What precautions should be taken when installing DJI Matrice 4D Series' Obstacle Sensing Module?
Follow these precautions to ensure proper installation and operation:
Secure Installation – Tighten the screws and ensure the interface is properly sealed. If using with DJI Dock, use the included hex key to tighten the screws again.
LiDAR Positioning Label – When using with DJI Dock, correctly attach the LiDAR positioning label on the dock cover as instructed in the manual.
Pre-Installation Requirement – Install the Obstacle Sensing Module accessories before turning on the aircraft. Do not install accessories while the aircraft is powered on.
Activation & Updates – After installation, connect to the internet and activate the Obstacle Sensing Module as prompted. If a firmware update is required, update to the latest version promptly.
Related Questions
Do the DJI Matrice 5T, Matrice 4T, or Matrice 4TD have LiDAR obstacle sensing?
The Matrice 5T has both built in. DJI Matrice 4T and 4TD do not have this as standard, but LiDAR and mmWave radar can be added with the DJI Matrice 4 Obstacle Sensing Module.
What does the DJI Matrice 5T sensing system consist of?
The DJI Matrice 5T combines fisheye vision, a rotating LiDAR, three-directional mmWave radar and a downward ToF sensor.
Can the DJI Matrice 5T detect power lines?
Yes. The DJI Matrice 5T senses transmission lines at up to 21 m/s and distribution lines at up to 15 m/s.