What should I do if the Magnetic Phone Clamp is not accurately mounted to Osmo Mobile 6?

If the Magnetic Phone Clamp is not accurately mounted, the system indicator on the status panel will blink red.

Check if the dot on the back of the phone clamp is aligned with the dot on the roll axis motor of the gimbal.

After attaching the smartphone to the gimbal, rotate the roll axis motor to ensure a firm connection between the two. The system status indicator will turn yellow or green when the two dots are aligned.


This answer was generated from information sourced from the following pages:

heliguy™ Knowledge Base

Learn everything from basic drone terminology to advanced UAS concepts and best practices.

Ask a Question