How does automated power line inspection work on the DJI Matrice 5T?

The DJI Matrice 5T's top-mounted LiDAR detects and tracks conductors and ground wires, so the aircraft can fly sideways along the line automatically, following its sag. No pre-built 3D model or high-accuracy route is needed.

  • Supported lines: single-, twin-, quad-, hexa- and octo-bundled conductors, plus ground wires, with an inclination of less than 40° (in windless conditions).

  • RTK: not required, but recommended if you need photo POS data to locate defects in post-processing.

  • Obstacles: if the aircraft meets an obstacle such as a tree near the line, it brakes and hovers. Fly over it manually, capture the missed section, then resume.

  • Photos: the feature saves images from the zoom camera, and you can adjust the gimbal pitch during the inspection.

For best results, inspect on clear, well-lit days. Inter-phase (centre phase) inspection is not recommended.