Firmware update for DJI Phantom 4 RTK

Firmware update for DJI Phantom 4 RTK - v01.07.0118

DJI has updated the firmware for the Phantom 4 RTK to improve flight safety and experience - and users should upgrade ASAP.

Last updated: Jul 04, 2022

1 minute read

DJI has updated the firmware for the Phantom 4 RTK to improve flight safety and experience - and users are being encouraged to upgrade as soon as possible.

What’s New?

Improved battery stability and safety after the battery was not fully charged and discharged during long-term storage.

If you have multiple batteries, please run this firmware update on all of them.

Upgrade Method - DJI Assistant 2 for Phantom/MG

Download and install DJI Assistant 2 for Phantom:

https://dl.djicdn.com/downloads/dji_assistant/20181028/Phantom/DJI+Assistant+2+For+Phantom+2.0.6.exe

  1. Connect your aircraft/remote control to your computer
  2. Open DJI Assistant 2 for Phantom
  3. Upgrade the aircraft firmware to V 01.07.0118

Download and install DJI Assistant 2 for MG:

https://dl.djicdn.com/downloads/dji_assistant/20190123/DJI+Assistant+2+For+MG+2.0.12.exe

  1. Connect your aircraft/remote control to your computer
  2. Open DJI Assistant 2 for MG
  3. Upgrade the aircraft firmware to V 01.07.0118

Firmware update 'may take a long time'

  • DJI has said that this firmware update may take a long time. Please wait and DO NOT power off the aircraft during updating.
  • Make sure that the firmware for both the aircraft and remote controller is up-to-date. Otherwise they will not work together.
  • It is not recommended to use this firmware with a PC GS Pro of v1.2.0 or lower. Otherwise some functions may not work properly.
  • To ensure you have a positive flying experience, maintain your batteries regularly to extend battery life and ensure flight safety.
  • Discharge the battery to 50-90% (2-3 grids of indicator lights) if it has not been used for seven days or more. Before using the discharged battery, charge the battery fully to ensure flight safety. It is easiest to use the Phantom 4 Charging Hub. When using the Charging Hub, discharge the battery for at least two hours in Storage Mode and then charge the battery in Charging Mode to 100%.
  • The battery should be preheated in an air-conditioned car before being used in a cold environment.

The DJI Phantom 4 RTK

The DJI Phantom 4 RTK was launched in the autumn and is a high-class mapping and surveying drone, offering centimetre-level positioning data in real-time.


Leave a comment

Please note, comments must be approved before they are published

If you have a question or require urgent assistance, please contact us to ensure your query is dealt with quickly.

Please note, this hidden field is to prevent bot submissions and entering data will result in your comment being discarded without moderation.