firmware on the Osmo Mobile 3 smartphone gimbal.

Step 1:

Before updating the firmware, ensure your phone has access to the internet and it correctly mounted to Osmo Mobile 3, and the Osmo mobile 3 has at least 30% battery.
(You can press the M button to check the battery level)

Step 2:

Power on Osmo Mobile 3, And Launch the DJI Mimo App.

Step 3:

Click on the icon in the top left corner to connect your Osmo Mobile 3 to your device.

Step 4:

After connecting your phone, a prompt will indicate that there is a firmware update available.

Step 5:

Tap “Found New firmware” to download the firmware package.

Step 6:

After the download is complete, press “Install”.

It will take 3-5 minutes to update, during which time, the system status LED will alternate between red and green.

(The gimbal will become loose during firmware update)

Step 7:

When the update is successful, the system status LED will become solid green.

A prompt will appear to indicate the update is successful.

Step 8:

If a prompt indicating update failure appears in the app, restart the gimbal and try again.

If the update fails multiple times, contact Heliguy for help.