Rental DJI Zenmuse L3

1535nm long-range LiDAR,

Vertical accuracy: Better than 3cm at 120m altitude, better than 5cm at 300m altitude, and 10cm at 500m altitude.

Laser beam divergence of 0.25 mrad (1/e²): Spot size one-fifth of Zenmuse L2, for detection of smaller objects.

Extended range up to 950 m under 100 kHz scanning frequency.

Adjustable scanning rates (100–2000 kHz) for flexible mission demands.

Up to 16 returns for enhanced penetration through dense vegetation.

Typical working altitude: 300–500m (supports 1:500–1:1000 mapping scale). Discuss UK SORA applications with our in-house regulatory specialists to explore flying higher than 120m.

Penetrates vegetation and captures complex terrain with minimal noise.

Two 4/3 CMOS 100MP cameras with mechanical shutter.

Pixel binning supports an effective 25MP resolution with large pixel size, supporting superior colour resolution, even in low-light environments.

Achieves a 3cm GSD at 300m altitude.

Real-time position synchronisation enables GCP-free operation.

Fastest continuous capture: 0.5 s (25 MP) / 1.2 s (100 MP).

Ultra-wide 107° horizontal FOV captures extensive ground coverage per flight.

Produce LiDAR point clouds and orthophotos in a single mission.

RGB camera enables the creation of true-colour point clouds.

Point cloud result preview: DJI Pilot 2 automatically recommends parameters based on user-defined routes and generates a Density Profile Chart and point cloud distribution.

Power Line Follow: Supports operations up to 130m. Complete electrical corridor data acquisition in a single straight flight in most scenarios.

Flexible split-screen view: View two data sources simultaneously - point cloud, RGB, or Vision Assist. During Power Line Follow or when RGB cameras face downward, Vision Assist provides real-time forward-facing visuals.

Real-time point cloud: Real-time point cloud SLAM reconstruction with instant 2D and 3D point cloud previews. Monitor progress and take measurements as data is being collected. Sync point clouds instantly to the cloud via DJI FlightHub 2.

Cloud-based point cloud measurement: Point clouds are compatible with DJI FlightHub 2. View and manage point cloud data, generate flight routes, annotate, and conduct measurements - all via the cloud.

High-resolution terrain mapping and contour generation.

Urban and rural 3D modelling with exceptional structure clarity.

Forestry canopy analysis and vegetation penetration.

Construction and utility infrastructure surveys.

Suitable for power line, transport, and environmental monitoring projects.

Rapid 3D scene reconstruction for emergency response, accident investigation, and disaster management — delivering actionable intelligence from the air.