How do I insatll the mounting bracket to my DJI M30?

Follow these steps to install the mounting bracket to your DJI M30:

  1. Mount Bracket A: Secure Bracket A to the aircraft using four M3 screws.

  2. Attach Payload: Use M1.6 and M2.0 screws to attach the PSDK payload to Bracket B.

  3. Lock Bracket B: Slide Bracket B into Bracket A until it clicks into place and connect the payload to the PSDK port.

  4. Verify Installation: Ensure the payload's centre of gravity falls within the orthographic projection area of Bracket A.

  5. Remove Payload: Disconnect the cable, unlock Bracket B from Bracket A using the lock lever, and slide out the payload.