How should the DJI Dock be installed and configured?


The DJI Dock should be installed and configured by following this method:

  1. Fix DJI Dock on a flat, level surface;
  2. Connect the power cables to DJI Dock.
  3. After it is fixed, connect DJI Dock to the network using a network cable or install DJI Cellular Module;
  4. Quickly configure DJI Dock using the DJI RC Plus remote controller (RC).


Sources

This answer was generated from information sourced from the following pages:


heliguy™ Knowledge Base

Learn everything from basic drone terminology to advanced UAS concepts and best practices.


Ask a Question