Full Description
DJI RSC 2 Camera Gimbal
Lightweight and foldable content-creation solution.
35% Lighter Than Original Ronin-S
The DJI RSC 2 is a lightweight and portable gimbal, featuring a new folding design.
This strong gimbal can support heavier cameras and boasts a new level of stability.
The RSC 2 is available as a stand-alone package, or as a Pro Combo with additional accessories, such as a Focus Motor, RavenEye Image Transmitter, and a carrying case.
Key features include:
- New foldable design
- New Briefcase Mode for unique shooting angles
- Lightweight; 30% less than original Ronin-S
- New quick-charge function
- 12 hours of battery life
- Intelligent shooting modes
- Support heavier payloads
- Compatible with a range of accessories to take content creation further
- Titan Stabilisation Algorithm creates new levels of stability
Which cameras are compatible with the DJI RSC 2?
RSC 2 Camera Compatibility Guide
The following cameras are compatible with the DJI RSC 2. Control features will vary depending on the camera and associated control cable.
Canon
- 5D MK III
- 5D MK IV
- 6D MK II
- EOS 200D Mark II
- EOS 5DS R
- EOS 6D
- EOS 77D
- EOS 800D
- EOS 80D
- EOS 90D
- EOS M50
- EOS R
- EOS R5
- EOS R6
- EOS RP
- G7 X Mark III
Sony
- A6100
- A6300
- A6400
- A6500
- A6600
- A7M2
- A7M3
- A7R2
- A7R3
- A7R4
- A7S
- A7S2
- A7S3
- A9
- A9 II
Panasonic
- G9
- G95
- GH3
- GH4
- GH5
- GH5S
- S1
- S1H
Nikon
- D780
- D850
- Z5
- Z50
- Z6
- Z7
Fujifilm
- X-E3
- X-H1
- X-T2
- X-T20
- X-T3
- X-T30
- X-T4
Blackmagicdesign
- BMPCC 4k
Sigma
- FP
Olympus
- E-M1 II
Z CAM
- Z CAM E2
A Sleek Way To Capture Dazzling Shots
The DJI RSC 2 has a new and portable folding design, making it easy to carry without adding additional weight to the gear list.
The innovative folding design also enables content creators to find creative ways of using the gimbal, such as vertical filming without additional accessories.
Meanwhile, the Briefcase mode allows the main gimbal arm to be loosened and slung forward to provide unique shooting angles.
The RSC 2 is constructed from durable materials like steel, as well as lightweight materials, such as aluminium, to reduce the weight.
The DJI RSC 2 weighs in at 1.2 kg (2.65 lbs), 30% less than the original Ronin-S, and has a folding footprint of 180×190 mm; that's the same size as a sheet of A5 paper!
Heavier Cameras, Greater Stabilisation, Smoother Footage
The RSC 2's built-in battery provides 12 hours of battery life.
It also features the new quick-charge function for a super-fast charge to provide extra endurance.
While the RSC 2 is light and portable, it also features stronger motors to support a tested payload of up to 3 kg (6.6 lbs).
This increased dynamic payload supports popular mirrorless cameras along with heavier combinations like the Panasonic S1H and a 24-70mm lens.
DJI RSC 2 is compatible with a wide array of camera models so users can get the most out of the system.
Bring Stories To Life
The RSC 2 has a range of creative modes and features.
The highlights include:
- New Time Tunnel: Perform a 360-degree roll while capturing hyperlapse. This adds a new dimension to your footage. Time Tunnel for the DJI RSC 2 will be available at a later date via a firmware update.
- Flashlight: The camera can be tilted all the way forward so users can grip the base like a flashlight.
- One-Tap Portrait Mode: Quickly orientate the gimbal into vertical shooting for professional-level social-media content.
- Panorama: Configure sensor and focal length, and then select a start and stop point for panoramas up to a gigapixel size.
- Roll 360: The gimbal adopts the Flashlight position and rolls the camera system 360 degrees.
- Timelapse: Capture subtle changes over lengths of time of your choosing. Timelapse is a classic feature!
Suite Of Accessories For Dynamic Content Creation
The RSC 2 can be customised with a range of accessories to help capture the best shot possible.
These accessories include:
- Cheese plate
- Focus Wheel
- 3D Focus System (coming at a later date after launch)
- Twist Grip Dual Handle
- RavenEye Image Transmission System
- Tethered Control Handle
When the RavenEye Image Transmission System is connected, users can utilise ActiveTrack 3.0. This sends a 1080p/30fps low-latency feed to a mobile device using the Ronin app from up to 100 metres away.
The Ronin app also enables vital features and functions to be controlled over long distances. This includes gimbal movement, using the virtual joystick and Force Mobile, so gimbal mimics the mobile device's movement.
Frequently Asked Questions
Find out more about the RSC 2
Compared with the Ronin-SC, the motors of DJI RSC 2 are about 50% more powerful, while the gimbal weight is reduced by about 25%. Equipped with a 1-inch black-and-white screen and Front Dial, DJI RSC 2 also features a foldable design, allowing it to adapt to any scenario with more flexibility.
No. The power/data ports on DJI RSC 2 are not waterproof or dustproof. Please keep away from water and dust during use.
The primary material used for DJI RSC 2's construction is aluminum alloy.
Press and hold the power button to power on/off the gimbal.
No. DJI RSC 2 has increased battery capacity to support up to 14 hours of battery life and allow use while charging. Use PD or QC 2.0 18W charger for fast charging.
The DJI RSC 2 has been tested with a dynamic payload of 3.0 kg during handheld use.
The DJI RSC 2 can be used for up to 14 hours when the battery is fully charged and the gimbal is balanced well.
When using an 18W charger, DJI RSC 2 can be fully charged in 2 hours.
Yes (except in high/low temperatures).
It is recommended to use chargers that comply with PD or QC 2.0 fast charging protocol with a charging power of 18W to charge the battery of DJI RSC 2. Any charger with higher power will only be charging DJI RSC 2 at 18W.
The Ronin app supports Ronin 2, Ronin-S, Ronin-SC, DJI RSC 2, and DJI RS 2.
When using DJI RSC 2, you can set up to five waypoints for Timelapse and up to 10 waypoints for Track.
When tracking a person, it is suggested to press the trigger once to select the subject in the centre of the frame. When tracking an object, it is suggested to frame the subject for more accurate recognition.
DJI RSC 2 can follow one subject at a time during ActiveTrack.
1. On the SD card in the camera;
2. On the SD card and the mobile device.
If you want to cache in the mobile device, please follow these instructions: In the image transmission interface of the Ronin app, tap the Settings icon on the upper left corner, select Shutter, and select Cache or Shoot + Cache. If you choose "Cache," the mobile device will start caching after tapping the shutter, whereas the SD card will not save the photos and videos. If you choose "Shoot + Cache," the mobile device will start caching after tapping the shutter, and the SD card will save the photos and videos as well.
DJI RSC 2 has dual-layer quick-release plates. The DJI R Quick-Release Plate (Lower) is compatible with the Manfrotto 501 standard. The DJI R Quick-Release Plate (Upper) is compatible with Arca-Swiss and Manfrotto equipment, such as tripods and stabilisers. However, not all Arca and Manfrotto quick-release plates can be used on DJI RSC 2.
We suggest using phones of 65-90mm in width. If the phone is narrower than the minimum width, attach a phone case and try again.
The DJI R phone holder is compatible with DJI RSC 2. Only the clamp is compatible with Ronin-S & Ronin-SC, whereas the base mount is not compatible with these two models.
Only the clamp is compatible with DJI RSC 2, whereas the base mount is not compatible.
The third-party motor should be compatible with the 12mm Focus Motor Rod to work with the Ronin Focus Motor.
Connect the RavenEye Image Transmission system to the camera via HDMI cable to use it remotely from the gimbal.
RavenEye internal battery lasts approximately 3.5 hours.
It takes approximately 2.5 hours to charge the RavenEye internal battery fully.
Product Specification
|
Accessory Connections |
NATO port
M4 Mounting Hole
1/4”-20 Mounting Hole
Cold Shoe Mount
Video Transmission/ Follow Focus Motor Port (USB-C)
RSS Camera Control Port (USB-C)
Follow Focus Motor Port (USB-C)
|
|
Battery |
Model: RB2-3400mAh -7.2 V
Type: 18650 2S
Capacity: 3400mAh
Energy: 24.48 Wh
Max Battery Life: 14 hours
Charging time: Approx. 2 hours to fully charge with 18W fast charging (PD and QC 2.0 fast charging protocols are supported)
Charging temperature: 5° to 40° C (41° to 104° F)
|
|
Connections |
Bluetooth 5.0; USB-C |
|
Ronin App Requirements |
iOS 11 or above;
Android 7.0 or above
|
|
Load Weight (Reference Value) |
3.0 kg (Handheld) |
|
Maximum Controlled Rotation Speed |
Pan axis: 360°/s
Tilt axis: 360°/s
Roll axis: 360°/s
|
|
Mechanical Range |
Pan axis: 360° continuous rotation
Roll axis: -240° to +95°
Tilt axis: -112° to +214°
|
|
Operating Frequency |
2.4000-2.4835 GHz |
|
Transmission Power |
|
|
Operating Temperature |
-20° to 45° C (-4° to 113° F) |
|
Weight |
Gimbal: Approx. 1216 g (including the battery and excluding Quick-Release Plate).
Quick-Release Plate (Upper/Lower) Approx. 102 g.
Extended Grip/Tripod (Metal): Approx. 226 g.
Extended Grip/Tripod (Plastic): Approx. 160 g.
|
|
Gimbal Dimensions |
Folded: 260 × 210 × 75 mm (including the handle).
Unfolded: 400 × 185 × 175 mm (including the handle and without the Extended Grip/Tripod).
|
What's in the Box
|
What's Included |
DJI RSC 2 Gimbal |
DJI RSC 2 Pro Combo |
|---|---|---|
|
Gimbal (Built-in battery) |
x 1 |
x 1 |
|
USB-C Charging Cable (40 cm) |
x 1 |
x 1 |
|
Lens Support |
x 1 |
x 1 |
|
Multi-Camera Control Cable (USB-C, 30 cm) |
x 1 |
x 2 |
|
Multi-Camera Control Cable (Sony Multi, 30 cm) |
x 1 |
x 1 |
|
Multi-Camera Control Cable (Micro-USB, 30 cm) |
x 1 |
x 1 |
|
Multi-Camera Control Cable (Mini-USB, 30 cm) |
x 1 |
x 1 |
|
Hook-and-Loop Strap |
x 2 |
x 2 |
|
D-Ring Camera Mounting Screw 1/4"-20 |
x 2 |
x 2 |
|
Screw 1/4"-20 |
x 1 |
x 1 |
|
Quick-Release Plate (Arca-Swiss/Manfrotto) |
x 1 |
x 1 |
|
Camera Riser |
x 1 |
x 1 |
|
Extended Grip/Tripod (Plastic) |
x 1 |
- |
|
Extended Grip/Tripod (Metal) |
- |
x 1 |
|
Carrying Case |
- |
x 1 |
|
Phone Holder |
- |
x 1 |
|
Focus Motor |
- |
x 1 |
|
Focus Motor Rod Mount Kit |
- |
x 1 |
|
Focus Gear Strip |
- |
x 1 |
|
Image Transmitter |
- |
x 1 |
|
Cold Shoe to 1/4''-20 Adapter |
- |
x 1 |
|
USB-C Power Cable (20 cm) |
- |
x 1 |
|
Mini-HDMI to HDMI Cable (20 cm) |
- |
x 1 |
|
Mini-HDMI to Mini-HDMI Cable (20 cm) |
- |
x 1 |
|
Mini-HDMI to Micro-HDMI Cable (20 cm) |
- |
x 1 |
|
M4 Screw (10 mm) |
- |
x 6 |
|
Allen Wrench (3 mm) |
- |
x 1 |
