With the Cendence remote controller, the initial idea was to combine the Inspire 2, Tracktenna, and CrystalSky monitor as a highly-integrated unit. As an essential part of this approach, Cendence offers modular components and controls that realise the full potential of Inspire 2 & Matrice 200 applications.
Includes Cendence Patch Antenna.
To improve overall control efficiency, Cendence provides up to five analogue control channels and over ten customizable buttons. The design of Cendence also offers antenna interchangeability. A high-gain antenna, or DJI’s Tracktenna, can augment the power of DJI Lightbridge technology, significantly increasing overall anti-interference and video downlink quality.
The two knobs on the front panel of the Cendence control the gimbal pitch and yaw. The right and left levers and 'focus adjust knob' tune your flight controller settings and camera in real-time allowing for pulled focus and aperture setting. For rapid camera adjustments, you can customise several shortcut buttons.
Rotate the dials or toggle the right and left levers while holding certain (customisable) buttons to control gimbal roll, shutter speed and ISO amongst other settings.
The CrystalSky monitor mounts to the Cendence remote controller via the Cendence Monitor Mounting Bracket. Cendence's antennas, PCB, mounting bracket, and battery are all detachable, making its hardware upgradeable. Customising the controller for compatibility with future DJI aircraft has never been easier.
The USBA supports connection with other mobile devices. When precision camera control is required, Cendence can connect as either a master or slave controller with the Inspire 2's remote controller or another Cendence remote controller.
SDI and HDMI ports support broadcasting at 1080i50 and 720p60. Connect DJI Focus, Tracktenna, or other compatible accessories via the CAN port. Use Tracktenna to achieve stable and high-bandwidth transmission over long distances at 2.4GHz or 5.8GHz frequency bands. When used with the Inspire 2, Tracktenna can achieve a maximum data transmission speed of 10Mbps within a 2km range, dramatically improving video downlink quality. The USBA port supports connection with other mobile devices.
Cendence uses the same batteries as CrystalSky monitors for enhanced product synergy. If you run out of power, just swap in a charged battery or charge Cendence via the power port.
Practical accessories make using Cendence easy. The Cendence Support Rig takes on part of the controller’s weight, making it easier to hold for long periods of time. Control Stick Covers prevent dust from entering both sticks, ensuring smooth and reliable control. The Interchangeable Mobile Device Holder lets you attach a phone or tablet instead of a CrystalSky monitor.
The DJI Cendence is currently compatible with the Inspire 2 and Matrice 200 aircraft series.
GENERAL
What are the main differences between the DJI Cendence and the Inspire 2 and Matrice 200 remote controllers?
Unlike the Inspire 2 and Matrice 200 controllers, the Cendence has a built-in ultra bright LCD display monitor. A variety of functions in the app can be activated by customizable buttons on the controller. Operation time is longer, and batteries and antennas are interchangeable. The Cendence is better equipped to excel in complex environments and is compatible with DJI’s CrystalSky monitor.
Why does the Cendence have SDI ports?
The standard broadcasting signal can be exported via SDI ports, which enables the Cendence to be used in live broadcasting scenarios.
What are the CAN ports on DJI's Cendence used for?
CAN ports allow Cendence to connect to DJI Focus, Tracktenna, or external GPS modules.
Does the Cendence support dual operator control?
Yes. You can set one master and one slave controller.
Is the LCD display on the Cendence touch screen?
No.
How do I reset the functions of the custom buttons?
You can reset the functions of the custom buttons via the app you are using.
Can Cendence switch between 2.4 GHz and 5.8 GHz frequency bands?
Yes.
Can I refit the Cendence myself?
For now, no. However, DJI plans to make SDR and Wi-Fi expansions available soon.
Can the Cendence use CrystalSky batteries?
Yes.
What do I do if video transmission signal is weak when using the Cendence?
Check if there is any interference in the surrounding area and adjust antenna direction accordingly.
What is the Cendence’s video transmission range?
7km when FCC compliant.
Can I set joystick responsiveness?
Yes.
What are the functions of the LCD display?
The LCD screen displays camera parameters, flight status, remote controller, battery information and more.
Do I need to remove the batteries when charging the Cendence?
No.
Here are the full specs for DJI's customizable Cendence Remote Controller.
Model Type | GL800A |
Operating Frequency | 2.400-2.483 GHz; 5.725-5.825 GHz |
Max Transmitting Distance (unobstructed, free of interference) | 2.4 GHz: 4.3 miles (7 km, FCC); 2.2 miles (3.5 km, CE); 2.5 miles (4 km, SRRC) 5.8 GHz: 4.3 miles (7 km, FCC); 1.2 miles (2 km, CE); 3.1 miles (5 km, SRRC) |
E I R P | 2.4 GHz: 26 dBm (FCC); 17 dBm (CE); 20 dBm (SRRC) 5.8 GHz: 28 dBm (FCC); 14 dBm (CE); 20 dBm (SRRC) |
Power Supply | Intelligent Battery (Type: WB37-4920mAh-7.6V) |
Intelligent Battery | 4923 mAh LiPo |
Charging | DJI charger |
Output Power | 20 W (supplying power to DJI CS550 monitor) 12 W (without supplying power to monitor) |
Video Output Ports | USB, HDMI, SDI |
USB Supply Power | iOS: 1 A, 5.2 V (Max); Android: 1.5 A, 5.2 V (Max) |
Dual User Capability | Host-and-Slave connection |
Operating Temperature | -4 ° to 104 °F (-20 ° to 40 °C) |
Storage Temperature | Less than 3 months: -4 ° to 113 °F (-20 °to 45 °C) More than 3 months: 72 °to 82 °F (22 °to 28 °C) |
Charging Temperature | 32 ° to 104 °F (0 °to 40 °C) |
Charging Time | About 2 hours and 24 minutes (using an 180W charger) |
Supply Power Time | About 4 hours (only Master remote controller function enabled and without supplying power to monitor) |
Weight | 1041 g |
delivery information
FREE UK Delivery for orders over £99
UK Delivery Option
Option | Details |
---|---|
DPD Next Day | Item will be delivered the next working day. |
DPD 10:30am Delivery | Item will be delivered by 10:30am on the next working day. This option costs £12. |
DPD Saturday Delivery | Item will be delivered on the next Saturday. The option costs £15. |
Option | Details |
---|---|
Royal Mail First Class | Item will be delivered the next working day. This option costs £7. |
Option | Details |
---|---|
Collect from Heliguy | Pick up your items from Heliguy HQ, at Unit 9, Jupiter Court, Orion Business Park, North Shields, NE29 7SE. We are open Monday to Friday, 9am to 5pm. This option is free. |
International
We offer a comprehensive shipping service to countries around the world. For more information about costs and length of delivery, please see details on costs and delivery estimates in the checkout when you are buying your item.
Get in touch
Telephone
UK: 0845 838 8652
ordered a mavic 2 pro, got it next day , what more could you wish for.
September 29,2019
Excellent service
September 28,2019
good product, rapid delivery. Ordering process straightforward
September 28,2019
Quick and efficient service and quick delivery ordered Tues afternoon and here on Wed and very helpful on the phone
September 21,2019
Very easy transaction and very quick delivery. Glad I ordered from Heliguy!
September 17,2019
Helpful website, competitive prices and rapid delivery. Thank you
September 17,2019
Excellent service all-round. Always willing to go the extra mile.
September 15,2019
My order was dispatched the same day I made the purchase and it was with me the following day. Very happy with everything and I have no complaints.
September 11,2019
I go to Heliguy for all my drone requirements, I have used them for my commercial training and to purchase all my drones, and they've always been fantastic. They are great at listening to your requirements and recommending the correct kit, all at competitive prices and with a very friendly service. I couldn't recommend them enough, A+++++
September 2,2019
Easy and quick
September 1,2019
Wednesday
2
October
From: Ron
Happy
Simple Question, Quick Answer. Thank you.
Saturday
21
September
From: Andrew Christie
Happy
Great help and have gave me a great solution to my problem !
Thursday
19
September
From: Derek Prentice
Happy
Great information thanks. Will have a good look over and decide on way forward soon. Cheers
Wednesday
18
September
From: Paul
Happy
Very fast response, very helpful advice. Thankyou
Tuesday
17
September
From: Colin Howell
Happy
Excellent straight forward advice and help as always
Monday
16
September
From: James
Happy
Jamie was knowledgable, polite and very efficient. A welcomed new addition to the team! Many thanks Jamie.
Wednesday
11
September
From: Carl Hamilton
Happy
As before - excellent service - thanks.
Monday
9
September
From: Carl Hamilton
Happy
Steve was friendly, professional and knowledgeable. He listened to what was needed and was able to understand our requirements and advise appropriately.
Monday
9
September
From: David Bowes
Happy
Great advice and help as a customer. Thanks again.
Friday
6
September
From: George
Happy
Very helpful and insightful