The Ronin M is a new and exciting piece of handheld, camera stabilisation technology which has been developed with film making professionals in mind.
The brushless motor gimbal system allows the Ronin-M to be used with a wide range of cameras of different sizes and weights up to a maximum of 3.6kg (8 lbs). It’s the smaller, lighter brother of the highly successful DJI Ronin, which was designed for larger camera setups. It weighs just 2.3kg (5 lbs) which is around half the weight of the Ronin.
The Ronin M is a very adaptable piece of kit. It can be used in three different positions: underslung mode, upright mode and briefcase mode, making it highly adaptable for changing viewpoints and also allowing access in tight locations.
The Ronin-M’s brushless gimbal stabilisation system is not simply three brushless motors moving on three axes. The motors work with positional feedback and the IMU (Inertial Measurement Unit) to communicate with DJI’s custom 32-bit processor. It processes movement calculations in milliseconds. This reduces angular vibration to less than ±0.02˚ of translated movement, meaning that the camera will remain perfectly steady.
Save time and start shooting professionally stabilised video in under five minutes. Mount your camera to the Ronin-M, quickly balance it, and then tap a button. The upgraded ATS (Auto Tune Stability) technology is more precise than before and completes the tuning and balancing processes with no tools necessary. Easy and efficient.
Capture tight shots, even when you have almost no space to work, and easily transport your Ronin-M. The top handle bars quickly and easily twist off, allowing you to minimize its size, achieve different shooting configurations, and pack or unpack it in seconds.
Your Ronin M stands up to rugged use in any filming environment. Featuring a superbly strong and rigid magnesium frame, the new Ronin brings increased stiffness and reduced weight. Notoriously difficult to manufacture and mould, magnesium brings you a new, more exact shooting experience while maintaining easy manoeuvrability and increasing options on set.
Increased rigidity is provided by a single, complete piece of finely-tooled magnesium that forms the U-shaped arm holding the camera plate. Only made possible by DJI’s large manufacturing reach and expertise, this unified design eliminates imperfections that are common in systems made of multiple pieces assembled together. This arm gives you not only greater stability but also reliability, as there is no potential for separate components to come apart.
Designed with high performance in mind, the brushless motors are incredibly precise and powerful while maintaining low vibration and increasing torque. Industry-leading accuracy is increased even further with Digital Absolute Positioning Encoders in each axis, and a much larger range of controllable motion on both the tilt (105⁰ Up, 165⁰ Down) and roll (± 110⁰) axes.
When shooting indoors or in tight spaces, a new Silent Mode reduces the sound of each motor to almost inaudible levels. The stabilization algorithms are instantly changed to focus on strength for minute changes and stabilization, ensuring the sound of the motors is not recorded by sensitive microphones or other recording equipment.
Capture anything you can imagine with a second operator controlling the camera’s movements as the first operator moves around set. Achieve perfect framing and complete more complex camera moves by working together and making your camera’s movement completely independent of the person holding it.
Easily mount your Ronin M with a quick-release system that is compatible with a wide range of universal connections. Remove the top bar assembly in seconds and put your Ronin on a jib, crane, tripod, or anything else. A convenient, easy to fold and carry gimbal tuning stand is also included. The support arm assembly is detachable allowing for mounting onto a standard 5/8” stud.
Film all day, until you get every shot. The smart battery gives you a running time of more than six hours. Overcharge and over depletion protection is built in, as is individual cell charge balancing. Remaining power is shown by LEDs and in the Assistant mobile app.
A dedicated power distribution box keeps wiring to a minimum while providing power to your key accessories. Two regulated 12V P-taps, one 500mAH full-size USB connector, and a DJI Lightbridge connector enable you to connect and provide power to everything you need.
Simple to setup, shoot then pack away.
The Ronin-M's battery provides over six hours of shooting time.
Silent mode ensures that motor noise doesn't ruin your shot.
A new and improved magnesium frame ensures that the Ronin M is a tough piece of kit.
Half the weight of the Ronin, it's so easy to carry.
The Ronin-M is available to purchase from Heliguy.
Visit our DJI Ronin accessories page to see out full range of add-ons and extras.
When it comes to drones, our UK team have an unrivalled level of expertise. Offering peerless tech support, repair services and even free next day delivery across the UK, we are dedicated to ensuring our customers are given the best possible drone experience.
Stabilisation for professional filmmakers, everything you need to know about the new DJI Ronin:
|Three Operation Modes|
Built-in, independent IMU module
DJI Specialized Gimbal Drive Motors with Encoders
DJI Advanced 32-Bit DSP Processor
D-Bus Receiver Supported
|Static current: 300mA (@16V)|
Dynamic current: 600mA (@16V)
Locked motor current: Max 10A (@16V)
|5°F ~ 120°F (-15°C ~ 50°C)|
|2.3kg (5.07lb) fully loaded with handlebar|
|500mm(W) x 210mm(D)x 420mm(H)|
Camera Tray Dimensions
|Maximum depth at center of mass on camera base plate: 120mm|
Maximum height measured from top of camera base plate: 195mm
Maximum width: 160mm
Accessory Power Connections
|12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1|
GCU Input Power
|4S Ronin M Battery|
|2.4GHz Remote Controller, Bluetooth 4.0, USB 2.0|
PC Assistant Software Requirements
|Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)；Mac OS X 10.9 or above|
Mobile Assistant Software Requirements
|Mobile Device: iOS 6.1 or above, Android 4.3 or above|
Load Weight (Reference Value)
Angular Vibration Range
Maximum Controlled Rotation Speed
|Pan axis: 90°/s|
Tilt axis: 100°/s
Roll axis: 30°/s
Controlled Rotation Range
|Pan axis: 360°|
Tilt axis: +105° to -190°
Roll axis: ± 110°
Mechanical Endpoint Range
|Pan axis control: 360°|
Tilt axis control: +105° /-190°
Roll axis control: ± 25°
FREE UK Delivery for orders over £99
UK Delivery Option
DPD Next Day
Item will be delivered the next working day.
DPD 10:30am Delivery
Item will be delivered by 10:30am on the next working day.
This option costs £12.
DPD Saturday Delivery
Item will be delivered on the next Saturday.
The option costs £15.
Royal Mail First Class
Item will be delivered the next working day.
This option costs £7.
Collect from Heliguy
Pick up your items from Heliguy HQ, at Unit 9,
Jupiter Court, Orion Business Park, North Shields,
NE29 7SE. We are open Monday to Friday, 9am to 5pm.
This option is free.
We offer a comprehensive shipping service to countries around the world. For more information about costs and length of delivery, please see details on costs and delivery estimates in the checkout when you are buying your item.
Get in touch
UK: 0845 838 8652
ordered a mavic 2 pro, got it next day , what more could you wish for.
good product, rapid delivery. Ordering process straightforward
Quick and efficient service and quick delivery ordered Tues afternoon and here on Wed and very helpful on the phone
Very easy transaction and very quick delivery. Glad I ordered from Heliguy!
Helpful website, competitive prices and rapid delivery. Thank you
Excellent service all-round. Always willing to go the extra mile.
My order was dispatched the same day I made the purchase and it was with me the following day. Very happy with everything and I have no complaints.
I go to Heliguy for all my drone requirements, I have used them for my commercial training and to purchase all my drones, and they've always been fantastic. They are great at listening to your requirements and recommending the correct kit, all at competitive prices and with a very friendly service. I couldn't recommend them enough, A+++++
Easy and quick
Simple Question, Quick Answer. Thank you.
From: Andrew Christie
Great help and have gave me a great solution to my problem !
From: Derek Prentice
Great information thanks. Will have a good look over and decide on way forward soon. Cheers
Very fast response, very helpful advice. Thankyou
From: Colin Howell
Excellent straight forward advice and help as always
Jamie was knowledgable, polite and very efficient. A welcomed new addition to the team! Many thanks Jamie.
From: Carl Hamilton
As before - excellent service - thanks.
From: Carl Hamilton
Steve was friendly, professional and knowledgeable. He listened to what was needed and was able to understand our requirements and advise appropriately.
From: David Bowes
Great advice and help as a customer. Thanks again.
Very helpful and insightful