If the DJI Matrice 4 series aircraft is powered on without unfolding, the gimbal will not be able to complete the self-check. Will this damage the gimbal?

It will not damage the gimbal. It is recommended to power on the aircraft after unfolding the arms to avoid collisions between the gimbal and the arms during the self-check.

Related Questions

What precautions should be taken when using the top-mounted rotating LiDAR on DJI Matrice 400 aircraft？

Always install the protective cover on the rotating LiDAR when it is not in use. If the dome becomes...

What precaution should be taken when using Zenmuse S1?

Fog may occur in humidity—store dry. Avoid scratching lens, use soft cloth to clean, no cleaners.

What precaution should be taken when using Zenmuse V1?

With H20/H30 at 35x+, reduce speaker volume or tilt gimbal below -60° to avoid shake.