Built on the original Cellpro 10s charger technology and feature set, the ALL NEW Cellpro 10XP is designed to provide a whopping 15A max current output, and 600W of power (rated at 30V DC input when charging a 10s Li battery) - all without increasing the size from the original product, and available at an extremely competitive price, you will be hard-pressed to find a safer, faster, more-complete solution to meet your charging needs in the 600W class. Supporting manual charge currents up to 15A or AUTO Charge rates (1.0C, 2.0C, and 3.0C), the CP10XP is capable of safely charging one or two lithium battery packs. Add to this new features like Multi-Chemistry support (the CP10XP can charge Li, A123 (LiFePO4), NiCd, NiMH, and Pb battery types), Auto charge or discharge to storage levels (Li only), 10 user-configurable presets, free Charge Control Software (CCS).
As a lithium battery charger, the CP10XP still maintains the key aspects of the original 10s in that it is literally a plug and play device. After connecting the batteries to the charger, charging commences with the press of a button. The charger will always remember the last-used preset. But leave it up to FMA Direct to come up with clever, intuitive ways to support multiple chemistries. Out-of-the-box, the Cellpro 10XP is ready to handle virtually any type of battery available. Chemistries are assigned to user presets. Just select a preset, connect the battery, and press the START button. Chemistries, cell count, and current can also be changed at the charger on the fly. If using the free CCS (requires FUIM2 or FUIM3 PC USB interface), full access to available preset parameters are easily adjustable including preset names, selection for multiple canned fuel tables (to improve the accuracy of AUTO charge mode for your battery types), an more!
Because it is a Cellpro, it is designed to be safe first and foremost. It is virtually impossible to damage batteries with the Cellpro 10XP charger. It will not let you make a mistake. It must see all the cells in a Lithium pack and the sum of the cell voltages must equal the total pack voltage. It is ideal for charging one or two LiPo, LiIon, or A123 type batteries. When two packs are connected to the 10XP, it automatically interconnects them in series internally inside of the charger. It essentially sees all the individual cells as one pack of cells. It can handle 1s-5s on either or both balance charge ports, or it can handle up to a 10s battery pack using both ports. To achieve the full 15A max output current, connect both the balance connectors and the main leads from the pack(s) to the banana jacks. While the Cellpro 10XP can handle charging two packs of different capacities or charge states, it is mainly intended to support 2 pack charging when the packs are the same or similar capacity and state of charge, such as 2 x 4s packs which are wired together in series or parallel during operation in an electric aircraft.