The DJI Goggles have been designed to offer a seamless FPV experience when piloting DJI's products. Combining a pair of large exemplary quality screens, long range, low-lag wireless connectivity and direct control of photo and video capture.
DJI Goggles offer both 720p/60fps and close range 1080p/30fps viewing with a latency of just 110ms. Through DJI's OcuSync wireless transmission system, up to four devices can be connected to the Mavic Pro simultaneously. Antennas built into the headband ensure 360° of coverage, offering a reliable connection even if the aircraft is flying behind you. This enables you to share an immersive flight experience with friends by giving them a bird's eye view of the world as you pilot their experience.
Typical '2K' screens inside the goggles are split into two 1280x1440 sections, one for each eye. When viewing a 16:9 image, some sections are further cut off, leaving only a quarter of the available pixels. DJI Goggles have two 1920x1080 screens providing more than twice the amount of pixels of a typical 2K single screen.
Each screen packs its pixels together tightly so you see a clean, cohesive image with no latticing. DJI Goggles use a beam splitter to display an image in front of each eye, as well as polarisation to prevent any image overlap. This allows it to create genuineFull HD 1920x1080 resolution per eye. When used with the large aperture aspheric lens, an 85° field of view per eye is created for maximum immersion.
Your head movements control both aircraft yaw and camera tilt in Head Tracking Flight mode as with remote controller sticks. All you need to do is turn left or right to yaw left or right, and straighten your head to stop turning. In Head Tracking Gimbal mode only the gimbal will move without affecting yaw. Access to key intelligent features through a touchpad integrated into the DJI Goggles or 5D button on the Mavic Pro controller makes navigating the internal menu system easy and intuitive.
DJI Goggles are a perfect pair with DJI's new Intelligent Flight Mode: Fixed-Wing Mode. In this mode, the aircraft doesn’t turn left or right but instead flies forward with enough rotational movement for realistic flight simulation. Combined with Head Tracking Mode, you can use your head to control the Mavic Pro for a fully realised flight experience.An AR trajectory prediction feature in Fixed-Wing Mode makes using this mode in complex environments safer. Other Intelligent Flight Modes include Terrain Follow, ActiveTrack, TapFly, Cinematic Mode and Tripod Mode.
A unique solid headband design balances and spreads the weight of DJI Goggles around the head evenly, minimising pressure on the face and keeping them comfortable to wear for hours. People who wear glasses are also able to wear them comfortably. The screen portion of DJI Goggles can be flipped up to glimpse the real world, or detached entirely for easy storage and portability. A range of built-in interfaces allows DJI Goggles to work with a wide range of devices.
What is the correct way to put on and wear the DJI Goggles?
1. Insert the headband buckle into the slot above the lenses until you hear a click. Check that it has been fastened securely.
2. Align the lenses over your eyes and pull the strap down. Adjust the strap knob until the headset fits snugly and comfortably on your head.
Can I wear glasses while using the DJI Goggles kit?
Yes. The DJI Goggles can be worn over glasses.
Are the DJI Goggles water-resistant?
No, they are not.
How do I adjust the interpupillary distance (IPD) between the lenses?
First, turn the IPD knob to adjust the distance between the lenses until the images are aligned. When the images align, you will have the most suitable pupil distance for you.
How do I avoid touching the touchpad by mistake?
You can lock the touchpad by swiping backwards with two fingers.
When pressing and holding down the power button, my DJI Goggles sometimes only work sporadically. Why?
To ensure normal system functioning, the DJI Goggles will not respond to any on/off command within 10s after the last turn on/turn off.
How many DJI Goggle units can you connect to one Mavic Pro drone?
Apart from pairing the DJI Goggles with a Mavic Pro drone and the remote controller, there are two other connection combinations:
1. One Mavic Pro drone + two DJI Goggles + two Mavic Pro remote controllers
2. One Mavic Pro drone + one DJI Goggles + two Mavic Pro remote controllers
What happens when more than one pair of DJI Goggles / remote controllers are connected to the same drone?
In Coach Mode, only the master remote controller can change the flight mode. The drone starts to respond to the slave remote controller only when the master remote controller doesn't give any commands for more than two seconds. The master remote controller can override anytime. In Dual Operation Mode (one drone + two DJI Goggles + two remote controllers), the slave DJI Goggles will not support Head Tracking Mode. If the remote controller and DJI Goggles are being operated by the same user, a spotter who is able to give instructions and warnings is required to ensure safe flying.
Which DJI products can you connect with the DJI Goggles through USB cables?
What devices can be connected with the DJI Googles using the HDMI connector?
Any device that has an HDMI port.
What is the Micro SD Card slot on the DJI Goggles used for?
The Micro SD Card slot on the DJI Goggles is used to download files from the aircraft to the goggle’s onboard SD card for backup and to view captured video files.
Can I download videos not recorded by a drone to a Micro SD Card and then insert them into the DJI Goggles to watch them?
Why is the Mavic Pro the only drone that can be connected to the DJI Goggles wirelessly?
Because of OcuSync. The same video transmission system carried by the Mavic Pro has also been integrated into the DJI Goggles, making the wireless connection between these two devices possible.
What are the main differences between HD Mode and Smooth Mode?
In HD Mode, the resolution of video transmission footage reaches 1080p/30fps for near field, lowering to 720p/30fps for far field or when affected by interference. In Smooth Mode, the resolution will remain at 720p/60fps. The former is a more clear and immersive FPV experience, and the latter is for smoother FPV footage.
Why does the video transmission image quality in my DJI Goggles sometimes change?
The resolution of video transmission footage seen in the DJI Goggles changes along with the video recording resolution. Therefore:
1. When a video is recorded at 4K, the highest video transmission resolution is 720p/30
2. When a video is recorded at 2.7K, video transmission resolution tops out at 1080p/30
3. When a video is recorded at 1080p or below, depending on whether the frame rate is higher than 30fps or lower than 30fps, the max video transmission resolution will be 720p/60fps or 1080p/30fps, respectively.
What is the difference between the DJI Goggles 1080p screens and other 2K screens?
Typical “2K” screens inside other brands of goggles are split into two 1280x1440 sections, one for each eye at 720p. The DJI Goggles use dual 1080p screens, meaning that each screen has a maximum resolution of 1920*1080.
What kind of latency is there when the DJI Goggles are connected with different devices?
HD video downlink latency (near field and free of interference) can be as low as: 110 ms (Mavic Pro, 720p60, video format: 720p120) 150 ms (Phantom 4 series, 720p60, video format: 720p60/720p120) 140 ms (Inspire 2+X5S, 720p60, video format: 1080p120) 190 ms (Inspire 2+X4S, 720p60, video format: 1080p60)
How do I update the DJI Goggles firmware?
There are three main ways to update firmware:
1. Directly connect your DJI Goggles to a PC.
2. Pair your remote controller, drone, and DJI Goggles before connecting the remote controller to a PC, and update all three devices together.
3. Pair your remote controller, drone, and DJI Goggles, then connect the remote controller with the DJI GO app (or GO 4.0) to update the three devices simultaneously within the app.
Do the DJI Goggles offer the same functions no matter what device they're connected to? If not, what are the main differences?
No. For specific functions relating to different devices the DJI Goggles are connected to, please refer to the user manual.
Why does a drone connected to the DJI Goggles keep rotating in Head Tracking Mode even when I have already stopped moving?
In Head Tracking Mode, a drone's yaw depends on the pilot's head movements. If the pilot doesn't stop where he began, the drone will keep rotating until the pilot turns his head back to the original position.
Why do the C1/C2 buttons on the Mavic Pro controller stop responding when the drone is connected to the DJI Goggles?
For ease of operation, when the Mavic Pro is connected to the DJI Goggles, the C1/C2 buttons are automatically set to the Fn/Back buttons, which function the same as on the DJI Goggles.
Learn more about how the DJI Goggles work to provide you with a superb FPV experience.
|Goggles: 495 g|
Headband: 500 g
|Goggles: 195×155×110 mm|
Headband(Folded): 255×205×92 mm
Field Of View
|85° (single screen)|
Interpupillary Distance Range
|58 – 70 mm|
|3840×1080 (single screen: 1920×1080)|
|Same as the aircraft connected|
Video Downlink Resolution
|1080p 30fps, 720p 60fps, 720p 30fps|
Video Downlink Latency at least (Near field and free of interference)
|110 ms (Mavic Pro, 720p60, video format: 720p120) 150 ms (Phantom 4 series, 720p60, video format: 720p60/720p120) |
140 ms (Inspire 2+X5S, 720p60, video format: 1080p120)
190 ms (Inspire 2+X4S, 720p60, video format: 1080p60)
Max Operating Time
Operating Temperature Range
|32°F (0°C) - 104°F (40°C)|
|Micro USB, 3.5mm audio jack, |
HDMI type-D, Micro SD card slot
|HDMI 1.4b, HDCP 1.4|
|Gyroscope, Accelerometer, Proximity sensor|
|Input: 100-240VAC, 50/60 Hz. 0.5A|
Output: 5V,3A ; 9V,2A；12V,1.5A
FREE UK Delivery for orders over £99
UK Delivery Option
DPD Next Day
Item will be delivered the next working day.
DPD 10:30am Delivery
Item will be delivered by 10:30am on the next working day.
This option costs £12.
DPD Saturday Delivery
Item will be delivered on the next Saturday.
The option costs £15.
Royal Mail First Class
Item will be delivered the next working day.
This option costs £7.
Collect from Heliguy
Pick up your items from Heliguy HQ, at Unit 9,
Jupiter Court, Orion Business Park, North Shields,
NE29 7SE. We are open Monday to Friday, 9am to 5pm.
This option is free.
We offer a comprehensive shipping service to countries around the world. For more information about costs and length of delivery, please see details on costs and delivery estimates in the checkout when you are buying your item.
Get in touch
UK: 0845 838 8652
ordered a mavic 2 pro, got it next day , what more could you wish for.
good product, rapid delivery. Ordering process straightforward
Quick and efficient service and quick delivery ordered Tues afternoon and here on Wed and very helpful on the phone
Very easy transaction and very quick delivery. Glad I ordered from Heliguy!
Helpful website, competitive prices and rapid delivery. Thank you
Excellent service all-round. Always willing to go the extra mile.
My order was dispatched the same day I made the purchase and it was with me the following day. Very happy with everything and I have no complaints.
I go to Heliguy for all my drone requirements, I have used them for my commercial training and to purchase all my drones, and they've always been fantastic. They are great at listening to your requirements and recommending the correct kit, all at competitive prices and with a very friendly service. I couldn't recommend them enough, A+++++
Easy and quick
Simple Question, Quick Answer. Thank you.
From: Andrew Christie
Great help and have gave me a great solution to my problem !
From: Derek Prentice
Great information thanks. Will have a good look over and decide on way forward soon. Cheers
Very fast response, very helpful advice. Thankyou
From: Colin Howell
Excellent straight forward advice and help as always
Jamie was knowledgable, polite and very efficient. A welcomed new addition to the team! Many thanks Jamie.
From: Carl Hamilton
As before - excellent service - thanks.
From: Carl Hamilton
Steve was friendly, professional and knowledgeable. He listened to what was needed and was able to understand our requirements and advise appropriately.
From: David Bowes
Great advice and help as a customer. Thanks again.
Very helpful and insightful