The Zenmuse XT2 from DJI and FLIR, combines DJI's expert gimbal technology and FLIR's industry-leading thermal technology in a dual thermal and visual camera for enterprise users.
The XT2 features dual 4K, 12MP, 1/1.7″ CMOS visual sensor and FLIR Tau 2 thermal sensor.
An IP44 rating allows the XT2 to be used is a wide range of weather conditions.
The Zenmuse XT2 features a wealth of intelligent modes to increase the efficiency and reliability of each mission. The following features are available:
Temperature Alarms – Receive notifications when temperatures exceed your configured limits
Heat Tracking – Locate the hottest object in view quickly and easily
FLIR MSX – Overlay the thermal and visual data allowing you to access even more data
Real-Time Temperature Check – Get accurate temperature warnings in real-time
Quick Track – Simplify your mission by only tracking a desired object
Isotherms – Focus on a specific temperature band to only target your desired results
Colour Palettes – Select your desired colour palettes
PiP Options – Simply configure your desired picture in picture options whilst in flight
The Zenmuse XT2 is compatible with the following DJI drones:
The Zenmuse XT2 is available in 12 variants, with different lens sizes, resolutions and thermal frame rates.
The below models are available:
The Zenmuse XT2 is available for use in a variety of different applications.
The below are just some of the areas the XT2 will benefit:
1 x Zenmuse XT2
2 x SD Cards (32GB)
1 x Hard Case
Can I change the lens on the Zenmuse XT2?
No - the lens is fixed.
Where is data saved on the XT2?
Two SD cards are available on the XT2.
How is data recorded?
Visual data is saved in JPEG, TIFF, R_JPEG, MP$ and Mov.
Thermal data is saved in TIFF SEQ and SEQ.
|25mm Lens Attached: 123.7x112.6x127.1mm|
Other lens: 118.02x111.6x125.5mm
Digital Video Display Format/FPA
Full Frame Rates
Exportable Frame Rates
High Gain Scene Range
|640×512: -25° to 135℃|
336×256: -25° to 100℃
Low Gain Scene Range
|-40° to 550℃|
Photo - Format
|JPEG, TIFF, R-JPEG|
Video - Format
|8 bit: MOV, MP4 14 bit: TIFF Sequence, SEQ**|
Digital Detail Enhancement
Angular Vibration Range
|Tilt: +30° to -90°|
|Tilt: +45° to -130°|
Roll: -90° to +60°
Maximum Controllable Speed
Focus at 8 mm
FOV 57.12°× 42.44°
|1x, 2x, 4x, 8x|
4K Ultra HD Resolution
|Record, Capture, Playback|
Still Image Mode
|Auto, 50 Hz, 60 Hz|
|FAT 32 (≤32GB), exFAT (>32GB)|
|128 GB. UHS-3 required|
|Sandisk Extreme 16/32 GB UHS-3 microSDHC, Sandisk Extreme 64/128 GB UHS-3 microSDXC|
|9 mm, 13 mm, 19 mm, 25 mm|
640×512 FoV, iFoV
|N/A, f/1.25 45°×37° 1.308 mr, f/1.25 32°×26° 0.895 mr, f/1.1 25°×20° 0.680 mr|
336×256 FoV, iFoV
|f/1.25 35°×27° 1.889 mr, f/1.25 25°×19° 1.308 mr, f/1.25 17°×13° 0.895 mr, N/A|
Minimum Focus Distance
|3.2 cm, 7.6 cm, 15.3 cm, 30 cm|
|2.1 cm, 4.4 cm, 9.5 cm, N/A|
Hyperfocal Depth of Field
|1.1 cm, 2.2 cm, 4.8 cm, N/A|
|The SD card is located near the lens. It's used to store TIFF Sequence and SEQ infrared RAW video only. The other format footage will be stored on the other SD card.|
Highly experienced team in their knowledge of drones & very willing to share their expertise with customers & general public. They have a great website with a vast array of kit. Competitively priced & fast delivery service. I can highly recommend them.
Fast delivery considering I bought in-between Christmas & new year. Spot-on item at a great price too.
Excellent service. Online ordering was well executed, product delivery was bang on time, and customer service was print and very helpful. The Osmo Pocket I bought worked as advertised.
Very professional and very helpful.
Just pre-ordered that's all
Always great service, I don’t go anywhere else.
slight hiccup with delivery but easily resolved
everything went smoothly great customer service and sales staff highly reccomended
Quick response and above and beyond what I expected with respect to customer care
From: Colin barr
Can’t thank All concerned at heliguy especially Matthew and Michael Fantastic service and help over phone Highly recommended Will go nowhere else for my drone needs Many thanks
From: John Kirk
Thanks for your help. I think I will design one. I did see one that wraps around the base of the handle and has the tripod screw thread offset to the side. I think I can do better, a hinged bottom plate, with a tripod screw hole in the center and a clasp that inserts into the handle release slot.
Fabulously informative. I'm a professional photography by trade but I'm new to drones and perhaps asked some daft questions but they were replied very professionally and very informatively. Many thanks!
From: Michael Fox
Both my emails where answered to help try and fault find my problem, so I can see if it would be cost affective to repair myself. Before deciding weather it's worth spending too much to have the drone sent in for repair.
From: Lynne Medlock
Thank you for sending the receipt over so promptly, really appreciate your help!
I requested a repair. Told heliguy what was wrong. He gave me advice. Totaly sorted all my problems so didnt have to send away. I got a response 29 minutes after i messaged. (Dji still havnt been in contact 24 hours later) saved me a small fortune and will deffo be using these services again. Thanks heliguy
From: Derek Gardiner
Helpful and getting there
From: Alistair Holmes
Very prompt response.
From: Eugenio Manghi
Thank you for the quick answere. It helped me a lot.