With the Cendence remote controller, the initial idea was to combine the Inspire 2, Tracktenna, and CrystalSky monitor as a highly-integrated unit. As an essential part of this approach, Cendence offers modular components and controls that realise the full potential of Inspire 2 & Matrice 200 applications.
Includes Cendence Patch Antenna.
To improve overall control efficiency, Cendence provides up to five analogue control channels and over ten customizable buttons. The design of Cendence also offers antenna interchangeability. A high-gain antenna, or DJI’s Tracktenna, can augment the power of DJI Lightbridge technology, significantly increasing overall anti-interference and video downlink quality.
The two knobs on the front panel of the Cendence control the gimbal pitch and yaw. The right and left levers and 'focus adjust knob' tune your flight controller settings and camera in real-time allowing for pulled focus and aperture setting. For rapid camera adjustments, you can customise several shortcut buttons.
Rotate the dials or toggle the right and left levers while holding certain (customisable) buttons to control gimbal roll, shutter speed and ISO amongst other settings.
The CrystalSky monitor mounts to the Cendence remote controller via the Cendence Monitor Mounting Bracket. Cendence's antennas, PCB, mounting bracket, and battery are all detachable, making its hardware upgradeable. Customising the controller for compatibility with future DJI aircraft has never been easier.
The USBA supports connection with other mobile devices. When precision camera control is required, Cendence can connect as either a master or slave controller with the Inspire 2's remote controller or another Cendence remote controller.
SDI and HDMI ports support broadcasting at 1080i50 and 720p60. Connect DJI Focus, Tracktenna, or other compatible accessories via the CAN port. Use Tracktenna to achieve stable and high-bandwidth transmission over long distances at 2.4GHz or 5.8GHz frequency bands. When used with the Inspire 2, Tracktenna can achieve a maximum data transmission speed of 10Mbps within a 2km range, dramatically improving video downlink quality. The USBA port supports connection with other mobile devices.
Cendence uses the same batteries as CrystalSky monitors for enhanced product synergy. If you run out of power, just swap in a charged battery or charge Cendence via the power port.
Practical accessories make using Cendence easy. The Cendence Support Rig takes on part of the controller’s weight, making it easier to hold for long periods of time. Control Stick Covers prevent dust from entering both sticks, ensuring smooth and reliable control. The Interchangeable Mobile Device Holder lets you attach a phone or tablet instead of a CrystalSky monitor.
The DJI Cendence is currently compatible with the Inspire 2 and Matrice 200 aircraft series.
GENERAL
What are the main differences between the DJI Cendence and the Inspire 2 and Matrice 200 remote controllers?
Unlike the Inspire 2 and Matrice 200 controllers, the Cendence has a built-in ultra bright LCD display monitor. A variety of functions in the app can be activated by customizable buttons on the controller. Operation time is longer, and batteries and antennas are interchangeable. The Cendence is better equipped to excel in complex environments and is compatible with DJI’s CrystalSky monitor.
Why does the Cendence have SDI ports?
The standard broadcasting signal can be exported via SDI ports, which enables the Cendence to be used in live broadcasting scenarios.
What are the CAN ports on DJI's Cendence used for?
CAN ports allow Cendence to connect to DJI Focus, Tracktenna, or external GPS modules.
Does the Cendence support dual operator control?
Yes. You can set one master and one slave controller.
Is the LCD display on the Cendence touch screen?
No.
How do I reset the functions of the custom buttons?
You can reset the functions of the custom buttons via the app you are using.
Can Cendence switch between 2.4 GHz and 5.8 GHz frequency bands?
Yes.
Can I refit the Cendence myself?
For now, no. However, DJI plans to make SDR and Wi-Fi expansions available soon.
Can the Cendence use CrystalSky batteries?
Yes.
What do I do if video transmission signal is weak when using the Cendence?
Check if there is any interference in the surrounding area and adjust antenna direction accordingly.
What is the Cendence’s video transmission range?
7km when FCC compliant.
Can I set joystick responsiveness?
Yes.
What are the functions of the LCD display?
The LCD screen displays camera parameters, flight status, remote controller, battery information and more.
Do I need to remove the batteries when charging the Cendence?
No.
Here are the full specs for DJI's customizable Cendence Remote Controller.
Model Type | GL800A |
Operating Frequency | 2.400-2.483 GHz; 5.725-5.825 GHz |
Max Transmitting Distance (unobstructed, free of interference) | 2.4 GHz: 4.3 miles (7 km, FCC); 2.2 miles (3.5 km, CE); 2.5 miles (4 km, SRRC) 5.8 GHz: 4.3 miles (7 km, FCC); 1.2 miles (2 km, CE); 3.1 miles (5 km, SRRC) |
E I R P | 2.4 GHz: 26 dBm (FCC); 17 dBm (CE); 20 dBm (SRRC) 5.8 GHz: 28 dBm (FCC); 14 dBm (CE); 20 dBm (SRRC) |
Power Supply | Intelligent Battery (Type: WB37-4920mAh-7.6V) |
Intelligent Battery | 4923 mAh LiPo |
Charging | DJI charger |
Output Power | 20 W (supplying power to DJI CS550 monitor) 12 W (without supplying power to monitor) |
Video Output Ports | USB, HDMI, SDI |
USB Supply Power | iOS: 1 A, 5.2 V (Max); Android: 1.5 A, 5.2 V (Max) |
Dual User Capability | Host-and-Slave connection |
Operating Temperature | -4 ° to 104 °F (-20 ° to 40 °C) |
Storage Temperature | Less than 3 months: -4 ° to 113 °F (-20 °to 45 °C) More than 3 months: 72 °to 82 °F (22 °to 28 °C) |
Charging Temperature | 32 ° to 104 °F (0 °to 40 °C) |
Charging Time | About 2 hours and 24 minutes (using an 180W charger) |
Supply Power Time | About 4 hours (only Master remote controller function enabled and without supplying power to monitor) |
Weight | 1041 g |
delivery information
FREE UK Delivery for orders over £99
UK Delivery Option
Option | Details |
---|---|
DPD Next Day | Item will be delivered the next working day. |
DPD 10:30am Delivery | Item will be delivered by 10:30am on the next working day. This option costs £12. |
DPD Saturday Delivery | Item will be delivered on the next Saturday. The option costs £15. |
Option | Details |
---|---|
Royal Mail First Class | Item will be delivered the next working day. This option costs £7. |
Option | Details |
---|---|
Collect from Heliguy | Pick up your items from Heliguy HQ, at Unit 9, Jupiter Court, Orion Business Park, North Shields, NE29 7SE. We are open Monday to Friday, 9am to 5pm. This option is free. |
International
We offer a comprehensive shipping service to countries around the world. For more information about costs and length of delivery, please see details on costs and delivery estimates in the checkout when you are buying your item.
Get in touch
Telephone
UK: 0845 838 8652
The team were quick to dispatch my order and very helpful when a problem needed solving. A really positive experience all-around, and I'll certainly consider purchasing products from them again in the future. Thanks team!
January 12,2021
Smooth transaction and a great product
December 23,2020
Excellent and delivery date and time was spot on.
December 3,2020
Excellent and delivery date and time was spot on.
December 3,2020
Excellent prompt service.
November 9,2020
Good advice, genuine products, fast delivery, no worries!
November 9,2020
Great service, quick delivery, grand price!!
November 1,2020
Great deal on the product, delivered the next day securely within the allotted time slot
October 5,2020
Great deal on the product, delivered the next day securely within the allotted time slot
October 5,2020
The best online seller,
Easy purchase process,
5 stars.
October 4,2020
Saturday
9
January
From: Agus Santoso
Happy
Quick and great respon.
Wednesday
6
January
From: Garry Andrew Jones
Happy
Phoned Helliguy today spoke to a gentleman called Ben he was a great help five stars I highly recommend.
Friday
11
December
From: Clint swann
Happy
Very helpful in all the questions I asked thank you. Second drone I will be buying from you guys wouldn’t go anywhere else
Wednesday
2
December
From: Angela Parton
Happy
Quick response, very helpful !
Monday
30
November
From: Tony McGuire
Happy
Great customer service - sorted my first purchase out and Heliguy will have my custom from now on. Thanks Ben
Friday
27
November
From: Simon Buck
Happy
Matthew is a credit to the Heliguy brand - the time and energy he put into helping me with my order was faultless. Please acknowledge this with him. Thanks Matthew - and Michael for the added input along the way.
Friday
27
November
From: Barrie Whittle
Happy
As usual,fantastic friendly help from Matt and all at Heliguy!!
Thursday
26
November
From: Colin
Happy
Thanks for info and getting back to me so quick
Tuesday
24
November
From: Robert Smith
Happy
Thank you for your quick responce and patience
Monday
23
November
From: Angela Parton
Happy
Very helpful