The H20 and H20T User Interface is simple and has all the features you need to conduct your workflow smoothly.
The Zenmuse H20 and H20T are IP44-rated multi-sensor cameras which ensure mission efficiency for a range of commercial drone applications.
Whatever your drone application, it's best to learn the basics before conducting your mission.
In this quick and easy Heliguy™ tutorial you'll learn the Zenmuse H20 and H20T User Interface basics.
- Enter DJI Pilot App
- Switch Between Wide Angle, Inferred and Zoom Modes
You have the option to switch between camera modes when using the H20 or H20T. Switch to the Wide Angle camera mode to start.
Now switch to the Inferred camera mode. It's a good idea to get acquainted with what all the colours mean prior to conducting your mission.
Switch to the Zoom camera mode. Take advantage of the powerful zoom the H20 offers you and explore the landscape. All modes can be switched using the same onscreen button.
- Double Tap the Screen to Focus
Double tap the screen to focus the camera on a specific object. Before taking pictures or videos it's important the camera is in focus. If the camera isn't in focus you'll end up with a blurry image which can make data collection hard.
- Use Zoom Slider to Adjust Zoom Magnification
Whilst in Zoom mode you can use the dial at the right hand side of the User Interface to zoom in and out.
- Tap Screen Once for Metering or Focusing
When you tap the User Interface you can Focus or alter Metering.
There are a lot of amazing features to try out on the Zenmuse H20 or H20T User Interface, so be sure to explore all the icons.
If you need extra support or direct advice give us a call or email us. Our expert drone team is here to make your drone journey go as smoothly as possible.
Leave a comment