Autumn
Sale
Help & Advice
DJI M300 RTK Industry Bundles
Let us pick the perfect package of drones, sensors, training and accessories for your use-case.
Inspection Bundle
Everything you need for accurate and efficient drone inspections with Matrice 300.
Photogrammetry Bundle
Everything you need for Photogrammetry Surveying using the Matrice 300 RTK.
Public Safety Bundle
The ultimate package of training, equipment and support for public safety organisations.
Full Description
DJI M300 RTK
A New Standard for the Commercial Drone Industry
DJI Matrice 300 RTK
DJI has launched the M300 RTK - a next-level commercial drone platform which offers enhanced flight performance and unrivalled safety features.
With a 55 minute maximum flight time, advanced AI capabilities, six directional sensing and positioning and the ability to carry three payloads - including hybrid camera solutions designed especially for the platform - this IP45-rated drone sets a new standard, combining intelligence with reliability.
The M300 RTK comes with free DJI Enterprise Shield (DJI Care Enterprise) - Basic to give operators peace of mind when conducting commercial missions. The protection package includes two replacements for a minimal replacement fee.
Key Features
- 15km Max Transmission
- 55 minute maximum flight time
- Six directional sensing and positioning
- IP45 Rating
- Primary Flight Display
- -20C to 50°C Operating temperature
- Hot-swappable battery
- UAV Health Management System
- Advanced Dual Control
- Compatible with multiple first-class payloads, including the H20T (quad-sensor with zoom, thermal, wide angle and laser rangefinder capabilities); the P1 full-frame 45MP photogrammetry camera; and the L1 LiDAR sensor.
Enhanced Flight Performance
Enhanced Flight Performance
The DJI M300 RTK sets a new standard for drone capability and reliability. The aircraft’s refined airframe and propulsion system design ensures a more efficient and stable flight, even in harsh and difficult conditions.
The aircraft has an increased wind resistance of 15m/s and benefits from an improved IP Rating over it's predecessor. The M300 RTK is an IP45-rated drone meaning that this new release aircraft can withstand more extreme conditions.
IP45 Rating and Waterproofing
IP45 means that the M300 RTK is protected against solid objects greater than 1mm, such as screws and wires.
In terms of the M300 RTK’s waterproofing, the IP45 rating means that the aircraft is protected against low pressure jets of water (splashing water) from any angle. DJI has stated that the drone can withstand rain of 100mm/24h.
To supplement the IP45 rating, the drone can operate in temperatures from -20°C to 50°C, making it a safe and effective platform in a variety of challenging environments.
Maximum Flight Time
The drone’s maximum flight time is 55 minutes (without payload) or 31 minutes when it is at its maximum take-off weight of 9kg.
When carrying the new H2OT sensor, the M300 RTK can stay airborne for up to 42 minutes, or 45 minutes when integrated with either an XT2 or Z30.
Maximum Flight Speed
The DJI M300 RTK has a maximum speed of 23m/s - which equates to just over 51mph and in almost 83kph.
The M300 RTK has a maximum descent speed of 7m/s, ensuring a quick landing. It can also achieve a 7,000m service ceiling.
Multiple Payload Configurations
Mount up to 3 payloads simultaneously
Payload & Gimbal Configurations
The M300 RTK can carry up to three payloads simultaneously (single upward and dual downward gimbal configuration). This means that you can configure the drone to fit your mission needs.
This sturdy aircraft has been built to carry a maximum payload capacity of 2.7kg, achieving a 31 minute flight time when it is fully loaded.
The payload options make the M300 RTK an incredibly versatile aircraft, suitable for search and rescue, law enforcement and public safety, inspection, and aerial surveying.
DJI cameras include the H20 series, and the L1 and P1 surveying options. The M300 RTK can also be integrated with third-party payloads, such as the Wingsland Z15 bright spotlight, the U10 methane detector, and the FLIR Vue TZ20 dual thermal zoom camera.
Zenmuse H20
Triple Sensor Solution
Features
- 20MP Zoom Camera
- 12MP Wide Camera
- 1200m Laser Rangefinder
Zenmuse H20T (Thermal)
Quad Sensor Solution
Features
- 20MP Zoom Camera
- 12MP Wide Camera
- 1200m Laser Rangefinder
- 640×512 px Radiometric Thermal Camera
Zenmuse L1
Livox LiDAR Payload
Features
- Livox LiDAR sensor
- 20MP visual camera
- High-precision IMU
- Point Rate: 240,000 pts/s
Zenmuse P1
Aerial Surveying Camera 
Features
- 45MP full-frame CMOS sensor
- Mechanical Shutter - 1/2000s shutter speed
- Accuracy without GCPs down to 3 cm horizontally / 5 cm vertical
- Up to 10 times more efficient than Phantom 4 RTK
DJI Smart Controller Enterprise
A Smart Controller For A Smart Flight
DJI Smart Controller Enterprise
The M300 RTK comes with the all new DJI Smart Controller Enterprise. This device - similar to the popular Smart Controller for the Mavic Series - features an ultra-bright 5.5-inch 1080p display which maintains clear visibility, even in direct sunlight.
Thanks to the DJI Smart Controller Enterprise, pilots are assured of aviation-grade situational awareness. The drone has a new Primary Flight Display which integrates flight, navigation, and obstacle information.
Improved Transmission System
The M300 RTK is equipped with DJI’s all new OcuSync Enterprise, which enables transmission up to 15km away (FCC, or 8KM CE) and supports triple channel 1080p video (only supported with Dual RC).
To ensure a more reliable flight near high-interference environments, the M300 RTK benefits from the ability to auto-switch between 2.4GHz and 5.8GHz in real-time.
The drone is also equipped with AES-256 encryption, offering safe and secure data transmission.
Smarter Tracking
M300 RTK operators can also utilise the PinPoint, SmartTrack and Location Sharing functions to maximise efficiency. So, how do the Smart Pin and Track functions (only supported when aircraft paired with H20 Series) help?
PinPoint: A quick tap marks an object in view, and advanced sensor fusion algorithms immediately deliver its coordinates.
SmartTrack: Identify and follow moving subjects with the auto-zoom function, while acquiring the subject;s dynamic location.
Location Sharing: When PinPoint or SmartTrack is enabled, the subject’s location can be projected across multiple camera views to another remote controller or shared through online platforms, such as DJI FlightHub (support for location sharing via DJI FlightHub coming soon).
Advanced Dual Control
The DJI M300 RTK comes with advanced dual control. This enables operators to switch aircraft control in-flight, greatly aiding complex or long-distance missions.
Thanks to Advanced Dual Control, BVLOS missions are now possible. This option means that, with just a single tap, either operator can obtain control of the aircraft or payload. This enables the drone to take-off and land in different locations with different pilots and creates new possibilities for mission strategies, as well as higher flexibility during operations.
Designed for Enterprise
A New Standard for Commercial Drones
Smart Inspection
The sophisticated M300 RTK has been built to maximise efficiency and provide accurate data capture - thanks to the drone’s new Smart Inspection capabilities, which include:
Live Mission Recording: Record mission actions such as aircraft movement, gimbal orientation, photo shooting, and zoom level to create sample mission files for future automated inspections.
AI Spot-Check (only supported with H20 payloads): Automate routine inspections and capture consistent results every time. Onboard AI recognises the subject of interest and identifies it in subsequent automated missions to ensure consistent framing. This means that when the mission is executed next time, the gimbal will automatically search the framed object to deliver accurate and consistent results.
Waypoints 2.0: Create up to 65,535 waypoints and set multiple actions for one or more payloads, including third-party ones, at each waypoint. Flightpath planning is also optimised to maximise flexibility and efficiency for your missions.
Advanced Flight Safety
To enhance in-flight safety and aircraft stability, dual-vision and TOF sensors appear on all six sides of the aircraft, offering a maximum detection range of up to 40m, with options to customise the aircraft’s sensing behavior via the DJI Pilot App.
Even in complex operating environments, this six Directional Sensing and Positioning system helps keep the aircraft and the mission safe.
The M300 RTK also benefits from advanced built-in redundancy systems (Dual IMU, Dual Barometer, Dual Compass, and Dual RTK Antenna and GNSS Module). Tts Dual Battery provision and 3 propellor emergency landing will help maintain control of your aircraft in an emergency.
Matrice 300 RTK Accessories
Keep the mission going for longer with enterprise accessories
TB60 Intelligent Flight Battery
With this new drone comes a new battery, in the form of the TB60 Intelligent Flight Battery.
TB60 is high-capacity and hot-swappable, enabling operators to change batteries without powering off, saving time during critical missions.
BS60 Battery Station for M300
The new Battery Station helps you take your flight further. This sophisticated power bank manages up to eight flight batteries and four remote controller batteries, while fast charging allows you to conduct your missions without running out of power.
This all-in-one charging and storage solution charges two batteries to full capacity within 60 minutes to enable continuous flight time.
D-RTK 2 Mobile Station
Gain improved relative accuracy with centimetre-level precision positioning data using the D-RTK 2 High Precision GNSS Mobile Station, which supports all major global satellite navigation systems and provides real-time differential corrections.
The D-RTK 2 Mobile Station for Matrice 200 Series V2 and P4R can be upgraded to support M300 RTK. The M300 RTK is also compatible with NTRIP.
CSM Radar
The CSM Radar further enhances the flight safety of the M300 RTK.
This module has 360° coverage can detect thin obstacles, such as wires and branches, and can detect objects up to 30 metres away. This is a particularly useful accessory for inspections close to powerlines or missions in complex environments.
The radar functions at night and has an IP45 rating, providing safer flights across a larger range of missions.
Managing accidents
Free DJI Enterprise Shield cover with the M300 RTK.
What Happens If You Crash?
You're a commercial drone pilot flying in complex environments; sometimes, accidents happen.
And while the M300 RTK is DJI's safest enterprise drone to date - with an array of safety and redundancy features - it is still essential to have a plan in place, in case the worst does happen.
The M300 RTK is protected by DJI Enterprise Care (Enterprise Shield), which covers against accidental damage caused by pilot error, signal interference, and collisions. It also covers against water damage.
The DJI Care Entperise Basic comes free, as standard, with the M300 RTK. This package offers two replacements (with replacement fee).
A DJI Care Enterprise Plus plan is available (to be purchased separately) which offers an unlimited number of replacements and no replacement fee, as well as a backup device service.
DJI Care Enterprise is also available on the DJI Zenmuse H20 and H20T sensors.
heliguy™ also offers Repair Refresh cover for the M300 RTK, offering one repair/replacement over a 12-month period, with no excess.
These crash-cover policies help to minimise downtime to ensure commercial drone programmes can bring maximum profitibility and results.
Matrice 300 FAQs
Answers to your most common queries.
Yes. To ensure safety, before replacing the gimbal connector, it is recommended to power off the aircraft and remove the TB60 Intelligent Flight Batteries.
The Matrice 300 RTK has a protection rating of IP45. However, the protection rating is not permanently effective and may decrease due to wear and tear. Do not fly in rain heavier than 100mm/24h.
The M300 RTK comes with standard 2110 propellers. You could also use the 2195 high altitude low-noise propellers.
With 220V power supply: It takes about 60 minutes to fully charge two TB60 Intelligent Flight Batteries; and about 30 minutes to charge them from 20% to 90%.
With 110V power supply: It takes about 70 minutes to fully charge two TB60 Intelligent Flight Batteries, and about 40 minutes to charge them from 20% to 90%.
It can simultaneously store eight TB60 Intelligent Flight Batteries and four WB37 Intelligent Batteries. It can charge two TB60 Intelligent Flight Batteries and one WB37 Intelligent Battery at the same time. Batteries with the highest battery levels will be recharged first, followed by the ones with lower levels.
- Before using, mark two TB60 Intelligent Flight Batteries as a pair that will always be charged/discharged together to ensure optimal performance.
- Do not charge immediately after a flight. Let the battery cool down to room temperature before charging.
- The ideal charging temperature of TB60 Intelligent Flight Battery is 15°C-40°C;
- The ideal storage temperature of TB60 Intelligent Flight Battery is 22°C-30°C. Make sure they are stored in an environment that is free of moisture and not in direct sunlight.
- If a battery won’t be in use for more than 10 days, discharge it until the battery level drops to 40% - 65%, and store it properly. Charge and then discharge the battery every three months to keep it healthy.
The operating temperature of the TB60 Intelligent Flight Battery is -20°C to 50°C. When the battery is used in a low-temperature environment, note that the battery life will be reduced. To optimise performance in the cold, it is recommended to warm the battery up to 15°C before use.
When charging the batteries in an environment between -20°C and 5°C, the self-heating function will be activated to raise the battery's temperature to above 5°C.
Once installed on the aircraft and the power is turned on, if the battery’s temperature is low, it will automatically self-heat to keep the temperature at about 16°C to 20°C.
The capacity of the TB60 Intelligent Flight Battery is 274 Wh and cannot be carried on board airplanes according to airline regulations.
When the battery is stored for a long time, to ensure storage safety and to extend battery life, the battery will automatically start self-discharging to about 65%. It’s normal for the battery to feel slightly warm during this process.
The M300 RTK can take off if the voltage discrepancy of the two batteries is within 0.7 V. If it is unable to take off, the app will inform you that ‘the power discrepancy in the two batteries is too large’.
OcuSync Enterprise.
It comes with a built-in 5.5-inch 1920×1080p high-brightness touch screen with a maximum brightness of 1000 cd/m².
Yes. It supports the ZTE MF833V dongle.
No. Due to CrystalSky’s limited processing power of the CrystalSky, it cannot support advanced intelligent functions of the M300 RTK.
Dual Remote Controller Mode: View up to three live feeds simultaneously (including FPV camera);
Single Remote Controller Mode: View of up to two live feeds simultaneously (including FPV camera).
The M300 RTK is compatible with DJI's Zenmuse H20 series, Zenmuse XT S, Zenmuse XT2, Zenmuse Z30, and third-party payloads developed using DJI Payload SDK.
Download the latest firmware of the payloads and update the firmware before using them with M300 RTK.
The M300 RTK can carry three payloads at the same time using the dual downward gimbal connector and the upward gimbal connector.
The M300 RTK supports the following payload configurations:
Single downward gimbal: Zenmuse XT2, Zenmuse XT S, Zenmuse Z30, Zenmuse H20, Zenmuse H20T, and third-party payloads developed on PSDK.
Dual gimbals: Zenmuse XT2 + Zenmuse Z30; Zenmuse XT2 + Zenmuse H20; Zenmuse XT S + Zenmuse Z30; Zenmuse XT S + Zenmuse H20; and one of the above single gimbal with a third-party payload developed on PSDK
Three gimbals: one of the above dual gimbal configurations + a third-party payload developed on PSDK
Note: The Zenmuse XT2 can only be mounted on the right downward gimbal port (Left and right are determined from the perspective of looking directly at the drone from the front).
You can control the movements of each gimbal simultaneously, but you can't take photos/videos simultaneously.
No, the angle of the FPV camera cannot be changed.
Support for PPK is coming soon.
When equipped with a third-party payload designed to capture data at survey-grade accuracy, the M300 RTK can be used to conduct surveying missions. The specific data accuracy depends on the performance and compatibility of the third-party cameras.
Yes. Please refer to the user manual of the M300 RTK and upgrade the firmware of the D-RTK 2 Mobile Station. Please note that different modes need to be selected when using the Mobile Station with the M210 RTK V2, Phantom 4 RTK, or M300 RTK. The D-RTK 2 mobile station only supports one of the three models at a time. For more details, please refer to the user manual.
The M300 RTK obtains real-time differential data in the following two ways:
- By connecting to the D-RTK 2 Mobile Station (RTCM3.2).
- By connecting the remote controller to an NTRIP network RTK service through a 4G dongle or a WiFi hotspot (supports RTCM3.0/RTCM3.1/RTCM3.2).
Yes, there is no limit to the number of drones that can be used simultaneously.
- Via computer: Use DJI Assistant 2 For Matrice by connecting to a computer to update the firmware of the aircraft, remote controller, and D-RTK 2 Mobile Station.
- Via DJI Pilot app: Update the firmware of the aircraft, remote controller, and BS60 Intelligent Battery Station.
Please refer to the user manual for details.
Currently only DJI Pilot App (Android version) is supported. DJI GS Pro will be supported soon.
M300 RTK supports DJI Onboard SDK, Payload SDK, and Mobile SDK.
No. Before purchasing, please confirm with your DJI Enterprise dealer about where the drone can be used.
Drone Laws, Licences and Training Requirements
Drone Registration
Do I need UK drone registration?
Yes, you will need to register. Visit the CAA’s DMARES website. If you have already registered and have an Operator ID, ensure this is attached to your M300 RTK.
Where Can I Fly?
Without taking a drone training course, you will have to fly by the rules of the Open Category’s A3 subcategory (fly far from people). This says:
- No uninvolved people present within the area of flight;
- No flight within 150m horizontally of residential, commercial, industrial, and recreational areas.
Want more freedom? Take a drone training course.
Recommended Training
GVC
The recommended training is a GVC course. A GVC will allow you to apply to the CAA for an Operational Authorisation, which permits flights in the Specific Category.
The Specific Category is for operations that present a greater risk than that of the Open Category, or where one or more elements of the operation fall outside the boundaries of the Open Category. The Specific Category is aimed at enterprise drone operators.
How Do I Get a GVC?
Complete a GVC with Heliguy - a UK CAA-approved Recognised Assessment Entity - through our online training portal.
The GVC involves a syllabus, followed by a multiple-choice examination (sat remotely with Heliguy). Candidates are also required to produce an Operations Manual, and will undergo a practical flight assessment with a flight examiner.
Can I Fly Commercially With a GVC?
Yes. Having a GVC allows you to apply for an Operational Authorisation, which has replaced the Permission for Commercial Operation (PfCO).
What Happens If I Had A Valid PfCO?
Holders of a Standard Permission valid beyond December 31, 2020, will have their permissions brought into line with the new Operational Authorisation (which has replaced the PfCO) to enable operations in the Specific Category. On renewal, this permission will become an Operational Authorisation. This means that you will not need to sit a GVC course yet, but will be required to complete a PfCO to GVC conversion course before January 1, 2024.
From January 2023 (End of Transitional Period)
The rules will change for DJI aircraft in their current form. Updated information released nearer the time.
Product Specification
M300 RTK Specs
Aircraft Specs
|
Item |
Spec |
|---|---|
| Dimensions | Unfolded, propellers excluded, 810×670×430 mm (L×W×H) Folded, propellers included, 430×420×430 mm (L×W×H) |
| Diagonal Wheelbase | 895mm |
| Weight (with single downward gimbal) | Approx. 3.6 kg (without batteries) Approx. 6.3 kg (with two TB60 batteries) |
| Max Payload | 2.7kg |
| Max Takeoff Weight | 9kg |
| Operating Frequency | 2.4000-2.4835 GHz 5.725-5.850 GHz |
| EIRP | 2.4000-2.4835 GHz: 29.5 dBm (FCC); 18.5dBm (CE); 18.5 dBm (SRRC); 18.5dBm (MIC). 5.725-5.850 GHz: 28.5 dBm (FCC); 12.5dBm (CE); 28.5 dBm (SRRC). |
| Hovering Accuracy (P-mode with GPS) | Vertical: ±0.1 m (Vision System enabled) ±0.5 m (GPS enabled) ±0.1 m (RTK enabled) Horizontal: ±0.3 m (Vision System enabled) ±1.5 m (GPS enabled) ±0.1 m(RTK enabled) |
| RTK Positioning Accuracy | When RTK enabled and fixed: 1 cm+1 ppm (Horizontal) 1.5 cm + 1 ppm (Vertical) |
| Max Angular Velocity | Pitch: 300°/s, Yaw: 100°/s. |
| Max Pitch Angle | 30° (P-mode, Forward Vision System enabled: 25°) |
| Max Ascent Speed | S mode: 6 m/s P mode: 5 m/s |
| Max Descent Speed (vertical) | S Mode: 5m/s P mode: 3m/s |
| Max Descent Speed (tilt) | S Mode: 7m/s |
| Max Speed | S mode: 23m/s P mode: 17m/s |
| Service Ceiling Above Sea Level | 5000 m (with 2110 propellers, takeoff weight ≤ 7 kg) / 7000 m (with 2195 propellers, takeoff weight ≤ 7 kg). |
| Max Wind Resistance | 15m/s. |
| Max Flight Time | 55 minutes |
| Supported DJI Gimbals | Zenmuse XT2 /XT S /Z30 /H20 /H20T. |
| Supported Gimbal Configurations | Single Downward Gimbal, Dual Downward Gimbals, Single Upward Gimbal, Upward and Downward Gimbals, Triple Gimbals. |
| Ingress Protection Rating | IP45 |
| GNSS | GPS+GLONASS+BeiDou+Galileo |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F). |
Remote Controller Enterprise Specs
| Operating Frequency | 2.4000-2.4835 GHz 5.725-5.850 GHz |
| EIRP | 2.4000-2.4835 GHz: 29.5 dBm (FCC); 18.5dBm (CE); 18.5 dBm (SRRC); 18.5dBm (MIC). 5.725-5.850 GHz: 28.5 dBm (FCC); 12.5dBm (CE); 28.5 dBm (SRRC). |
| External Battery | Name: WB37 Intelligent Battery Capacity: 4920 mAh Voltage:7.6V Type: LiPo Energy: 37.39Wh Charging time (using BS60 Intelligent Battery Station): 70 minutes (15°C to 45°C); 130 minutes (0°C to 15°C) |
| Built-in Battery | Type: 18650 lithium ion battery (5000 mAh @ 7.2 V) Charging: Use a USB charger with specification of 12V / 2A Rated power: 17 W Charging time:2 hours 15 minutes (Use a USB charger with specification of 12V / 2A) |
| Battery Life | Built-in battery: Approx. 2.5 hours Built-in battery+External battery: Approx. 4.5 hours |
| USB Power Supply | 5 V / 1.5 A |
| Operating Temperature | -20°C to 40°C (-4 °F to 104 °F) |
Vision System
| Obstacle Sensing Range | Forward/ backward/ Left/ Right: 0.7-40m Upward/ downward: 0.6-30m |
| FOV | Forward/ backward/ downward: 65° (H), 50° (V) Left/ right/upward: 75° (H), 60° (V) |
| Operating Environment | Surfaces with clear patterns and adequate lighting (> 15 lux) |
Infrared Sensing System
| Obstacle Sensing Range | 0.1-8m |
| FOV | 30° (±15°) |
| Operating Environment | Large, diffuse and reflective obstacles (reflectivity >10%) |
Top and bottom auxiliary light
Effective lighting distance| 5m |
FPV Camera
| Obstacle Sensing Range | 960fps |
| FOV | 145° |
| Frame rate | 30fps |
Intelligent Flight Battery
| Capacity | 5935 mAh |
| Voltage | 52.8 V |
| Battery Type | LiPo 12S |
| Energy | 274 Wh |
| Net Weight: Approx | 1.35kb |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
| Ideal storage temperature | 22°C to 30°C (71.6°F to 86°F) |
| Charging Temperature | -20°C to 40°C (-4° to 104° F) (When the temperature is lower than 5°C, the self-heating function will be automatically enabled. Charging in a low temperature may shorten the lifetime of the battery) |
| Charging time | Using BS60 Intelligent Battery Station: 220V input: 60 minutes (fully charge two TB60 batteries) 30 minutes (charge two TB60 batteries from 20% to 90%) 110V input: 70 minutes (fully charge two TB60 batteries) 40 minutes (charge two TB60 batteries from 20% to 90%) |
What's in the Box
What's in the Box
DJI Matrice 300 RTK
|
Item |
Quantity |
|---|---|
| Aircraft Body | x1 |
| DJI Smart Controller Enterprise | x1 |
| TB60 Batteries for Matrice 300 RTK | x2 |
| BS60 Battery Charging Station | x1 |
| USB Charger | x1 |
| USB-C Cable | x1 |
| WB37 Intelligent Battery | x1 |
| 2110 Propeller (CW) | x2 |
| 2110 Propeller (CCW) | x2 |
| Landing Gear | x2 |
| Spare Stick Cover (pair) | x1 |
| Spare Propeller Holder | x2 |
| Spare Gimbal Damper | x4 |
| USB Cable (with Double A Ports) | x1 |
| Vision System Calibration Plate | x1 |
| Carrying Case | x1 |
| Smart Controller Lanyard | x1 |
| Rubber Port Cover (Set) | x1 |
| MScrews and Tools | x1 |
| Power Lead | x1 |
