The Osmo battery can last up to 60 minutes when you're using the recording or photograph functions. You can also place your Osmo into standby mode, which allows you to prevent the battery draining so fast when the you're not using the camera. In standby mode the intelligent battery can last up to 6 hours.
It's a fairly small battery, making it extremely portable. You can buy cases with space for more than one battery too - which will help keep all of your accessories secure when you're on the move.
The battery level will be shown through the status light on the handle, which will remain green while the battery has sufficient power, and turn red when you're running low.
Make sure your new battery is fully charged before using it in your Osmo.
Fitting the battery is really simple:
Intelligent Battery Extra Functions
|Ensures that the voltages across different cells are equally distributed|
|Overcurrent Protection||Stops charging if there is an unsafe surge in current.|
|Overcharge Protection||Stops charging if the voltage reaches a safe limit.|
|Over-discharge Protection||Stops discharging if the voltage reaches an unsafe limit.|
|Short Circuit Protection||Stops the battery being damaged in the event of a short circuit.|
|Temperature Control||Stops charging if the temperature goes above 40c or below 15c to protect the battery.|
|Battery Level Display||Shows the current level of the battery within the DJI Go App.|
59° to 104° F (15° to 40° C)
14° to 122° F (-10° to 50° C)