Question 1

What is the UPS mode of DJI Power 1000 V2? How do I use it?

Accepted Answer

UPS, short for Uninterruptible Power Supply, is mainly used to supply power to devices through the DJI Power 1000 V2 when there is a power outage and prevent accidents that might otherwise be caused. When electrical devices are connected to the powered-on, Power 1000 V2 and both are receiving grid power, press the AC button on the power station and ensure that the AC output indicator shows solid light, then the Power 1000 V2 defaults to UPS mode. The Power 1000 V2 can start powering the connected devices within 0.01 seconds*. You can decide whether to use this mode based on the device(s) you are using. * Data was tested in a controlled laboratory environment.

Question 2

How do I update the firmware of DJI Power 1000 V2？

Accepted Answer

You can update the firmware through DJI Home app and DJI Assistant 2. DJI Home app: After connecting the DJI Power 1000 V2 to the app and configuring the Wi-Fi network, go to Settings Firmware Update to upgrade to the latest firmware version. DJI Assistant 2: Refer to the Firmware Update section in the user manual. Before the update, install DJI Assistant 2 (Power Series) on your computer.

Question 3

How should I maintain DJI Power 1000 V2 and optimise its life span?

Accepted Answer

To protect the battery and ensure long-term performance: Avoid storing the power station when fully discharged, as this can cause over-discharge and irreparable damage to the battery cells. For long-term storage, charge it to 100%, then discharge it to around 60%. Avoid keeping it at a high or low charge level for extended periods, as both can accelerate battery ageing. Every four months, perform a maintenance cycle: discharge the unit to 15%, switch it off, leave it for at least two hours, then recharge it to 100% using Standard Recharge Mode.

Question 4

What should I do if an error code appears on the DJI Power 1000 V2?

Accepted Answer

If an error code appears on the power station display, you can connect to the DJI Home app to check the specific issue and solution, or visit the DJI Power Series Product Support Page.

Question 5

What recharging methods does DJI Power 1000 V2 support?

Accepted Answer

You can recharge the DJI Power 1000 V2 using either AC mains or a variety of DC power sources. AC Power: Recharge using mains electricity via the AC input port. DC Power: You can also recharge using DC power in the following ways: Car power only – Use the DJI Power 1kW Super Fast Car Charger, drawing power from the car’s alternator. Car and solar power – Use the DJI Power 1.8kW Solar/Car Super Fast Charger to combine solar and car charging.

Question 6

How do I enable AC power output on the DJI Power 1000 V2? How many modes are there?

Accepted Answer

After turning on the power, you can press the AC button to enable AC output, or you can enable it remotely in the DJI Home app. If you press the AC button once, its indicator will blink slowly. AC output will automatically shut down to save electricity if the power station is not charging any device via the AC output ports within half an hour. If you press and hold the AC button, its indicator will show solid light, and AC output will not automatically shut down.

Question 7

How can I change the frequency of AC power output on the DJI Power 1000 V2?

Accepted Answer

You can do either of the following: 1. When being recharged with AC input power at different frequencies, the power station will automatically switch to the same frequency as the input power. 2. To manually switch, press and hold the AC button for 10 seconds until the frequency changes on the screen.

Question 8

How can I achieve the maximum output power with my DJI Power 1000 V2 when supplying power through the USB-C port?

Accepted Answer

The USB-C port supports a maximum output of 140 W. The connected device must support the PD 3.1 protocol and be used with a USB cable that complies with the USB EPR. Taking a 16-inch MacBook Pro as an example, if you use a regular USB-C charging cable, the maximum power transmission is only 100 W. It can only reach 140 W when using the standard magnetic cable.

Question 9

What considerations should be taken when using the DJI Power 1000 V2 in low-temperature environments?

Accepted Answer

The power supply capability will be affected in low-temperature environments, and the output power will decrease.

Question 10

How long does it take for DJI Power 1000 V2 to turn off if it is not supplying power?

Accepted Answer

You can set the auto-off time in the DJI Home app. If there is no continuous output, it will automatically turn off after 30 minutes by default.

Question 11

What functions are supported on the DJI Power 1000 V2 with SDC ports? What are the differences between the SDC port and the SDC Lite port?

Accepted Answer

The SDC port is capable of the following functions: Recharging, capacity expansion, and power supply. Recharging Options: Use the DJI Power 1kW Super Fast Car Charger to recharge via car power (up to 1000W). Recharge with solar (up to 1800W) or combine solar (1200W) and car power (600W) using the DJI Power 1.8kW Solar/Car Super Fast Charger. Recharge via solar (up to 400W) using the DJI Power Solar Panel Adapter Module (MPPT). Use a car's power outlet with the DJI Power Car Power Outlet to SDC Power Cable (12V/24V). Capacity Expansion: Connect up to five DJI Power Expansion Battery 2000 units to increase total capacity to 11,264 Wh. Power Supply Functions: Fast-charge DJI drone batteries, including the Matrice 4 Series, Mavic 3 Series, Air 3, Matrice 30, and Inspire 3, using the correct fast-charge cable. Power car appliances using the DJI Power SDC to Car Charger Plug Power Cable. Charge model aircraft batteries outdoors using the DJI Power SDC to XT60 Power Cable (12V) and a balance charger. The SDC Lite port is designed for low power applications and does not support the expansion battery, DJI Power 1.8kW Solar/Car Super Fast Charger or DJI Power 1kW Super Fast Car Charger.

Question 12

Does the DJI Power 1000 V2 support DJI Power Dongle？

Accepted Answer

No, it does not. The DJI Power 1000 V2 has a built-in wireless module and can connect directly to Wi-Fi and the DJI Home app.

Question 13

What should be noted when using the DJI Power SDC fast charging function for DJI drones with my DJI Power 1000 V2?

Accepted Answer

After the flight, wait until the drone battery has cooled down before connecting it to the corresponding DJI Power SDC fast charging cable; otherwise, charging speed may be affected. Since the final 5% of charging a drone battery (from 95% to 100%) is completed via trickle charging, the charging speed is relatively slower. You can consider using the battery after it is charged to 95%, as the operating time will not be significantly less than it is when fully charged.

DJI Power 1000 V2

50-days return policy

Next-day delivery - order before 3 pm

Overview

Contents

Specifications

Support

FAQ

1024Wh portable power station with advanced safety features

Upgraded design ensures safe, reliable performance—even at high temperatures

High-capacity unit with dual ports

Fast-charge drones, devices, and appliances whenever and wherever you need

Flexible, fast recharging options

Stay powered with grid, solar, or car charging

Upgraded safety and intelligent Protection

Comprehensive safety features for worry-free use in any environment

Extensive accessory compatibility

Tailor your power setup with a full suite of versatile, purpose-built add-ons

DJI Power 1000 V2: Recommended Extras

Complete your purchase with...

DJI Power Expansion Battery 2000

DJI Power Expansion Battery 2000 Mounting Kit

DJI Power 1000 Protective Storage Bag

Accreditation