Full Description
DJI Matrice 200 Quadcopter - The Waterproof Enterprise Platform
The new Matrice 200 is a fantastic addition to any commercial operator's toolkit. The water resistant shell, FPV camera, and wide array of Zenmuse camera support make it a versatile quadcopter for enterprise use. Heliguy are a DJI enterprise dealer trained in repairing the Matrice 200 systems.
Matrice 200 FPV Camera
The Matrice 200 includes an FPV camera which will allow operators to keep an eye on the direction of their quadcopter at all times.
It will also allow a second operator to have full control over the camera used with the platform.
Multiple Camera Support
The DJI Matrice 200 features support for a range of cameras.
This flexibility allows you to use the Z30, X4S, X5S or Thermal XT (Thermal XTs purchased before April 2017 need a dealer update before being mounted to M200 call 0191 296 1024 for more details) with the M200, making data collection a breeze with one drone.
Dual Battery System
The Matrice 200 features a dual battery system to provide redundancy while in flight.
Supported batteries include the TB50 and High Capacity TB55.
The higher capacity TB55 will give the Matrice 200 a longer flight time, whatever camera setup is being used.
Built for Inspection
The Matrice 200 is DJI's best drone for inspections to date.
The range of supported cameras, the addition of FPV and the flight time all make this the best quadcopter on the market for inspections.
Matrice 200 V2 Aircraft Specifications
|
Dimensions |
Unfolded: 883×886×398 mm |
|
Diagonal Wheelbase |
643 mm |
|
Weight |
Approx. 4.69 kg (with two TB55 batteries) |
|
Max Takeoff Weight |
6.14 kg |
|
Max Payload |
1.45 kg |
|
Operating Frequency |
2.4000-2.4835 GHz; |
|
EIRP |
2.4 GHz: ≤ 26 dBm (NCC/FCC); ≤ 20 dBm (CE/MIC); ≤ 20 dBm (SRRC)
5.8 GHz: ≤ 26 dBm (NCC/FCC); ≤ 14 dBm (CE); ≤ 26 dBm (SRRC)
|
|
Hovering Accuracy (P-mode with GPS) |
Vertical:±1.64 feet (±0.5 m) or ±0.33 feet(±0.1 m, Downward Vision System enabled)
Horizontal:±4.92 feet (±1.5 m) or ±0.98 feet (±0.3 m, Downward Vision System enabled)
|
|
Max Angular Velocity |
Pitch: 300°/s, Yaw: 120°/s |
|
Max Pitch Angle |
S-mode: 35°; |
|
Max Ascent Speed |
16.4 ft/s (5 m/s) |
|
Max Descent Speed (vertical) |
9.8 ft/s (3 m/s) |
|
Max Speed |
S-mode/A-mode 81 kph (50.3 mph);
P-mode: 61.2 kph (38 mph)
|
|
Max Service Ceiling Above Sea Level |
9842 feet (3000 m, with 1760S propellers) |
|
Max Wind Resistance |
39.4 ft/s (12 m/s) |
|
Max Flight Time (with two TB55 batteries) |
38 min (no payload), |
|
Supported DJI Gimbals |
Zenmuse X4S/X5S/X7/XT/XT2/Z30 |
|
Supported Gimbal Mounting |
Single Gimbal, Downward |
|
Ingress Protection Rating |
IP43 |
|
GNSS |
GPS+GLONASS |
|
Operating Temperature |
-4° to 122° F (-20° to 50° C) |
Matrice 200 V2 Remote Controller Specs (Cendence S)
|
Operating Frequency |
2.4000-2.4835 GHz; |
|
Max Transmitting Distance |
NCC/FCC: 5 mi (8 km); |
|
EIRP |
2.4 GHz: ≤ 26 dBm (NCC/FCC); ≤ 20 dBm (CE/MIC); ≤ 20 dBm (SRRC)
5.8 GHz: ≤ 26 dBm (NCC/FCC); ≤ 14 dBm (CE); ≤ 26 dBm (SRRC)
|
|
Power Supply |
Extended Intelligent Battery (Model: WB37-4920mAh-7.6V) |
|
Output Power (max) |
13 W (Without supplying power to monitor) |
|
USB Power Supply |
1 A⎓ 5.2 V (max) |
|
Operating Temperature |
-4° to 122° F (-20° to 50° C)
|
Matrice 200 V2 Downward Vision System Specs
|
Velocity Range |
< 32.8 ft/s (10 m/s) at the height of 6.56 feet (2 m) |
|
Altitude Range |
< 32.8 feet (10 m) |
|
Operating Range |
< 32.8 feet (10 m)
|
|
Operating Environment |
Surfaces with clear patterns and adequate lighting (> 15 lux) |
|
Ultrasonic Sensor Operating Range |
0.33-16.4 feet (0.1-5 m) |
|
Ultrasonic Sensor Operating Environment |
Non-absorbing material, rigid surface (thick indoor carpeting will reduce performance) |
Matrice 200 V2 Forward Vision System Specs
|
Obstacle Sensing Range |
2.3-98.4 feet (0.7-30 m) |
|
FOV |
Horizontal 60°; |
|
Operating Environment |
Surfaces with clear patterns and adequate lighting (> 15 lux)
|
Matrice 200 V2 Upward Infrared Sensing System Specs
|
Obstacle Sensing Range |
0-16.4 feet (0-5 m) |
|
FOV |
±5° |
|
Operating Environment |
Large, diffuse and reflective obstacles (reflectivity >10%)
|
Matrice 200 V2 Battery Specs
|
Capacity |
7660 mAh |
|
Voltage |
22.8 V |
|
Battery Type |
LiPo 6S
|
|
Energy |
174.6 Wh |
|
Net Weight (Single One) |
Approx. 885 g |
|
Operating Temperature |
-4° to 122° F (-20° to 50° C) |
|
Charging Temperature |
41° to 104° F (5° to 40° C)
|
|
Max Charging Power |
180 W
|
Matrice 200 V2 Battery Charger Specs
|
Voltage |
26.1 V |
|
Rated Power |
180 W
|
Matrice 200 V2 Charging Hub Specs
|
Input Voltage |
26.1 V |
|
Input Current |
6.9 A
|
|
Item |
Quantity |
|---|---|
|
Matrice 200 V2 Aircraft Body |
1 |
|
Single Downward Gimbal Connector |
1 |
|
Cendence-S Remote Controller |
1 |
|
Landing Gear |
2 |
|
Propeller Pairs |
4 |
|
TB55 Flight Battery |
2 |
|
Battery Charger |
1 |
|
Battery Charging Hub |
1 |
|
Power Cable |
1 |
|
USB A to A Cable |
1 |
|
Mobile Device Holder |
1 |
|
Remote Control Battery WB37 |
1 |
|
CrystalSky Mounting Bracket |
1 |
|
USB Extension Cable |
1 |
|
Remote Controller Strap |
1 |
|
64GB Micro SD Card |
1 |
|
Carrying Case |
1 |
|
Screwdriver Set |
1 |
|
Gimbal Damper |
3 |
|
Cendence Control Stick Covers |
1 |
|
Cendence Control Stick Cover Mounting Key |
1 |
|
CrystalSky Mounting Screw |
2 |
|
Rear Port Cover Screw |
6 |
Drone Laws, Licences and Training Requirements
Until 31 December 2020
Where Can I Fly?
Drone pilots should follow the Drone Code, or permissions granted by their PfCO/standard permission.
Do I need to register my drone in the UK?
Yes. See the Drone and Model Aircraft Registration and Education Service page for more details.
After December 31 2020 (Transitional Period)
Where Can I Fly?
There can be no uninvolved people present within the area of flight; and there can be no flight within 150m horizontally of residential, commercial, industrial, or recreational areas (A3 subcategory of Open category).
Want more freedom? Complete a GVC (General VLOS Certificate).
How Do I Get a GVC?
Sit a GVC course with Heliguy. The GVC consists of a theoretical syllabus, followed by a multiple-choice examination.
Following completion of the course, candidates are required to produce an Operations Manual embracing the applicable Pre-Defined Risk Assessments (PDRA) and/or Standard Scenarios (STS).and will undergo a practical flight assessment with a flight examiner. Following completion, candidates will receive a recommendation for the issue of the GVC and can apply to operate under standard permissions. The GVC course is currently being run online through Heliguy Learning Management System.
Do I need to register my drone?
Yes. See the Drone and Model Aircraft Registration and Education Service page for more details.
What Happens If I Have a PfCO?
Holders of a standard permission valid beyond December 31 2020 can operate under the terms of the permission, until their renewal date. Then apply to fly under an Operational Authorisation (replacing the PfCO).
From January 2023 (End of Transitional Period)
The rules will change for DJI aircraft in their current form. Updated information released nearer the time.
Product Specification
DJI Matrice 200 Quadcopter Specifications
Here is everything you need to know about DJI's latest addition to their enterprise product range.
AIRCRAFT
Model |
Matrice 200 |
Package Dimensions |
31.1×15.4×11.4inch (790×390×290mm) |
Dimensions (unfolded) |
28.2×8.7×9.3 inch (716×220×236 mm) |
Dimensions (folded) |
34.9×34.6×14.9 inch (887×880×378 mm) |
Folding Method |
Folded Inward |
Diagonal Wheelbase |
25.3 inch (643 mm) |
Number of Batteries |
Two (TB50s or TB55s) |
Weight (TB50) |
Approx. 3.80 kg |
Weight (TB55) |
Approx. 4.53 kg |
Max Takeoff Weight |
6.14KG |
Max Payload (2 TB50) |
Approx.2.34kg (with two standard batteries ) |
Max Payload (2 TB55) |
Approx.1.61kg (with two standard batteries ) |
Hovering Accuracy (P-mode with GPS) |
Vertical: ±1.64 feet (0.5m) or ±0.33 feet (0.1m, Downward Vision System enabled) Horizontal: ±4.92 feet (1.5m) or ±0.98 feet (0.3m.Downward Vision System enabled) |
Max Angular Velocity |
Pitch: 300° /s；Yaw: 150° /s |
Max Pitch Angle |
P Mode: 35°（Forward Vision System enabled: 25°）； A Mode: 35°；S Mode: 35° |
Max Ascent Speed |
16.4 ft/s (5 m/s) |
Max Descent Speed |
Vertical: 9.8 ft/s (3 m/s) |
Max Speed |
S Mode 23m/s P Mode 17m/s A Mode 23m/s |
Max Service Ceiling Above Sea Level |
1.55 mi (2500 m) |
Max Wind Resistance |
12 m/s |
Max Flight Time(No Payload, with TB50) |
27min |
Max Flight Time(No Payload, with TB55) |
38min |
Max Flight Time(Full Payload, with TB50) |
13min |
Max Flight Time(Full Payload, with TB55) |
24min |
Motor Model |
DJI 3515 |
Propeller Model |
1760S |
Retractable Landing Gear |
Standard |
Operating Temperature |
-4° to 113° F (-20° to 45° C) |
IP Rating |
IP 43 |
GIMBAL INSTALLATION
Downward Gimbal Mount |
Supported |
Upward Gimbal Mount |
Not Supported |
Downward Dual Gimbal |
Not Supported |
BATTERY (STANDARD)
Model |
DJI TB50 |
Capacity |
4280 mAh |
Voltage |
22.8V |
Battery Type |
LiPo 6S |
Energy |
97.58 Wh |
Net Weight |
Approx. 520g |
Operating Temperature |
-4° to 113° F (-20° to 45° C) |
Storage Temperature |
Less than 3 months: -4° to 113° F (-20° to 45° C) More than 3 months: 72° to 82° F (22° to 28° C) |
Charging Temperature |
41° to 104° F (5° to 40° C) |
Max Charging Power |
180 W |
CHARGER
Model |
IN2C180 |
Voltage |
26.1 V |
Rated Power |
180 W |
FORWARD VISION SYSTEM
Obstacle Sensing Range |
2.3-98.4 feet (0.7-30 m) |
Field Of View |
Horizontal 60°，Vertical 54° |
Operating Environment |
Surfaces with clear patterns and adequate lighting (> 15 lux) |
DOWNWARD VISION SYSTEM
Velocity Range |
<32.8 ft/s (10 m/s) at the height of 6.56 feet (2 m) |
Altitude Range |
<32.8 feet (10 m) |
Operating Range |
<32.8 feet (10 m) |
Operating Environment |
Surfaces with clear patterns and adequate lighting (> 15 lux) |
Ultrasonic Sensor Operating Range |
0.33-16.4 feet (10-500 cm) |
Ultrasonic Sensor Operating Environment |
Non-absorbing material, rigid surface (thick indoor carpeting will reduce performance) |
GIMBAL
Compatible Gimbals |
Zenmuse X4S Zenmuse X5S Zenmuse Z30 Zenmuse XT |
REMOTE CONTROLLER
Model |
GL6D10A |
Operating Frequency |
2.400-2.483 GHz 5.725-5.850 GHz |
Max Transmitting Distance(unobstructed, free of interference) |
2.4 GHz: 4.3 miles (7 km, FCC); 2.2 miles (3.5 km, CE); 2.5 miles (4 km, SRRC) 5.8 GHz: 4.3 miles (7 km, FCC); 1.2 miles (2 km, CE); 3.1 miles (5 km, SRRC) |
.EIRP |
2.4 GHz: 26 dBm (FCC); 17 dBm (CE); 20 dBm (SRRC) 5.8 GHz: 28 dBm (FCC); 14 dBm (CE); 20 dBm (SRRC) |
Video Output Ports |
USB, HDMI |
Power Supply |
Built-in battery |
Charging |
DJI charger |
Dual User Capability |
Host-and-Slave connection |
Mobile Device Holder |
Tablet or Smart Phone |
Max Mobile Device Width |
170 mm |
Output Power |
9 W (Without supplying power to smart device) |
Operating Temperature |
-4° to 104° F (-20° to 40° C) |
Storage Temperature |
Less than 3 months: -4° to 113° F (-20° to 45° C) More than 3 months: 72° to 82° F (22° to 28° C) |
Charging Temperature |
32° to 104° F (0° to 40° C) |
Battery |
6000mAh 2S LiPo |
USB Supply Power |
iOS: 1 A @ 5.2 V (Max); Android: 1.5 A @ 5.2 V (Max) |
BATTERY (OPTIONAL)
Model |
DJI TB55 |
Capacity |
7660 mAh |
Voltage |
22.8V |
Battery Type |
LiPo 6S |
Energy |
176.93Wh |
Net Weight |
Approx. 885g |
Operating Temperature |
-4° to 113° F (-20° to 45° C) |
Storage Temperature |
Less than 3 months: -20° C to 45° C More than 3 months: 22° C to 28° C |
Charging Temperature |
41° to 104° F (5° to 40° C) |
Max Charging Power |
180 W |
UPWARD INFRARED SENSOR
Obstacle Sensing Range |
0-16.4 feet (0-5 m) |
Field Of View |
± 5 ° |
Operating Environment |
Large-sized object with diffuse reflecting surface or high reflective rate (>10%） |
