The Waterproof case can help you shoot beautiful pictures at a depth of 60 meters with DJI Osmo Pocket.
There are two buttons on the outside for easier operation.
Follow the steps below to install your waterproof case together.
Enable the Waterproof Case mode on the Osmo Pocket by swiping down on the touch screen, then swiping left until you reach the Waterproof Case Mode and tapping the screen to activate this mode.
Then tap the "Power Off" option on the screen to turn off your Osmo Pocket.
Remove the smartphone adapter from your Osmo Pocket.
Unscrew the Securing Ring and remove the clamp on the Waterproof case.
Place the Osmo Pocket into the waterproof case.
Attach the anti-fog insert to the waterproof case.
Use the Clamp to secure Osmo Pocket and tighten the Securing Ring.
Make sure the securing Ring is completely tightened to stop any water entering the case.
Now you can start shooting an underwater video!
*Clean the waterproof case after use!
If you have any question when you use Osmo Water Proof Case, please contact Heliguy 0191 296 1024 or you can find more information on oHelp Page.