XGRIDS Lixel L3 drone and vehicle mounts: Key features and specs

Products

XGRIDS Lixel L3 drone and vehicle mounts: Key features and specs

Dedicated mounts take the XGRIDS Lixel L3 into the air on the DJI Matrice 400 and onto the road, for continuous, high-accuracy point cloud capture across large sites.

XGRIDS has launched dedicated drone and vehicle mounts for the Lixel L3 scanner. They take high-accuracy scanning beyond handheld use and onto large, complex sites, so you can capture continuous, high-quality point clouds on the move and cut time in the field.

The mounts extend the versatility of the L3, so one scanner can now capture on foot, from the air and from the road.

XGRIDS Lixel L3 Drone Mount

The Lixel L3 Drone Mount is compatible with the DJI Matrice 400, which supplies power and RTK through the gimbal port. It lets you scan rooftops, facades and large sites from the air, with less risk to field crews.

An optimised mounting angle and camera orientation give dense, accurately coloured point clouds, with 2 cm absolute accuracy (RMSE) at a 25 m flight height. The mount is quick to fit, and scans are managed from the drone's remote controller.

XGRIDS Lixel L3 Vehicle Mount

The Lixel L3 Vehicle Mount puts the L3 on the road, so you can capture large areas as you drive. It achieves 3 cm absolute accuracy (RMSE) at up to 20 km/h, with a maximum speed of 60 km/h.

Adjustable tilt lets you set the scanner angle for each site, and real-time suction monitoring helps keep the scanner secure while driving. PPK post-processing is supported.

Key specs at a glance

Specification

Drone Mount

Vehicle Mount

Platform

DJI Matrice 400

Vehicle (suction mount)

Best absolute accuracy (RMSE)

2 cm H / 2 cm V at 25 m flight height

3 cm H / 3 cm V at up to 20 km/h

Maximum operating limit

80 m flight height (10 cm H / 8 cm V)

60 km/h (10 cm H / 10 cm V)

Repeatability

3 cm (40 m, 3 m/s)

3 cm (up to 20 km/h)

Point cloud thickness

< 1.5 cm (40 m, 3 m/s)

< 1.5 cm (up to 20 km/h)

PPK post-processing

Not yet supported

Supported

3DGS and mesh

Not yet supported

Not yet supported

Accuracy figures are measured under open sky, with no multipath, optimal GNSS geometry and favourable atmospheric conditions. Actual performance may vary.

Handheld, drone or vehicle: Which setup suits your project?

The new mounts don't replace handheld scanning with the Lixel L3. They give you more ways to capture with the same scanner. Here's how the three setups compare:

Setup

Best for

Example sites

Things to consider

Handheld

Detailed capture of interiors, complex structures, and GNSS-denied spaces

Buildings, plant rooms, tunnels, heritage sites

Slower to cover very large or open sites on foot

Drone Mount

Large or hard-to-reach areas, captured from above

Rooftops, building facades, large open sites

Requires a DJI Matrice 400. PPK, 3DGS, and mesh not yet supported

Vehicle Mount

Fast coverage along roads and drivable routes

Road corridors, estates, campuses, large sites with vehicle access

Best accuracy at up to 20 km/h. 3DGS and mesh not yet supported

Availability

Both mounts are due to ship from December 2026. As an official XGRIDS partner, heliguy™ can help you choose the right setup for your projects. Contact our in-house survey team to find out more.

Frequently Asked Questions

Which drone is the XGRIDS Lixel L3 Drone Mount compatible with?

How accurate is the XGRIDS Lixel L3 when mounted on a drone?

How fast can you drive with the XGRIDS Lixel L3 Vehicle Mount?

Do the XGRIDS Lixel L3 drone and vehicle mounts support 3DGS and mesh outputs?