Mounting the Propeller Guards - DJI Mavic Air

Properly mounting propeller guards on your DJI Mavic Air helps protect both the aircraft and its surroundings during flight. This guide provides a step-by-step process to securely attach the guards before takeoff.

Ensure the drone is unfolded and you have all four propeller guards ready before starting.

Instructions

1. Open the clamps on the propeller guards

2. Match the propellers together: LF and LR go together, and RF with RR. Ensure they are attached together firmly.

3. Ensure that the LF/RF propeller goes onto the front of the drone as it has a cut out to fit around the landing leg. Ensure they are on the right way round.

4. Close the clamps on the prop guards

5. Ensure the prop guards are connected to the drone firmly and that the connections are not loose. Before moving the drone about heliguy™ recommends hovering for 10 seconds to ensure everything is ok.

Next steps

Mounting propeller guards correctly ensures safer flights and reduces the risk of damage to the drone or surroundings. Always double-check that the guards are secure before taking off.

If you need further assistance, contact heliguy™ for expert support.