What precautions should be taken when installing the DJI AP1 Parachute?
The following precautions should be taken when installing the DJI AP1 Parachute:
Install the parachute on top of the aircraft using the Matrice 5TD accessory mount, and make sure the mounting screws are securely tightened.
Do not connect or disconnect the parachute while the aircraft is powered on. Install the parachute before powering on the aircraft. Do not install the parachute while the aircraft is powered on.
Make sure the plug is securely inserted. Do not pull the cable with excessive force, as this may compromise water resistance or cause damage.
Tighten the connector screws properly. Do not overtighten them, as this may cause damage.
After installation, connect to the internet and follow the prompts to activate the parachute. If prompted to update the firmware, update it promptly to the latest version.