DJI Mavic 3: RC Linking Instructions
This step-by-step guide, ensures a quick and successful connection before your flight.
Follow a step-by-step guide to link your DJI Mavic 3 to the remote controller.
Ensure a stable connection between the aircraft and controller before flight.
Learn how to use the DJI Fly app to initiate the linking process.
Recognise the beeping sounds and LED indicators that confirm successful linking.
Understand how to troubleshoot common linking issues.
Get your DJI Mavic 3 ready for flight in just a few simple steps.
Linking your DJI Mavic 3 to the remote controller is essential before flying. Follow these step-by-step instructions to ensure a successful connection.
Instructions
Power on the Devices: Turn on the aircraft and the remote controller.
Connect Your Mobile Device: Use a USB cable to connect your mobile device to the remote controller, and open the DJI Fly app on your device.
Access the Connection Guide: A connection guide prompt will appear in the lower right corner of the screen. Tap the connection guide and follow the on-screen instructions.
Prepare for Linking: The remote controller will start beeping, and the battery LED indicators will blink in sequence, indicating that the controller is ready for linking.
Initiate Linking on the Aircraft: Press and hold the aircraft power button for approximately four seconds. Release the button after hearing one long beep, followed by two short beeps. The battery LEDs will blink, confirming the linking process has started.
Confirm Successful Linking: Once linking is complete, the remote controller will stop beeping, the LED indicators on both devices will stop blinking and become solid, and the camera view will appear on the DJI Fly app screen.
Your DJI Mavic 3 is now successfully linked to the remote controller and ready for use.
Summary
Successfully linking your DJI Mavic 3 to the remote controller ensures a seamless flying experience. By following these steps, you can establish a stable connection and prepare your drone for flight in just a few minutes.
If you encounter any issues during the process, check the LED indicators and beeping signals to diagnose the problem. For further assistance, contact heliguy™ for expert support.