How do I update the firmware of the DJI Focus Pro LiDAR?
To update the firmware on DJI Focus Pro LiDAR follow the steps below:
1. Use a USB-C cable to connect the DJI Focus Pro LiDAR with a computer. Launch DJI Assistant 2 (Ronin Series), and log into your DJI account.
2. Click on the LiDAR range finder icon to enter the firmware update page, and wait for the firmware list to be updated.
3. Select the firmware version as needed and click Update. Then, wait for the firmware to be downloaded. After the download, the DJI Focus Pro LiDAR will automatically perform the update.
Sources
This answer was generated from information sourced from the following pages:
