Ronin 2 Professional Combo Bundle
This DJI Ronin 2 Bundle features everything a professional filmmaker would need to create amazing results with the Ronin 2 camera stabilisation system.
The Ronin 2 is an incredible versatile system, with support for a range of professional cameras including Red Dragon, ARRI Alexa Mini, Black Magic Ursa Mini, Canon C300, Sony FS7, all with a wide range of lenses.
It has more power than the original Ronin, the Ronin 2 can keep shots stable even in 75mph winds!
It can be mounted on a car, used with a cablecam system, attached to a jib or used with the Grip as a handheld stabiliser.
The Ronin 2 also allows everyone to capture amazing shots that previously would have needed specialist expertise in the past, including sweeping panoramas and timelapse footage.
It'll also handle almost any conditions, thanks to a rugged construction with splash-proof enclosed motors and redundant sensors.
DJI Ronin 2 Professional Combo - In The Box
- 1 x DJI Ronin 2 Gimbal
- 1 x Carrying Case
- 1 x DJI Ronin 2 Power Hub
- 1 x Camera Mounting Plate
- 1 x Camera Upper Mounting Plate
- 1 x Remote Controller
- 1 x Battery Compartment
- 2 x TB50 Intelligent Batteries
- 1 x Battery Charger
- 1 x Power Cable
- 1 x Charging Hub
- 1 x Ronin 2 Grip
- 1 x Ronin 2 Universal Mount
- 1 x Monitor Mounting Bracket
- 1 x 15mm Rod Mount
- 1 x 15mm Extension Rod
- 1 x Accessories Package (Screws and Hex Keys)
- 1 x Cables Package, including 1 of each of the following: Red Power Cable, Arri Power Cable, 2-pin Power Cable, DC Power Cable, 6-pin-to-P-tap Adapter, USB Type-C Data Cable, Control Cable for Red, Control Cable for Arri, Ronin 2 Power Cable, S-Bus Receiver Cable.
- 1 x Manual Package
DJI Ronin 2 - The Ultimate Filmmaking Gimbal
The Ronin 2 has been designed to be the next level of quality in professional filmmaking gimbals. The latest in DJI's hugely successful Ronin gimbal range, the Ronin 2 offers more variety, quality and stability to those serious about capturing the best possible footage.
Powerful & Versatile
The DJI Ronin 2 has been made to let filmmakers capture a scene as they see it in their mind. Upgraded high torque motors allow it to support a wider range of cameras, resisting high winds and g-force which is likely to be caused when the gimbal is mounted to a fast-moving car and keep it moving and recording smoothly.
A newly designed detachable grip allows the DJI Ronin 2 to stand up on its own and can be easily separated when the lower part of the hand grip isn't needed. It's also highly compatible with cable cams, drones, cranes, Steadicams, and more.
Simplicity & Intelligence
The simplicity of Ronin has been amplified with Ronin 2, making setup and use easier than ever. Everything, from mounting cameras to balancing and tuning, powering accessories and transportation has been tweaked and refined for ease and speed.
Enhanced intelligence means filmmakers can get shots with Ronin 2 that would once have needed specialist expertise or additional equipment, from total smoothness control to studio-oriented smart features.
Power systems are now tightly integrated into Ronin 2, capable of powering its motors and the attached camera and accessories without dangling cables or multiple power systems. As it uses a dual battery system, filmmakers can hot swap to keep the camera and accessories powered and maximise shooting time.
The built-in GPS provides Ronin 2 with essential information for gimbal acceleration and speed, which is crucial for maintaining the camera’s position and the horizon level when moving at high speeds.
Robust & Reliable
Every element of Ronin 2 has been designed to maximise reliability, from materials to the splash-proof enclosed motor design, cable management, and redundancy. All of this creates a system that shines in the most demanding of shooting environments.
A carbon fiber build enables Ronin 2 to perform well in extreme weather conditions. Light and durable, it is reliable in the most testing scenarios. Robust and resilient in extreme weather conditions, Ronin 2’s self-heating batteries ensure stable power output for high-performance in temperatures as low as -4°F (-20°C) and high heat environments. Dual batteries capable of operating simultaneously and independently provide complete redundancy, keeping the shoot going.
Ronin 2 FAQs
What are the main differences between the Ronin and Ronin 2?
Like the original DJI Ronin, the Ronin 2 was designed for handheld camera applications but is now more versatile with aerial, car mounting, cable cam and Steadicam capabilities. Higher torque motors give the DJI Ronin 2 a larger payload and new GPS algorithms allow it to perform smoothly in high-stress environments. Along with many other improvements, the Ronin 2 brings a whole new level of stabilisation to Ronin users.
What is the Ronin 2’s maximum payload?
The Ronin 2’s maximum payload is approximately 30lbs (13.6kg). Due to extensive testing, DJI's Ronin 2 can handle an Arri Alexa Mini with a Canon CINE-SERVO 17-120mm lens comfortably.
How much does the Ronin 2 weigh?
The Ronin 2 weighs approx 9lbs (4.2kg).
Overall, is stabilisation on the Ronin 2 higher-performing and more accurate than the Ronin/Ronin-M/Ronin-MX?
Yes. The Ronin 2 was created with stronger motors and its SmoothTrack algorithm has been enhanced for smoother performance. A new GPS module enables it to perform much better in high G-force situations.
Are all three previous modes of operation still available on the Ronin 2?
Yes. All three previous modes of operation — upright, underslung, and briefcase — are available with the Ronin 2. What’s new is that users can now transition between upright and underslung modes without changing the orientation of the camera. Users can now lock the yaw motor for 2-axis mode while using the Ronin 2 with a Steadicam. Now you can lock each axis for an easier setup, better balancing, and safer transportation.
How does the new yaw axis quick release differ from previous Ronins?
The new yaw axis quick release mount in the Ronin 2 means a faster set up in different scenarios, enabling an easier transition from handheld to cars and aerial applications.
Does the Ronin 2 come with a dedicated stand?
No. However, the Ronin 2’s new hand and ring grip design come with retractable feet so that the whole gimbal system can stand upright on a flat surface. The grip is detachable and can be separated when standing is not required for shooting or transportation.
What kind of batteries does the Ronin 2 use?
DJI's Ronin 2 uses the same batteries as the Inspire 2.
Are Ronin series batteries compatible with the Ronin 2?
No. The Ronin 2 is only compatible with Ronin 2 or Inspire 2 batteries and is NOT compatible with any previous Ronin series batteries.
How long is the battery life of the Ronin 2?
When powering the Ronin 2 and a RED Dragon camera simultaneously, the Ronin 2 dual battery system will last up to 2.5 hours.
How long does it take to fully charge the battery?
When using the Inspire 2 charging hub, it will take approximately 90 minutes to fully charge both batteries.
What is a hot-swappable battery?
A hot-swappable battery eliminates power-related downtime to ensure maximum available power. For example, when shooting a scene with batteries at low power, hot swappable batteries allow you to change one of the batteries without turning off the camera system, gimbal, or accessories. Hot-swappable batteries thus allow you to shoot continuously and uninterrupted.
Can I use the Ronin 2 battery with third party products like monitors?
Yes. The battery system is designed with a P-TAP port that allows you to power your accessories with industry standard power cables.
What cameras are compatible with the Ronin 2?
The Ronin 2 is compatible with a large number of cameras. The biggest we’ve tested so far is the Arri Alexa Mini with a Canon CINE-SERVO 17-120mm lens.
Do I have full control on the cameras mounted on the Ronin 2?
For selected cameras, users can control its settings such as ISO, frame rate, resolution or start/stop through our new camera control module.
What is the largest lens I can mount on the DJI Ronin 2?
The largest lens tested on the Ronin 2 with an Alexa Mini weighed about 6.6lbs (3kg). But the largest lens size varies based on different cameras.
Does the Ronin 2 come with a remote controller?
Yes. The new remote controller is smaller than before with a more functional joystick. It also has dual control frequency bands 2.4 GHz and 5.8 GHz.
What are the main differences between this and previous remote controllers?
Users can now change the control speeds of the joystick directly on the remote controller by tweaking the knobs, without changing any settings in the gimbal assistant app or directly on the Ronin 2.
What is the control range of the Ronin 2?
Unobstructed control range is over 1 km.
What is the new gimbal assistant app? What can I do with it?
The new gimbal assistant app has all the fundamental gimbal parameters such as SmoothTrack settings, motor stiffness, and gimbal operation modes. Included are new intelligent features that are studio-oriented such as Panorama, Timelapse and direct control of supported cameras.
What is the built-in screen for?
The Ronin 2’s new built-in ultra-bright touch screen provides the convenience of changing gimbal settings without using a mobile device directly on the gimbal. With the built-in screen, users are now able to change most of the settings they see on the new gimbal assistant app.
Can I use third-party remote controllers with the Ronin 2?
Yes, you can.
DJI Ronin 2 Specifications
See below for everything you need to know about DJI's Ronin 2 professional gimbal.
-Handheld, Car Mount, Aerial, Tripod, & Steadicam Mode
>Built-in, independent IMU module
>DJI Advanced 32-Bit ARM Processor
>DJI Specialized Gimbal Drive Motors with Encoders
>Dual Battery System
>D-Bus Receiver Supported
>2.4 GHz/5.8 GHz Receiver
>Built-in Touch Panel
>USB Type-C Connection
>Power and Video Signal through Slip Ring
MECHANICAL & ELECTRICAL CHARACTERISTICS
|Static current: 300 mA (@22.8 V)
Dynamic current: 500 mA (@22.8 V)
Locked motor current: Max 15 A (@22.8 V)
2.5 hours (when powering gimbal, camera and accessories at the same time)
|-4°F ~ 122°F (-20°C ~ 50°C)|
|Including handle bar: 12 lb (5.5 kg)
Excluding handle bar: 9 lb (4.2 kg)
|Excluding handle bar: 350 mm (W) x 416 mm (D) x 530 mm (H)
Including handle bar: 630 mm (W) x 416 mm (D) x 720 mm (H)
Camera Tray Dimensions
|Maximum depth from the centre of gravity on the camera base plate: 245 mm
Maximum height measured from top of the camera base plate: 165 mm
Maximum width: 180 mm
Accessory Power Connections
|14.4 V x 4 Camera Cage (Combined 8 A), 12.6 V x 2 Pan Motor (Combined 4 A), 12.6 V x1 P-Tap (8 A)|
GCU Input Power
|Intelligent Battery: 4280 mAh-22.8 V|
|2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, USB Type-C|
PC Assistant Software Requirements
|Windows 7 or above; Mac OS X 10.11 or above|
Mobile Assistant Software Requirements
|iOS 9 or above; Android 4.4 or above|
Load Weight (Reference Value)
|30 lbs (13.6 kg)|
Angular Vibration Range
Maximum Controlled Rotation Speed
|Pan axis: 400°/s
Tilt axis: 360°/s
Roll axis: 360°/s
Mechanical Endpoint Range
|Pan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±220°
Controlled Rotation Range
|Pan axis control: 360° continuous rotation
Tilt axis control: +45° to -135°
Roll axis control: ±45°