Updating the DJI Cendence Firmware

In this post, we will look at how to update your DJI Cendence remote controller via the DJI Go 4 app. Before updating the remote ensure your screen/monitor is charged and the DJI Cendence remote is above 50% charge.  

1. Power on the remote and attach crystal sky to the remote controller.

2. Launch DJI Go 4 on your device 3. Click the red bar at the top of the screen that reads "Update Firmware" and then clicks "Download Now" 4. Once your update is complete and the pop up has appeared then turn your remote off and back on again. Your controller should now be updated. If the update bar is still appearing, repeat the process.